Mazda CX-5 Exhaust Parts
Top Mazda CX-5 Exhaust Parts Categories
We carry over 20 Exhaust Parts in inventory for the Mazda CX-5. If you’re looking for aftermarket Exhaust Parts for your Mazda CX-5, check out all these categories:
Essential Mazda CX-5 Exhaust Parts
Walker – Ultra EPA Direct Fit Catalytic Converter (Part No.14841)
from
$274.99
Designed to comply with EPA standards while delivering premium performance with assured compliance, Walker® Ultra® Direct-Fit Catalytic Converters provide premium performance and are available for import and domestic OBDII (1996 and newer) vehicles.
Product Features:
See More
Product Features:
- EPA COMPLIANT — For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO or NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
- DIRECT-FIT DESIGNá–áDirect-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installationáthatádoesn’t require specialized fabricationáand/or welding
- KEEPS CHECK ENGINE LIGHT OFFáFOR EMISSIONS CODESá–áOE-style high-technologyáwashcoatáand optimaláprecious metal load delivers required reduction in tailpipe emissionsáto match vehicle application
- STRONGáANDáDURABLEá–áFeatures thick OE-style flanges, hangersáandábrackets for strength andádurability
- APPLICATION-ENGINEERED –áFeatures aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
- BUY WITH CONFIDENCE — Backed by Walker’s structural integrity warranty
MagnaFlow – Universal OEM Grade Federal / EPA Compliant Catalytic Converter (Part No.51205)
from
$194.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51205. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion welds greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Compact, lightweight construction enables installation in confined areas, welding is required
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
Walker – Ultra EPA Direct Fit Catalytic Converter (Part No.16890)
from
$266.99
Designed to comply with EPA standards while delivering premium performance with assured compliance, Walker Ultra Direct-Fit Catalytic Converters provide premium performance and are available for import and domestic OBDII (1996 and newer) vehicles.
Product Features:
See More
Product Features:
- EPA COMPLIANT : For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
- DIRECT-FIT DESIGNá:áDirect-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installationáthatádoesn’t require specialized fabricationáand/or welding
- KEEPS CHECK ENGINE LIGHT OFFáFOR EMISSIONS CODESá:áOE-style high-technologyáwash coatáand optimaláprecious metal load delivers required reduction in tailpipe emissionsáto match vehicle application
- STRONGáANDáDURABLEá:áFeatures thick OE-style flanges, hangersáandábrackets for strength andádurability
- OE-STYLE DESIGNá:áFeatures aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
- BUY WITH CONFIDENCE : Backed by Walker’s 25,000-mile/40,000-kilometer emissionsáandá5-year 50,000-mile/80,000-kilometer structural integrity warranty
Walker – Exhaust Pipe Flange Gasket (Part No.31350)
from
$3.39
Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- HEAT RESISTANT – Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS – Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE – Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL – Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Felpro – Catalytic Converter Gasket (Part No.61593)
from
$12.49
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Taylor Gaskets – Vibe-Lock Bolt (Part No.310072)
from
$49.99
Vibe-Lock Bolt
Walker – Exhaust Clamp (Part No.35336)
from
$2.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS – Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER – Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Clamp (Part No.35337)
from
$8.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS – Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER – Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Pipe Flange Gasket (Part No.31532)
from
$5.19
Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES : Offered in a variety of styles and sizes for a quality vehicle repair
- HEAT RESISTANT : Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS : Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE : Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED : Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL : Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER : Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Resonator And Pipe Assembly, 2.25" Inlet (Id) 2.375" Outlet (Od) (Part No.73103)
from
$62.99
Designed to fit, perform and sound like the original system, Walker welded resonator assemblies use precise tuning technologies to deliver excellent flow characteristics and OE-style sound.
Product Features:
See More
Product Features:
- RESISTS CORROSION – Durable aluminized steel construction and helps reduce corrosion
- FACTORY SOUND – OE-style louvered tubes (where applicable) help reduce radiated noise for factory-style sound quality
- EASY TO INSTALL – Meticulous pipe routing and OE-style hardware, flanges, and brackets for fast, easy installation
- STRONG AND DURABLE – Features thick OE-style flanges, hardware and brackets for strength
- GET MORE MILES FROM YOUR RESONATOR ASSEMBLY – Engineered to fit, perform and sound like the original system
Walker – Exhaust Resonator And Pipe Assembly, 2.375" Inlet (Id) 2.357" Outlet (Od) (Part No.74094)
from
$86.99
Designed to fit, perform and sound like the original system, Walker welded resonator assemblies use precise tuning technologies to deliver excellent flow characteristics and OE-style sound.
Product Features:
See More
Product Features:
- RESISTS CORROSION – Durable aluminized steel construction and helps reduce corrosion
- FACTORY SOUND – OE-style louvered tubes (where applicable) help reduce radiated noise for factory-style sound quality
- EASY TO INSTALL – Meticulous pipe routing and OE-style hardware, flanges, and brackets for fast, easy installation
- STRONG AND DURABLE – Features thick OE-style flanges, hardware and brackets for strength
- GET MORE MILES FROM YOUR RESONATOR ASSEMBLY – Engineered to fit, perform and sound like the original system
Walker – Direct Fit Exhaust Resonator and Pipe Assembly 2.375" Inlet (ID) (Part No.57004)
from
$205.99
Designed to fit, perform and sound like the original system, Walker resonators use precise tuning technologies to deliver excellent flow characteristics and OE-style sound.
Product Features:
See More
Product Features:
- EASY TO INSTALL : Meticulous pipe routing and OE-style hardware, flanges, and brackets for fast, easy installation
- RESISTS CORROSION : Durable aluminized steel construction and helps reduce corrosion
- FACTORY SOUND : OE-style louvered tubes (where applicable) help reduce radiated noise for factory-style sound quality
- STRONG AND DURABLE : Features thick OE-style flanges, hardware and brackets for strength
- GET MORE MILES FROM YOUR RESONATOR ASSEMBLY : Engineered to fit, perform and sound like the original system
Walker – Exhaust Resonator And Pipe Assembly, 2.25" Inlet (Id) 2.25" Outlet (Id) (Part No.73102)
from
$72.99
Designed to fit, perform and sound like the original system, Walker welded resonator assemblies use precise tuning technologies to deliver excellent flow characteristics and OE-style sound.
Product Features:
See More
Product Features:
- RESISTS CORROSION – Durable aluminized steel construction and helps reduce corrosion
- FACTORY SOUND – OE-style louvered tubes (where applicable) help reduce radiated noise for factory-style sound quality
- EASY TO INSTALL – Meticulous pipe routing and OE-style hardware, flanges, and brackets for fast, easy installation
- STRONG AND DURABLE – Features thick OE-style flanges, hardware and brackets for strength
- GET MORE MILES FROM YOUR RESONATOR ASSEMBLY – Engineered to fit, perform and sound like the original system
Walker – Quiet-Flow SS Direct Fit Exhaust Muffler Assembly (Part No.70016)
from
$442.99
Combining the only broad-market stainless-steel body construction with a direct fit OE-style replacement, Walker Quiet-Flow SS muffler assemblies deliver longer life than typical aluminized mufflers and are available for domestic and foreign vehicles.
Product Features:
See More
Product Features:
- CORROSION RESISTANT STAINLESS STEEL : The only broad-market muffler body with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
- EASY TO INSTALL : Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
- BUILT TO LAST : Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- PREMIUM ACOUSTIC CONTROL : OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
- DESIGN VALIDATED : Acoustic and flow tested for quality OE-style sound you can count on
Dorman – Manifold Converter – Not CARB Compliant (Part No.674-600)
from
$1275.00
Manifold Converter – Not CARB Compliant
Walker – Ultra EPA Direct Fit Catalytic Converter with Integrated Exhaust Manifold (Part No.16981)
from
$973.99
Designed to comply with EPA emissions requirements while delivering premium performance with assured compliance, Walker® Ultra® EPA-Compliant Manifold Converters are available for import and domestic OBDII (1996 and newer) vehicles.
Product Features:
See More
Product Features:
- EPA COMPLIANT — For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO or NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
- DIRECT-FIT DESIGN –áBolt-off, bolt-onáOE-style converter with integrated manifold assemblies that attach directly to engine cylinder head and match all downstream connections
- KEEPS CHECK ENGINE LIGHT OFFáFOR EMISSIONS CODESá– OE-style high technologyáwashcoatáand optimaláprecious metal load delivers required reduction in tailpipe emissions to match vehicle application
- STRONGáANDáDURABLE –áFeaturesáthick OE-style flangesáand manifoldsáfor strengtháand durability
- APPLICATION-ENGINEERED –áFeatures aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
- BUY WITH CONFIDENCE — Backed by Walker’s structural integrity warranty
Mazda CX-5 Exhaust Parts Categories
Helping You Find the Right Exhaust Parts for Your Mazda CX-5
You love your CX-5. So we’ve made it easier than ever to help you find Mazda CX-5 Exhaust Parts in our online catalog. Our inventory holds 20 aftermarket and OEM Exhaust Parts for your Mazda CX-5, ranging from $2.99 to $1,275.00.
We offer parts from 5 brands trusted to make quality Exhaust Parts for your Mazda CX-5. Before you buy, take some time to read through customer reviews. We currently have 260 reviews of Mazda CX-5 Exhaust Parts from previous customers.
Find your CX-5 Exhaust Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Mazda CX-5 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Exhaust Parts Brands for Your Mazda CX-5
Our inventory holds Exhaust Parts for your Mazda CX-5 from 5 trusted brands. You’ll find OEM and aftermarket parts from brands like Walker, Taylor Gaskets, and MagnaFlow, all of which can keep that Mazda happy.
We have Walker parts available for your Mazda CX-5 in categories like Catalytic Converters. Some of the top-rated Walker parts in these categories are:
FAQs for Mazda CX-5 Exhaust Parts
What are the most purchased Exhaust Parts for the Mazda CX-5?
Out of 20 Exhaust Parts for the Mazda CX-5, the most popular in our inventory are:
