Mercedes-Benz 190E Belts and Hoses

Essential Mercedes-Benz 190E Belts and Hoses

CRP – Hose – Fuel (Part No.4L30010817CRP)

Hose - Fuel

from

$486.90
Hose – Fuel

Cohline – Vacuum Hose, 3.5mm x 9mm (Part No.B202012368COH)

Vacuum Hose, 3.5mm x 9mm

from

$7.97
Vacuum Hose, 3.5mm x 9mm

Gates – Automotive XL« High Capacity V-Belt (Part No.9290)

Automotive XL« High Capacity V-Belt

from

$22.49
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:
  • Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
  • Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
  • Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
  • Resists oil, heat, ozone, weather and aging for improved belt life
  • Meets or exceeds SAE J636C specifications
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12" Long, 1.31" Diameter (Part No.B71350)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12" Long, 1.31" Diameter

from

$10.79
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Gates – Straight Heater Hose: EPDM, Direct Fit, 1" Inside Diameter (Sold by foot) (Part No.28413)

Straight Heater Hose: EPDM, Direct Fit, 1" Inside Diameter (Sold by foot)

from

$3.99
Premium hose constructed for long service life.

Product Features:
  • Good resistance to high temperatures for extended periods of time, which prolongs service life
  • Meets SAE 20R3 Standard Wall Class D-2 requirements
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • CAUTION: Do not use for fuel or oil transfer applications
  • CAUTION: Do not use for fuel or oil transfer applications
  • PLEASE NOTE: Item is priced and sold by the foot. See store for details.
See More

INA – Air Conditioning Idler Pulley (Part No.R108125327INA)

Air Conditioning Idler Pulley

from

$94.45
Air Conditioning Idler Pulley

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 6 Inch Length (Part No.80411)

Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 6 Inch Length

from

$7.79
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • Meets Type EC electro-chemical requirements as specified in SAE J1684
See More

Litens – O.E Quality Idler/Tensioner Pulley Direct Fit, Thermoplastic, 70 mm Diameter (Part No.900137A)

O.E Quality Idler/Tensioner Pulley Direct Fit, Thermoplastic, 70 mm Diameter

from

$47.99
This pulley is manufactured by one of the largest original equipment pulley suppliers to ensure proper fit and performance. This pulley is produced for serpentine belt routing applications and conforms to original equipment material, tolerances, and specifications. This replacement part is made in Germany to the O.E. specified design and meets all performance and durability requirements. Heavy duty thermoplastic construction. This is a 70mm O.D. grooved pulley (without flange) for Mercedes-Benz applications. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More

Litens – O.E Quality Idler/Tensioner Pulley Direct Fit, Thermoplastic, 70 mm Diameter (Part No.900064A)

O.E Quality Idler/Tensioner Pulley Direct Fit, Thermoplastic, 70 mm Diameter

from

$37.99
This Litens pulley is manufactured by one of the largest original equipment pulley suppliers to ensure proper fit and performance. This pulley is produced for serpentine belt routing applications and conforms to original equipment material, tolerances, and specifications. This replacement part is made in Canada to the O.E. specified design and meets all performance and durability requirements. Heavy duty thermoplastic construction. This is a 70mm flat pulley (without flange) for Mercedes-Benz applications. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More

Febi – Accelerator Belt Tension Adjuster (Part No.G600260237FEB)

Accelerator Belt Tension Adjuster

from

$34.14
Accelerator Belt Tension Adjuster

Febi – Febi Bypass Hose (Part No.G202025216FEB)

Febi Bypass Hose

from

$11.16
Febi engine cooling products are designed and manufactured to exceed original equipment (OE) specifications and are engineered to operate in the highly-stressful environment of today’s higher performance cooling systems. The Febi line of cooling system hoses are designed to meet OE standards and are subjected to rigorous quality and performance tests.

Product Features:
  • All cooling-water hose inner linings are resistant to electrochemical cracking
  • high strength and resistance to oil, mud, salt, road debris, and ozone
  • Resistance to distilled water and water ethylene glycol mixtures
  • Resistance to air temperatures of up to 125C
See More

Dayco – Molded Heater Hose; EPDM Rubber, 1/2 Inch Diameter, 12 Inch Length (Part No.87312)

Molded Heater Hose; EPDM Rubber, 1/2 Inch Diameter, 12 Inch Length

from

$16.29
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Rein – AT Cooling Hose (Part No.J200034689RIN)

AT Cooling Hose

from

$29.00
AT Cooling Hose

Rein – AT Cooling Hose (Part No.J200035198RIN)

AT Cooling Hose

from

$23.44
AT Cooling Hose

Febi – Accessory Belt Tensioner Kit, OEA Production (Part No.G600414282FEB)

Accessory Belt Tensioner Kit, OEA Production

from

$190.15
Accessory Belt Tensioner Kit, OEA Production

MTC – Air Dist. Hose Conne (Part No.B200571572MTC)

Air Dist. Hose Conne

from

$3.14
Air Dist. Hose Conne

Febi – FEBI Accessory Belt Tensioner (Part No.G600041536FEB)

FEBI Accessory Belt Tensioner

from

$157.45
The FEBI Accessory Belt Tensioner is a direct fit OEM replacement that contains the same high quality craftsmanship as the original equipment it replaces.

Product Features:
  • OE-Equivalent and a direct fit application.
  • High tension spring assembly
  • Precision bearing assembly
  • High quality cast components
  • Durable long life performance.
See More

Stabilus – Belt Tensioner Damper (Part No.G600314301STB)

Belt Tensioner Damper

from

$53.92
The Sachs Stabilus Belt Tensioner Damper is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
  • Manufactured to ensure long lasting performance
See More

Litens – Serpentine Belt Tensioner: 1 Piece (Part No.999061A)

Serpentine Belt Tensioner: 1 Piece

from

$237.99
This Litens aftermarket part is designed and engineered by one of the world’s largest supplier of Original Equipment (O.E.) tensioners. While the appearance is slightly different from the original equipment part, the Litens part maintains Mercedes-Benz original form, fit, and function specifications. The Litens design follows the O.E. choice of using rubber as the spring mechanism. Choosing The Correct Replacement Part: The Litens aftermarket tensioner is marked “Made in Germany”. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More

Dayco – Flex Radiator Hoses; EPDM Rubber, 15.5 In. Long, 1.5 In. to 1.25 In. Inner Dia. (Part No.81081)

Flex Radiator Hoses; EPDM Rubber, 15.5 In. Long, 1.5 In. to 1.25 In. Inner Dia.

from

$17.49
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent spl

Product Features:
  • Designed to meet OE specifications
  • Not suitable for oil or heat transfer
  • Meets SAE J20R4, Class D-2 requirements for improved service hoses
  • This hose is designed to prevent splitting, ballooning, and elongation
See More

Gates – Vulco-Flex« II Flexible Coolant Hose (Part No.25302)

Vulco-Flex« II Flexible Coolant Hose

from

$13.99
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.

Product Features:
  • Improved sealing surface for greater leak resistance
  • High flexibility for easy installation
  • Maximum vehicle coverage with minimum inventory
  • Resistant to heat, oil and ozone
  • Rated for SAE 20R5 Class D-2 performance
  • Temperature Range: up to +257 Deg. F (+125 Deg. C)
  • Note: Gates recommends replacing clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Gates – Vulco« Straight Coolant Hose (Part No.24022)

Vulco« Straight Coolant Hose

from

$1.49
Specially engineered stick hose is ideal for straight coolant/air connections in automotive, stationary engine, industrial and home applications.

Product Features:
  • Heat-resistant cover
  • Cover marked in 1 in. increments to facilitate approximate cut lengths, allows ┐custom fit installations
  • Meets SAE 20R1 Standard Wall Class D-2 requirements
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: For a maintenance free connection, use PowerGrip SB clamps
  • Caution: Do not use for fuel or oil transfer applications
  • PLEASE NOTE: Item is priced and sold by the inch. See store for details.
See More

Gates – V-Ribbed (Heavy Duty) Serpentine Belt: 95.585" Long, 6 Rib Count, Exact Fit (Part No.K060950HD)

V-Ribbed (Heavy Duty) Serpentine Belt: 95.585" Long, 6 Rib Count, Exact Fit

from

$74.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Patented material provides peak performance at prolonged extreme operating temperatures
  • Heavy-duty construction resists cracking and wear, even at extreme temperatures
  • Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
  • Problem solver designed for the toughest applications
  • Consistently outperforms other heavy-duty serpentine belts on the market
  • Engineered to save your fleet money and reduce downtime
  • Tensioner Replacement is Recommended (if equipped)
See More

Dayco – Poly Rib Belt Serpentine Belt; 78 Long, 6 Rib Count (Part No.5060780)

Poly Rib Belt Serpentine Belt; 78 Long, 6 Rib Count

from

$37.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
  • Made in the USA
See More

Gates – Micro-V« Serpentine Drive Belt (Part No.K060950)

Micro-V« Serpentine Drive Belt

from

$55.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

Helping You Find the Right Belts and Hoses for Your Mercedes-Benz 190E

You love your 190E. So we’ve made it easier than ever to help you find Mercedes-Benz 190E Belts and Hoses in our online catalog. Our inventory holds 66 aftermarket and OEM Belts and Hoses for your Mercedes-Benz 190E, ranging from $1.49 to $486.90.

We offer parts from 15 brands trusted to make quality Belts and Hoses for your Mercedes-Benz 190E. Before you buy, take some time to read through customer reviews. We currently have 1,418 reviews of Mercedes-Benz 190E Belts and Hoses from previous customers. Some of the top rated parts include Poly Rib Belt Serpentine Belt; 88.78 Long, 6 Rib Count with 5.0 stars and Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 6 Inch Length with 4.3 stars.

Find your 190E Belts and Hoses here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Mercedes-Benz 190E part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Belts and Hoses Brands for Your Mercedes-Benz 190E

Our inventory holds Belts and Hoses for your Mercedes-Benz 190E from 15 trusted brands. You’ll find OEM and aftermarket parts from brands like Dayco, Driveworks, and Gates, all of which can keep that Mercedes-Benz happy.

Top-Rated Dayco Belts and Hoses

Leading Dayco Belts and Hoses

We carry Dayco brand parts for your Mercedes-Benz 190E across several catalog categories, including Serpentine and V Belts and Heater Hoses. Some of our most reviewed Dayco parts include:
Poly Rib Belt Serpentine Belt; 95.08 Long, 6 Rib Count
from $58.99
(268)
Poly Rib Belt Serpentine Belt; 95.08 Long, 6 Rib Count
Serpentine Belts

FAQs for Mercedes-Benz 190E Belts and Hoses

What are the most purchased Belts and Hoses for the Mercedes-Benz 190E?

Out of 66 Belts and Hoses for the Mercedes-Benz 190E, the most popular in our inventory are:
Poly Rib Belt Serpentine Belt; 95.08 Long, 6 Rib Count
from $40.99
(39)
Poly Rib Belt Serpentine Belt; 95.08 Long, 6 Rib Count
Serpentine Belts
Poly Rib Belt Serpentine Belt; 78 Long, 6 Rib Count
from $37.99
(4)
Poly Rib Belt Serpentine Belt; 78 Long, 6 Rib Count
Serpentine Belts

What are the top-rated Mercedes-Benz 190E Belts and Hoses?

Top-rated Belts and Hoses for your Mercedes-Benz 190E based on customer reviews/ratings are:
Poly Rib Belt Serpentine Belt; 88.78 Long, 6 Rib Count
from $30.99
(4)
Poly Rib Belt Serpentine Belt; 88.78 Long, 6 Rib Count
“EZ install fit great; measured & exactly same as oem”
Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 6 Inch Length
from $7.79
(3)
Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 6 Inch Length
“Great price and fitment!”