Mazda Exhaust System Kits

The MagnaFlow Off-Road Pro Series Cat-Back Performance Exhaust System 17114 brings additional off-roading prowess and our deep signature exhaust note to your Truck with a weight-optimized, dyno-tested, corrosion resistant and durable stainless steel design engineered to closely hug the undercarriage for improved ground clearance. Exhaust kit 17114 is engineered to produce Very Aggressive exterior and Aggressive interior sound levels. Extensive 3D scanning was used during the development of this Truck exhaust system to create a direct-fit design, enabling a do-it-yourself installation process. 17114’s emissions-legal cat-back design replaces all your truck’s exhaust components from the catalytic converter on back with its 2.5in. diameter mandrel bent main piping that passes through 1 Straight-Through mufflers before ending in a turndown before rear axle exit with 3in. Satin Clamp-On Single Wall Turndown Cut Edge tips. Exhaust system 17114 is produced using advanced CNC precision robotic manufacturing techniques and backed by MagnaFlow’s limited warranty.

Product Features:

• Available for gas or diesel trucks and SUV’s
• High flow straight through design
• 100% Stainless Steel

The MagnaFlow 2014-2018 Mazda 3 Street Series Cat-Back Performance Exhaust System brings out the personality of your 2.0L, 2.5L 2014-2018 Mazda 3 with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.25in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Mazda 3 exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Mazda 3’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15297 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15297 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited finish warranty and limited construction warranty.

Product Features:

• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques
• Dyno-proven performance

The MagnaFlow 2014-2018 Mazda 3 Street Series Cat-Back Performance Exhaust System brings out the personality of your 2.0L 2014-2018 Mazda 3 with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Mazda 3 exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Mazda 3’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15294 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15294 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited finish warranty and limited construction warranty.

Product Features:

• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques
• Dyno-proven performance

The MagnaFlow 2010-2013 Mazda 3 Street Series Cat-Back Performance Exhaust System brings out the personality of your 2.3L 2010-2013 Mazda 3 with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Mazda 3 exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Mazda 3’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15557 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15557 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited finish warranty and limited construction warranty.

Product Features:

• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques
• Dyno-proven performance

The MagnaFlow 2014-2017 Mazda 6 Street Series Cat-Back Performance Exhaust System brings out the personality of your 2.5L 2014-2017 Mazda 6 with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this Mazda 6 exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Mazda 6’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19131 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19131 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited finish warranty and limited construction warranty.

Product Features:

• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques
• Dyno-proven performance

The S-Type optimized combination of packing filament, straight-through core dimensions, perforation pattern and cylindrical shape delivers the intoxicating BORLA(R)Sound of Power with every squeeze of the throttle.

Product Features:

• Slim, Equidistant Space Between Wide Diameter Core And Muffler Wall Provides An Aggressive And Throaty High-Performance Sound
• Exhaust Gas Velocity Maintained Throughout Temperature Range
• Sound Waves – Decibel Level Range
• No Reflective Baffles (Or Chambers), Just A Highly-Evolved Straight-Through Design Proven To Out-Flow An Empty, Straight Pipe
• Aggressive S-Type Sound Under Acceleration, No Drone At Highway Speeds

The MagnaFlow 2007-2009 Mazda 3 Street Series Cat-Back Performance Exhaust System brings out the personality of your 2.0L, 2.3L 2007-2009 Mazda 3 with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.25in. main piping and 2 Straight-Through mufflers ending in a Single Straight Driver Side Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Mazda 3 exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Mazda 3’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16786 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16786 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited finish warranty and limited construction warranty.

Product Features:

• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques
• Dyno-proven performance

The MagnaFlow 2006-2014 Mazda MX-5 Miata Street Series Cat-Back Performance Exhaust System brings out the personality of your 2.0L 2006-2014 Mazda MX-5 Miata with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this Mazda MX-5 Miata exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Mazda MX-5 Miata’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16668 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16668 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited finish warranty and limited construction warranty.

Product Features:

• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques
• Dyno-proven performance

The exhaust sound provides acoustic feedback of engine rpm to aid the driver in critical decisions such as gear selection or throttle input in rev-match shifting. The S-Type optimized combination of packing filament, straight-through core dimensions, perforation pattern and cylindrical shape delivers the intoxicating BORLA(R)Sound of Power with every squeeze of the throttle.

Product Features:

• Slim, Equidistant Space Between Wide Diameter Core And Muffler Wall Provides An Aggressive And Throaty High-Performance Sound
• Highly-Evolved Straight-Through Design Proven To Out-Flow A Straight Pipe
• Built From High Quality T-304 Stainless Steel
• Aggressive S-Type Sound Under Acceleration, No Drone At Highway Speeds

The BORLA(R) Cat-Back(TM) Name Implies The Exhaust System Is Located Behind The Factory Catalytic Converter Where There Factory Emissions Remain Untouched And Vehicle Stays Emissions Compliant. This Remains Distinct From The Axle Back Exhaust System that Is Located Behind The Rear Axle.

Product Features:

• Features Patented Straight-Through And Multi-Core Technology To Unleash Hidden Horsepower
• Increases The Overall Sound Level And Performance
• Cat-Back(TM) Performance Exhaust System Replaces The Factory Exhaust System Following The Same Exhaust Path And Secured Using The Original Vehicle Hangars And Rubber Isolators
• Pioneered The Automotive Exhaust Aftermarket In Exhausts Constructed In Aircraft Grade T-304 Stainless Steel Tubing, A Material With Higher Content Of Carbon And Nickel That Will Not Rust Or Corrode
• Aggressive S-Type Sound Under Acceleration, No Drone At Highway Speeds

Takeda 2-1/2" 304 Stainless Steel Axle-Back Exhaust System with Black Tip

BRExhaust Direct-Fit Replacement Exhaust Kit 106-0879 takes the guesswork out of replacing your exhaust system while providing a reliable and high-quality alternative to the OEM exhaust. You will find all of the gaskets and clamps needed to get the job done in the carefully packaged box. 106-0879’s precision mandrel bent pipes facilitate superior exhaust flow compared to the crush-bent pipes commonly used in competing aftermarket replacement exhaust systems. The multi-piece, bolt-on design ensures the exhaust system is easy to install yourself and fits perfectly to help get you back on the road in no time. No bending or welding is required for installation. This Direct-Fit Exhaust System Kit is designed to fit the 2009-2013 Mazda 6 2.5L. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0879 includes (2) Bolts, (1) 2.25in. U-Bolt Clamp, (2) Nuts, (1) 2in. U-Bolt Clamp, (1) 2-Bolt Gasket and interchanges with OE parts L50540100C, L50540300D, L50540305B. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0879 features durable Aluminized Steel construction and is covered by a limited warranty.

Product Features:

• Bolt-on, multi-piece design for smooth and easy DIY installation around obstructions, ensuring quality fitment and function without requiring fabrication
• Bolt-on, multi-piece design for smooth and easy DIY installation around obstructions, ensuring quality fitment and function without requiring fabrication
• All components, gaskets, clamps, and hardware required, along with installation instructions, are packaged together in a single protective box
• Leaves all emissions equipment intact, maintaining emissions compliance

BRExhaust Direct-Fit Replacement Exhaust Kit 106-0462 takes the guesswork out of replacing your exhaust system while providing a reliable and high-quality alternative to the OEM exhaust. You will find all of the gaskets and clamps needed to get the job done in the carefully packaged box. 106-0462’s precision mandrel bent pipes facilitate superior exhaust flow compared to the crush-bent pipes commonly used in competing aftermarket replacement exhaust systems. The multi-piece, bolt-on design ensures the exhaust system is easy to install yourself and fits perfectly to help get you back on the road in no time. No bending or welding is required for installation. This Direct-Fit Exhaust System Kit is designed to fit the 2004-2011 Ford Ranger 2.3L & 2005-2009 Mazda B2300 2.3L. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0462 includes (1) Donut Gasket, (3) 2.125in. U-Bolt Clamps, (2) Bolts, (2) Nuts and interchanges with OE parts 4L5Z-5230-AA, 5L5Z-5230-A, 7L5Z-5230-A. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0462 features durable Aluminized Steel construction and is covered by a limited warranty.

Product Features:

• All components, gaskets, clamps, and hardware required, along with installation instructions, are packaged together in a single protective box
• Bolt-on, multi-piece design for smooth and easy DIY installation around obstructions, ensuring quality fitment and function without requiring fabrication
• All components, gaskets, clamps, and hardware required, along with installation instructions, are packaged together in a single protective box
• Leaves all emissions equipment intact, maintaining emissions compliance