from

$14.79

Make better electrical repairs and accessory installations with this pigtail connector. Designed for a clean appearance when installed, it features weatherproof terminals and a locking tab for a reliable quick disconnect electrical connection.

Product Features:

Professional appearance – this electrical pigtail is designed for a clean, professional look when installed
Convenient solution – this pigtail connector allows the circuit to be quickly disconnected for service or occasional use
Durable construction – this pigtail connector features weatherproof seals and a locking tab for a reliable connection
Versatile component – this connector can be used in a variety of repairs and custom installations

from

$37.70

Monroe Strut-Mate mounting kits are direct fit replacements designed to complement the ride control characteristics of Monroe struts. In addition, our full line will provide you with late model original equipment coverage. When doing strut replacements, it is important to do the complete job. This means not only replacing the struts but also inspecting and replacing worn strut mounts. Remember, worn strut mounts can adversely affect a vehicle’s safety and handling. Not only are strut mounts a necessary component of the suspension system, they consist of rubber to metal bonded parts that wear out over time as well. Worn bearings may also cause noise, steering binding, vibration and vehicle pull. Strut-Mate mounting kits can include:

Product Features:

Strut Mount
Bearing
Upper Spring Isolator
Lower Spring Isolator
Upper Spring Seat

from

$139.99

SuspAirBag/Bellows

from

$14.99

KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.

Product Features:

The Highest Quality Replacement Strut Mount Available
Optimizes Suspension Performance By Offering Original Equipment Quality Replacement Components Designed For Each Application
Superior Rubber Reduces Noise, Vibration And Harshness
Mount Bearings Provide Smoother Steering And Help Retain Front End Alignment
Matched Grade Studs And Nuts

from

$104.99

Shock Kit

from

$6.29

POWER STEERING FLUID

from

$25.99

Monroe® is one of the automotive industry’s best-known and most trusted original equipment and aftermarket brands, having delivered innovative undercar solutions to leading global OE manufacturers and generations of professional technicians and vehicle owners. This heritage of leading-edge products and exceptional customer support has made Monroe® shocks, struts and other ride control components a preferred choice of automotive professionals worldwide.

from

$133.99

Arnott’s popular rear air spring A-2105 for the 1990-2011 Lincoln Town Car, and 1992-2011 Ford Crown Victoria and Mercury Grand Marquis enables you to quickly replace your leaking air spring. This air spring is assembled and tested for Arnott by world-renowned Continental. The air spring is made with a high impact resin top and bottom mount, a multi-ply ContiTech air sleeve and includes a new seal kit. The air spring bladder has a tested burst pressure of more than 480 PSI … six times its normal working pressure! Arnott recommends changing the Dryer when replacing air springs. Moisture in your system may damage the compressor.

from

$59.99

At Suncore Industries, we will endeavor to provide High Quality & Reliability Air Suspension Products. Everything we do will encompass successfully addressing the need for exceptional Customer Satisfaction and Product Quality & Reliability. We understand how frustrating it can be to have a part not perform to expectations. We are mechanics and car owners too. Our mission is to provide you with the level of quality you deserve.

Product Features:

Air Bellow Produced For Suncore By Goodyear
Lifetime Warranty
Includes O-Rings
Includes Instructions

from

$282.99

At Suncore Industries, we will endeavor to provide High Quality & Reliability Air Suspension Products. Everything we do will encompass successfully addressing the need for exceptional Customer Satisfaction and Product Quality & Reliability. We understand how frustrating it can be to have a part not perform to expectations. We are mechanics and car owners too. Our mission is to provide you with the level of quality you deserve.

Product Features:

Conversion Assembly

from

$477.69

ARNOTT PART # P-2936 PRODUCT WEIGHT: 7 lbs ORIGINAL EQUIPMENT # F6AZ5319AA, 8W1Z5319A, F1VY5319A Arnott’s aftermarket air suspension compressor P-2936 for the 90-11 Lincoln Town Car and Crown Victoria and 92-11 Grand Marquis features a heavy duty motor, epoxy-coated finish to prevent corrosion, and a new dryer. Built to original equipment specifications, this compressor is an exact fit and now includes an outer support bracket along with an intake air hose and electrical connector for a fast and flawless installation.

Product Features:

Includes Dryer and Intake Air Hose
Heavy Duty Motor Provides a Long Life
Epoxy Electrocoated Finish To Prevent Corrosion
Detailed Installation Manual Available

from

$209.99

At Suncore Industries, we will endeavor to provide High Quality & Reliability Air Suspension Products. Everything we do will encompass successfully addressing the need for exceptional Customer Satisfaction and Product Quality & Reliability. We understand how frustrating it can be to have a part not perform to expectations. We are mechanics and car owners too. Our mission is to provide you with the level of quality you deserve.

Product Features:

1Year Warranty

from

$158.99

Ideal for hauling, Monroe® Max-Air® shock absorbers can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by vehicle suspension, tires and transmission. See vehicle owner’s manual.)

Product Features:

MAINTAIN RIDE HEIGHT UNDER LOAD — Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission, see owner’s manual)
EASY TO ADJUST — Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor, pair with Monroe air shock accessory and shock air hose AK kits (varies by application)
EXCEPTIONAL HANDLING — Full-displaced valving on compression and extension cycles for a smooth ride
BUILT TO LAST — Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation
CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
Special Air Fitting: Resists air leakage.

from

$40.99

This suspension solenoid is designed to match the fit and function of the original solenoid on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this suspension solenoid is designed to match the fit and function of the original solenoid on specified vehicles
Ideal solution – this solenoid is a reliable replacement for an original part that is damaged or has failed due to fatigue, excessive heat or electrical current
Durable construction – this solenoid is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$15.79

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

High-quality products that meet OE appearance and performance to

from

$776.99

Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:

Designed To Provide Inflation Control Of Your Air Helper Springs
Provides An Instant Air Source For The Air Helper Springs Or Accessories
Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
Light Duty Compressor Specs (120 Pounds Per Square Inch Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)

from

$1217.99

Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:

Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
Provides An Instant Air Source For The Air Helper Springs Or Accessories
Dual Point Fill (Both Air Springs Fill Independently Of Each Other)

from

$21.99

This air suspension compressor line repair kit is designed to match the original components required to repair the air suspension compressor on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

Upgraded replacement – this air suspension compressor line repair union directly replaces the original with stronger material
Increased durability – brass construction prevents future failures from original brittle plastic design
Application specific – this union is made for a wide range of Ford, Lincoln and Mercury vehicles
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

from

$87.99

This air suspension compression dryer is designed to match the fit and function of the original dryer on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this air suspension compression dryer is designed to match the fit and function of the original dryer on specified vehicles
Restores functionality – reliable replacement for an original dryer that is leaking, clogged or failed due to damage
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$24.49

KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.

Product Features:

The Highest Quality Replacement Strut Mount Available
Optimizes Suspension Performance By Offering Original Equipment Quality Replacement Components Designed For Each Application
Superior Rubber Reduces Noise, Vibration And Harshness
Mount Bearings Provide Smoother Steering And Help Retain Front End Alignment
Matched Grade Studs And Nuts

from

$33.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features: