Mazda 626 Transmission Parts
Top Mazda 626 Transmission Parts Categories
We carry over 73 Transmission Parts in inventory for the Mazda 626. If you’re looking for aftermarket Transmission Parts for your Mazda 626, check out all these categories:
Essential Mazda 626 Transmission Parts
National – Multi-Purpose Seal (Part No.710396)
from
$14.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
Driveworks – Oil Seal (Part No.S-2007N)
from
$3.99
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
ATP – AUTO TRANS BAND (Part No.FX-127)
from
$40.49
AUTO TRANS BAND
ATP – AT CONTR SOLENOID (Part No.NE-44)
from
$735.99
AT CONTR SOLENOID
ATP – AT MASTER REPAIR KIT (Part No.FM-45)
from
$414.99
AT MASTER REPAIR KIT
Imperial – Mounting Kit System (Part No.226201)
from
$11.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Imperial mounting kit system
- For installation of transmission coolers and electric fans
- Provides quick, effective installation of Imperial products
- Contains nylon mounting rods, foam pads and locking buttons
- Aftermarket electric fan and cooler mounting rods
- Made with the highest quality materials
- Quality machined for durability
- Removable buttons for relocation
- Aftermarket electric fan and cooler mounting rods
- Made with the highest quality materials
- Quality machined for durability
- Removable buttons for relocation
Anchor – Transmission Mount: Rear, 1 Piece (Part No.8512)
from
$13.29
Anchor 8512 This mount supports the transmission and dampens vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1979-1985
- Weight approx: 2 Lbs
Carquest Premium – Neutral Safety Switch (Part No.CSA3775)
from
$105.99
The Neutral Safety Switch primary function is to prevent starter engagement while the vehicle is shifted into any drive gear (reverse/drive). The switch may also be used to turn the back-up lights on and to provide an input to the 4-wheel drive system on vehicles so equipped.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
- Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
ATP – AT SEAL DRIVE AXLE (Part No.FO-30)
from
$32.99
AT SEAL DRIVE AXLE
Pro-King – Automatic Transmission Remanufactured Torque Converter (Part No.FM89L)
from
$183.99
Remanufactured using industry-leading techniques to assure enhanced torque performance and extended life. Each unit is harmonically balanced and leak tested with any inherent OE weaknesses corrected. Pro-King torque converters are subject to random ISO 9001 quality tests before leaving the factory.
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications
National – Multi-Purpose Bearing (Part No.32008)
from
$36.99
Product Features:
See More
- CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
- PREMIUM MATERIALS: Precision manufactured using high-quality materials for durability and performance
- OE-STYLE DESIGN: Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Pro-King – Automatic Transmission Vacuum Modulator (Part No.MD-30)
from
$24.99
Fully adjustable vacuum modulator to maintain accurate shift points.
Product Features:
See More
Product Features:
- Meets or exceeds OE fit, form and function
Driveworks – Taper Bearing Set (Part No.S-A-17)
from
$10.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)
from
$25.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Transmission cooler reinstallation kit
- Contains part numbers 248001, 226201, 240250 and 4 hose clamps
- Provides all hardware for reinstallation of Imperial transmission coolers
- Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
- Made of high grade nylon for easy installation
- Removable buttons for cooler/fan relocation
- Made for both transmission coolers and electric fan installation
- Comes with Quick Connect coupler
Spartan – Automatic Transmission Assembly; Ford FWD CD4E 4-Speed (Part No.3063B-F67)
from
$2557.00
Our remanufactured transmissions have improved torque converters included with every transmission to eliminate the possibility of front seal leaks, vibration or premature bushing wear, All torque converters are tested for leaks, lock-up, concentricity & balance. Every fully remanufactured valve body, with complete system correction & recalibration kit, is tested independently & includes updated throttle valve, manual valve, 4-spool switch valve, pressure regulator valve & governor plugs for improved shifting, lubrication & performance. All wear-prone valves are restored to stringent specifications & vacuum tested to confirm proper function. Each remanufactured transmission is hot, cold, load & simulated road testing. All remanufactured transmissions are backed by the industry’s best, no-hassle nationwide warranty(limited).
Product Features:
See More
Product Features:
- Our Remanufactured Transmissions include torque convertors, trans is completely disassembled & checked then reassembled to spec for tolerances, vacuum, seal & balance, all wear parts replaced & sim tested.
- Our Remanufactured Transmissions include torque convertors, trans is completely disassembled & checked then reassembled to spec for tolerances, vacuum, seal & balance, all wear parts replaced & sim tested.
- Transmissions are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
- All of our transmissions are Dyno tested to ensure the highest standard of trouble free service and longevity.
Felpro – Transmission Oil Pan Gasket 14 Bolt Hole One Piece Gasket (Part No.TOS 18644)
from
$7.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Carquest Premium – Multi-Use Connector (Part No.PTA1052)
from
$52.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
ATP – AT SOLENOID SEAL (Part No.JO-15)
from
$4.29
AT SOLENOID SEAL
Carquest Premium – Multi-Use Connector (Part No.PTA1057)
from
$19.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
National – Automatic Transmission Torque Converter Seal (Part No.710446)
from
$16.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; single-lip
- Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
National – Multi Purpose Seal (Part No.221620)
from
$4.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Driveworks – Taper Bearing Set (Part No.S-A-2)
from
$8.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
ATP – Shift Solenoid (Part No.NE-20)
from
$81.99
Shift Solenoid
Imperial – High Performance Transmission Oil Cooler (Part No.240512)
from
$60.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Imperial high-performance transmission cooler
- Size: 3/4″ x 7-1/2″ x 12-1/2″
- SAE 45-degree fittings for maximum reliability
- Electrostatic powder-coated to prevent corrosion
- SAE 45 degree fittings for maximum reliability
- Electrostatically powder coated to prevent corrosion
- All aluminum lightweight construction
- SAE 45 degree fittings for maximum reliability
- Electrostatically powder coated to prevent corrosion
- All aluminum lightweight construction
Imperial – Plate and Fin Style Transmission Cooler, Light Duty, 3/4" x 5-7/8" x 11" (Part No.243006)
from
$61.99
The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.
Product Features:
See More
Product Features:
- Imperial Rapid-Cool plate and fin transmission cooler
- Size: 3/4″ x 11″ x 6″
- Sub-compact to compact cars
- GVWR up to 18,000 lbs.
- Compatible with OEM cooler systems
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Mazda 626 Transmission Parts Categories
Helping You Find the Right Transmission Parts for Your Mazda 626
You love your 626. So we’ve made it easier than ever to help you find Mazda 626 Transmission Parts in our online catalog. Our inventory holds 73 aftermarket and OEM Transmission Parts for your Mazda 626, ranging from $3.99 to $2,557.00.
We offer parts from 13 brands trusted to make quality Transmission Parts for your Mazda 626. Before you buy, take some time to read through customer reviews. We currently have 10,423 reviews of Mazda 626 Transmission Parts from previous customers. Some of the top rated parts include Plate and Fin Style Transmission Cooler, Heavy Duty, 3/4" x 9-1/2" x 11" with 4.5 stars and Maxi-Kool XL Transmission Oil Cooler with 5.0 stars.
Find your 626 Transmission Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Mazda 626 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Transmission Parts Brands for Your Mazda 626
Our inventory holds Transmission Parts for your Mazda 626 from 13 trusted brands. You’ll find OEM and aftermarket parts from brands like Imperial, Driveworks, and National, all of which can keep that Mazda happy.
We have ATP parts available for your Mazda 626 in categories like Automatic Transmission Parts. Some of the top-rated ATP parts in these categories are:
Top-Rated Imperial Transmission Parts
Leading Imperial Transmission Parts
We carry Imperial brand parts for your Mazda 626 across several catalog categories, including Transmission Cooler and Parts. Some of our most reviewed Imperial parts include:
FAQs for Mazda 626 Transmission Parts
What are the most purchased Transmission Parts for the Mazda 626?
Out of 73 Transmission Parts for the Mazda 626, the most popular in our inventory are:
What are the top-rated Mazda 626 Transmission Parts?
Top-rated Transmission Parts for your Mazda 626 based on customer reviews/ratings are:
from
$80.99
(8)
Plate and Fin Style Transmission Cooler, Heavy Duty, 3/4" x 9-1/2" x 11"
“Used this cooler to replace the missing factory one on my Polaris 330 ATV. Made an adapter plate to fit to the fan housing. Works great, beats the $30”
from
$73.99
(7)
Maxi-Kool XL Transmission Oil Cooler
“this transmission oil cooler is replacing my one on my 2000 dodge dakota its priced right mid size and easy to put in the ome one is 250 this is 60 an”
