Lincoln MKZ Drivetrains
Top Lincoln MKZ Drivetrains Categories
We carry over 38 Drivetrains in inventory for the Lincoln MKZ. If you’re looking for aftermarket Drivetrains for your Lincoln MKZ, check out all these categories:
Essential Lincoln MKZ Drivetrains
Valvoline – ATF for Mercon®V Applications Conventional, 1 Quart (Part No.822345)
from
$12.99
Valvoline ATF for MERCON®V Applications is a high-quality transmission fluid meeting and exceeding the requirements of the Ford Mercon V specification which covers most Ford passenger cars and light-duty trucks (except those specifying MERCON®SP, MERCON®LV or Type F fluids), including Lincoln and Mercury, as well as most pre-2006 GM vehicles and many imports. Recommended for use in the following applications: MERCON®V, MERCON®, DEXRON®-III, DEXRON®-II, Caterpillar TO-2, Allison C-4. Other applications include Power steering fluid where a DEXRON® or MERCON® fluid is recommended. Suitable to use in Nissan Matic D, Matic J and Matic K.
Product Features:
See More
Product Features:
- Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
- Enhanced anti-shudder protection for smooth shifting and maximum power transfer
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
Cardone – Rear Drive Shaft: Not Greasable, Direct Replacement (Part No.65-2000)
from
$669.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.
Product Features:
See More
Product Features:
- Built to match O.E. form, fit and function.
- 100% NEW universal joints are installed to ensure proper fit and optimal performance.
- All slip yokes are lubricated to prevent premature wear.
- Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
SKF – Diff. Side Cover Sea (Part No.J7041325694SKF)
from
$19.60
Diff. Side Cover Sea
National – Multi Purpose Seal (Part No.100552)
from
$6.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: springless; single-lip
- Temperature range: -100°F to 450°F; -73°C to 232°C
- Resistant to hydrocarbon/oxygenate blends and provides superior performance
- Provides excellent dry running capabilities, low coefficient of friction and excellent resistance to chemicals
- Delivers quality and reliable performance for every type of repair
EMPI – Axle Shaft Nut (Part No.K403055043EMP)
from
$6.38
The EMPI Axle Shaft Nut is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Motorcraft – Wheel Hub (Part No.K7000283140MTR)
from
$128.59
Original equipment-specification hubs and bearings for Ford and Lincoln vehicles. Ford Parts hubs are micro-ground to help ensure the smoothest possible interface for nesting/mating with the rotor. Any runout wobble or imperfection on the rotor mounting surface of a hub, such as some found in the aftermarket, can be magnified by two times in the brake pad and cause premature wear and comebacks.
Product Features:
See More
Product Features:
- Testing, engineering and manufacturing tolerances held to 25 microns – three times thinner than a piece of paper – compared with some competitors at 250 microns
- Optimized sealing effect and a low torque-to-turn ratio to minimize drag and help increase fuel economy
- Special bearing seals to help keep out contaminants, the number one cause of bearing failure
- Proprietary technology in the design and assembly process, where applicable, that is difficult to reverse engineer, helps ensure quality and helps reduce comebacks
- Patented micro-grinding process, where applicable, that helps ensure the smoothest possible hub and rotor interface while helping to avoid premature brake wear and vibration
- Helps avoid costly comebacks from pad, rotor or suspension parts problems that aftermarket replacement hubs may contribute to
- Meets original equipment test specifications for each specific application Ford Parts hubs don’t compromise quality
- Triple-sealed bearing assembly lubricated-for-life original equipment hub units provide excellent sealing performance
- Integral bearing races specifically designed to each application, no one-size-fits-all solution
- Precision forging Materials, engineering and production processes minimize any possibility of the hub cracking
- Micro-ground hub-to-rotor mating surface – tolerances held below 25 microns to help prevent noise and vibration
- Original equipment specifications minimize any possibility of the hub cracking
- Original equipment ABS sensor ring and sensor pigtail feature high-strength polymer and copper wiring for positive connections and conductivity, providing excellent ABS signal
- Tapered roller bearings for high load rates when specified
National – Multi Purpose Seal (Part No.710429)
from
$19.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Transfer Case Output Shaft Seal (Part No.99156)
from
$24.99
Transfer Case Output Shaft Seal
Dorman – Drive Shaft Repair Kit – Only Fits Dorman Driveshafts (Part No.932-982)
from
$53.99
This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle
- Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest Premium – CV Axle Shaft Assembly (Part No.NCV512001)
from
$98.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% new axle and components
- New axle nut or attaching hardware included when applicable
- Bearings, races and housings are heat-treated for longer life
- Precision-engineered seal mating surfaces for leak-free performance
- High moly CV joint grease with stainless-steel boot bands
Carquest Premium – CV Axle Shaft Assembly (Part No.NCV714091)
from
$98.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% new axle and components
- New axle nut or attaching hardware included when applicable
- Bearings, races and housings are heat-treated for longer life
- Precision-engineered seal mating surfaces for leak-free performance
- High moly CV joint grease with stainless-steel boot bands
Motorcraft – Axle Shaft Bearing Carrier (Part No.K4045447543MTR)
from
$408.99
The Motorcraft Axle Shaft Bearing Carrier is an OES replacement component that provides the same performance, durability, and service life as your factory original equipment.
Product Features:
See More
Product Features:
- OES replacement part for your vehicle’s original factory component
- Offering the quality, reliability, and durability of OES
- Manufactured to OES specification for fit, form, and function
National – Shaft Repair Sleeve (Part No.99139)
from
$39.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
EMPI/Empire – CV Joint Boot Kit (Part No.K6010458515EMP)
from
$43.18
With Clamps and Grease The EMPIRE CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. Install one boot kit per wheel to restore vehicle to optimal condition and protect the constant velocity joint from contamination
Product Features:
See More
Product Features:
- Help restore the vehicle to like-new condition
- Constructed of high strength OE materials
- Resists environmental contamination
- Protects the CV joint from premature failure
EMPI – RE CV Joint Boot Kit (Part No.K6010182757EMP)
from
$29.43
The EMPIRE CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. Install one boot kit per wheel to restore vehicle to optimal condition and protect the constant velocity joint from contamination
Product Features:
See More
Product Features:
- Help restore the vehicle to like-new condition
- Constructed of high strength OE materials
- Resists environmental contamination
- Protects the CV joint from premature failure
Beck/Arnley – Axle Nuts (Part No.103-0533)
from
$4.49
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- Made with premium grade materials
- Quality construction for durability
- Designed for under vehicle environment
- Application specific for this vehicle
Beck/Arnley – Axle Nuts (Part No.103-0502)
from
$11.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- Made with premium grade materials
- Quality construction for durability
- Designed for under vehicle environment
- Application specific for this vehicle
Dorman – Power Take Off Assembly (Part No.600-239)
from
$1471.99
This power take off assembly, or PTU, directly replaces the stock assembly on specific vehicle years, makes and models. Each PTU is newly manufactured and rigorously tested to restore original performance.
Product Features:
See More
Product Features:
- Direct replacement – this power take off assembly matches the function and performance of the original PTU on certain vehicle applications
- Effective fix – restores drivability and all-wheel drive (AWD) functionality after original PTU fails
- Durable construction – built for reliable longevity, free of defects in materials and workmanship
- Trustworthy quality – backed by team of designers and engineers in the United States
Driveworks – Camshaft Seal (Part No.S-99139)
National – Shaft Repair Sleeve (Part No.99166)
from
$34.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
SKF – MT Output Shaft Seal (Part No.J11571519888SKF)
from
$15.28
MT Output Shaft Seal
Lincoln MKZ Drivetrains Categories
Helping You Find the Right Drivetrains for Your Lincoln MKZ
You love your MKZ. So we’ve made it easier than ever to help you find Lincoln MKZ Drivetrains in our online catalog. Our inventory holds 38 aftermarket and OEM Drivetrains for your Lincoln MKZ, ranging from $4.49 to $1,471.99.
We offer parts from 12 brands trusted to make quality Drivetrains for your Lincoln MKZ. Before you buy, take some time to read through customer reviews. We currently have 19,621 reviews of Lincoln MKZ Drivetrains from previous customers. Some of the top rated parts include Multi Purpose Seal with 5.0 stars and Shaft Repair Sleeve with 5.0 stars.
Find your MKZ Drivetrains here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Lincoln MKZ part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Drivetrains Brands for Your Lincoln MKZ
Our inventory holds Drivetrains for your Lincoln MKZ from 12 trusted brands. You’ll find OEM and aftermarket parts from brands like Valvoline, Carquest Premium, and National, all of which can keep that Lincoln happy.
We have Beck/Arnley parts available for your Lincoln MKZ in categories like Spindles. Some of the top-rated Beck/Arnley parts in these categories are:
Top-Rated Valvoline Drivetrains
Leading Valvoline Drivetrains
We carry Valvoline brand parts for your Lincoln MKZ across several catalog categories, including Differentials. Some of our most reviewed Valvoline parts include:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for Lincoln MKZ Drivetrains
What are the most purchased Drivetrains for the Lincoln MKZ?
Out of 38 Drivetrains for the Lincoln MKZ, the most popular in our inventory are:
What are the top-rated Lincoln MKZ Drivetrains?
Top-rated Drivetrains for your Lincoln MKZ based on customer reviews/ratings are:
from
$6.99
(2)
Multi Purpose Seal
“I installed this seal on a 2003 4WD Ford Escape. It is the front seal (pinion) on the rear differential. It fixed the leak I had right where the dri”
from
$41.99
(1)
Shaft Repair Sleeve
“Fixed my Ford F-150 4.2. Fit well and installation tool seated the sleeve exactly where it needed to be. Super easy to use and covered the grooved s”
from
$39.99
(1)
Shaft Repair Sleeve
“used these speedy sleeves on the front axle of my Kubota with the wheel seals,saved me from spending 15 times more on the axle’s, Thank’s”
