Mazda MX-5 Miata Suspension Parts
Top Mazda MX-5 Miata Suspension Parts Categories
We carry over 31 Suspension Parts in inventory for the Mazda MX-5 Miata. If you’re looking for aftermarket Suspension Parts for your Mazda MX-5 Miata, check out all these categories:
Essential Mazda MX-5 Miata Suspension Parts
Whiteline – Shock Absorber to Control Arm Bushing (Part No.W33338)
from
$39.99
Shock absorber advances and demands for improved travel and load bearing has placed extra importance and stress on shock absorber bushings. Whiteline’s superior formulation shock bushings enhance the performance of new and used shock absorbers.
Product Features:
See More
Product Features:
- Internal grease reservoirs provide continual self lubrication for optimum friction management.
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
- Internal grease reservoirs provide continual self lubrication for optimum friction management.
- Specially bonded design for optimised strength typically required in high load bearing applications.
KYB – High Pressure Monotube Gas Strut (Part No.551117)
from
$176.99
The Gas-a-just monotube strut is available as an OE monotube replacement to restore your vehicle’s original capabilities. The KYB Gas-a-just has two separate working chambers: An air-free hydraulic piston and valve area for responsiveness and control, and a second high-pressure nitrogen gas area with a floating piston that provides a comfortable ride during normal driving and adds instant performance on demand.
Product Features:
See More
Product Features:
- The Correct, Monotube-Designed Orem Replacement
- The KYB Gas-A-Just Helps Restore The Designed Control And Handling Of The Mx-5 Miata
- Gas-A-Just Monotubes Are Designed For Vehicles That Work, Tow, And Have Larger, Heavier Tires & Wheels
- High Pressure Monotube Design Separates The Gas And Oil For Fade Free Operation And Instant Response
- Fluid Leaking Can Be A Cause Of Shock Failure, The KYB Gas-A-Just Has An Ultra-Smooth Triple Chrome Plated Chrome Piston Rod To Reduce Seal Wear
- The Higher Gas Pressure Of The KYB Gas-A-Just Responds Quickly To Improve Steering Response
- Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Gas-A-Just Helps Keep Electronic Safety Systems Performing As Designed.
Rare Parts – Strut Mount Kit (Part No.RP53628)
from
$34.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Meets or exceeds OE requirements
- Helps restore vehicle ride.
- Reduces tire wear
Whiteline – Front Lower Control Arm – Inner Front Bushing Kit (Part No.W53413)
from
$39.99
Worn front control arm bushings have a huge influence on vehicle stability, steering precision and braking efficiency. Replace worn bushings to as new condition utilising Whiteline’s advanced synthetic elastomer bushings with core characteristics ensuring superior elasticity, memory and outright durability for all forms of driving applications.
Product Features:
See More
Product Features:
- Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
- Internal grease reservoirs provide continual self lubrication for optimum friction management.
Nolathane – Control Arm – Rear Bushing Kit (Part No.REV043.0066)
from
$113.99
Nolathane control arm bushings are designed to improve vehicle stability, improve handling braking control and alignment. Backed by a limited warranty. Nolathane bushings are made from the highest quality elastomers and are designed to synchronise your suspension system for optimal safety.
Product Features:
See More
Product Features:
- Kit Contains: 24 bushings, 12 Tubes, 4 Washers, Grease, Install Guide
Whiteline – Front Upper Control Arm – Bushing Kit (Part No.W53415)
from
$41.99
Worn front control arm bushings have a huge influence on vehicle stability, steering precision and braking efficiency. Replace worn bushings to as new condition utilising Whiteline’s advanced synthetic elastomer bushings with core characteristics ensuring superior elasticity, memory and outright durability for all forms of driving applications.
Product Features:
See More
Product Features:
- Internal grease reservoirs provide continual self lubrication for optimum friction management.
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
- Internal grease reservoirs provide continual self lubrication for optimum friction management.
Monroe – Quick-Strut Rear Left Suspension Strut and Coil Spring Assembly (Part No.172496L)
from
$284.99
Featuring a vehicle-specific design, Monroe Quick-Strut assemblies are fit checked, ride tested and engineered to restore factory ride height and ride performance. An all-in-one solution, the Monroe Quick-Strut assembly simplifies the installation process by including all the required components in a single unit. With a heritage of delivering leading-edge products for over 100 years, you can count on Monroe for your next repair.
Product Features:
See More
Product Features:
- QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
- RESTORES RIDE HEIGHT – Precisely calibrated to meet the OE design, each application-specific coil spring type is engineered to restore ride height and support the vehicle’s weight
- VEHICLE-SPECIFIC DESIGN – Application-specific coil spring, mount and strut designs ensure optimized ride and handling experience unique to each vehicle profile
- OE QUALITY – Preassembled upper strut mount, coil spring, and strut feature an OE-style design for seamless fit, form, and function
- MAINTAINS VEHICLE CONTROL – Reduces body sway, vibration and road harshness before it reaches the passenger cabin for improved vehicle handling
- IMPROVES STEERING – Premium upper strut mount helps ensure smooth, “like-new” steering precision and prevents noise, vibration, harshness and memory steer
- RUST RESISTANCE – Protective coating resists rust and corrosion while salt spray testing ensures it’s ready for the elements
- BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference Guarantee
- ASSEMBLED IN THE USA – This Quick-Strut assembly is assembled with pride in Paragould, Arkansas from domestic and imported components
- BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference Guarantee. Visit Monroe.com for details.
Whiteline – Trailing Arm Bushing – Lower (Part No.W63386)
from
$35.99
Optimise rear suspension geometry with Whiteline suspension bushings. Often overlooked, Whiteline trailing arm bushings offer superior dynamic alignment precision by controlling excessive movement – providing driver reassurance for more predictable handling.
Product Features:
See More
Product Features:
- Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
- Internal grease reservoirs provide continual self lubrication for optimum friction management.
Monroe – Strut-Mate Rear; Front Suspension Strut Bumper and Bellows Kit (Part No.63628)
from
$41.99
Designed to protect the strut, the Monroe Strut-Mate Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.
Product Features:
See More
Product Features:
- REPLACES DAMAGED JOUNCE BUMPER OR BOOT – Avoid premature strut failure by replacing missing or damaged strut components
- PROTECTS PISTON ROD – Protects piston rod finish from rust and corrosion and helps reduce oil leakage
- KEEPS MOISTURE AND DIRT OUT – Self-draining design eliminates retention of moisture and other unwanted debris
- ENHANCES STRUT LIFE – Delivers protection from severe suspension movement to improve strut durability
- PERFECT PAIRING – Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
- EASY TO INSTALL – Direct fit OE replacement with firm friction connection that helps keep the boot in place
- BUILT TO LAST – Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts
KYB – Jounce Bumper and Bellows (Part No.SB113)
from
$30.49
KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.
Product Features:
See More
Product Features:
- Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
- Poly Foam Bumper Prevents The Strut From Bottoming Out
- Built With Design And Quality That Matches Or Exceeds One
- Protects The Upper Seal And Bushing
KYB – Jounce Bumper and Bellows (Part No.SB101)
from
$21.99
KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.
Product Features:
See More
Product Features:
- Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
- Poly Foam Bumper Prevents The Strut From Bottoming Out
- Built With Design And Quality That Matches Or Exceeds One
- Protects The Upper Seal And Bushing
Carquest Premium – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.18-920100)
from
$173.99
Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.
Product Features:
See More
Product Features:
- Nuts and Bolt: SAE Standard Grade
- Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
- Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
- Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
- Outer Tube: Long-lasting corrosion and rust protection.
- Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
- Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
- Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
- Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
- Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.
Monroe – Quick-Strut Rear Right Suspension Strut and Coil Spring Assembly (Part No.172496R)
from
$284.99
Featuring a vehicle-specific design, Monroe Quick-Strut assemblies are fit checked, ride tested and engineered to restore factory ride height and ride performance. An all-in-one solution, the Monroe Quick-Strut assembly simplifies the installation process by including all the required components in a single unit. With a heritage of delivering leading-edge products for over 100 years, you can count on Monroe for your next repair.
Product Features:
See More
Product Features:
- QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
- RESTORES RIDE HEIGHT – Precisely calibrated to meet the OE design, each application-specific coil spring type is engineered to restore ride height and support the vehicle’s weight
- VEHICLE-SPECIFIC DESIGN – Application-specific coil spring, mount and strut designs ensure optimized ride and handling experience unique to each vehicle profile
- OE QUALITY – Preassembled upper strut mount, coil spring, and strut feature an OE-style design for seamless fit, form, and function
- MAINTAINS VEHICLE CONTROL – Reduces body sway, vibration and road harshness before it reaches the passenger cabin for improved vehicle handling
- IMPROVES STEERING – Premium upper strut mount helps ensure smooth, “like-new” steering precision and prevents noise, vibration, harshness and memory steer
- RUST RESISTANCE – Protective coating resists rust and corrosion while salt spray testing ensures it’s ready for the elements
- BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference Guarantee
- ASSEMBLED IN THE USA – This Quick-Strut assembly is assembled with pride in Paragould, Arkansas from domestic and imported components
- BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference Guarantee. Visit Monroe.com for details.
Carquest Premium – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.18-920099)
from
$173.99
Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.
Product Features:
See More
Product Features:
- Nuts and Bolt: SAE Standard Grade
- Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
- Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
- Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
- Outer Tube: Long-lasting corrosion and rust protection.
- Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
- Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
- Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
- Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
- Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.
KYB – High Pressure Monotube Gas Strut (Part No.551118)
from
$169.99
The KYB Gas-a-just monotube shock absorber has additional performance advantages over the traditional twin-tube design: It can instantly, automatically adjust to your performance needs and never experiences fade due to aeration.
Product Features:
See More
Product Features:
- The Correct, Monotube-Designed Orem Replacement
- The KYB Gas-A-Just Helps Restore The Designed Control And Handling Of The Mx-5 Miata
- Gas-A-Just Monotubes Are Designed For Vehicles That Work, Tow, And Have Larger, Heavier Tires & Wheels
- High Pressure Monotube Design Separates The Gas And Oil For Fade Free Operation And Instant Response
- Fluid Leaking Can Be A Cause Of Shock Failure, The KYB Gas-A-Just Has An Ultra-Smooth Triple Chrome Plated Chrome Piston Rod To Reduce Seal Wear
- The Higher Gas Pressure Of The KYB Gas-A-Just Responds Quickly To Improve Steering Response
- Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Gas-A-Just Helps Keep Electronic Safety Systems Performing As Designed.
PRT – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.920099)
from
$183.99
Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.
Product Features:
See More
Product Features:
- Nuts and Bolt: SAE Standard Grade
- Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
- Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
- Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
- Outer Tube: Long-lasting corrosion and rust protection.
- Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
- Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
- Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
- Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
- Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.
PRT – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.920100)
from
$183.99
Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.
Product Features:
See More
Product Features:
- Nuts and Bolt: SAE Standard Grade
- Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
- Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
- Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
- Outer Tube: Long-lasting corrosion and rust protection.
- Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
- Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
- Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
- Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
- Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.
MOOG – Strut Bellows (Part No.K90460)
from
$36.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Construction and design validated by MOOG engineers
- Engineered to meet or exceed OE requirements
- Incorporates proven design and engineering features
Mazda MX-5 Miata Suspension Parts Categories
Helping You Find the Right Suspension Parts for Your Mazda MX-5 Miata
You love your MX-5 Miata. So we’ve made it easier than ever to help you find Mazda MX-5 Miata Suspension Parts in our online catalog. Our inventory holds 31 aftermarket and OEM Suspension Parts for your Mazda MX-5 Miata, ranging from $10.99 to $284.99.
We offer parts from 9 brands trusted to make quality Suspension Parts for your Mazda MX-5 Miata. Before you buy, take some time to read through customer reviews. We currently have 703 reviews of Mazda MX-5 Miata Suspension Parts from previous customers.
Find your MX-5 Miata Suspension Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Mazda MX-5 Miata part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Suspension Parts Brands for Your Mazda MX-5 Miata
Our inventory holds Suspension Parts for your Mazda MX-5 Miata from 9 trusted brands. You’ll find OEM and aftermarket parts from brands like Moog, KYB, and Monroe, all of which can keep that Mazda happy.
We have KYB parts available for your Mazda MX-5 Miata in categories like Shocks and Struts. Some of the top-rated KYB parts in these categories are:
Top-Rated MOOG Suspension Parts
Leading MOOG Suspension Parts
We carry MOOG brand parts for your Mazda MX-5 Miata across several catalog categories, including Shocks and Struts. Some of our most reviewed MOOG parts include:
FAQs for Mazda MX-5 Miata Suspension Parts
What are the most purchased Suspension Parts for the Mazda MX-5 Miata?
Out of 31 Suspension Parts for the Mazda MX-5 Miata, the most popular in our inventory are:
from
$41.99
This product is not rated
Strut-Mate Rear; Front Suspension Strut Bumper and Bellows Kit
Strut Bellows
