ARP Auto Racing For Use With Ford Small Block 289/ 302, Hex Head, 180000Psi Tensile, 154-3601

from

$82.99

High Performance head bolts are available with a reduced wrenching hex or 12 point and wide area flanged head that eliminates the need for valve train removal to facilitate cylinder head retorquing. All High Performance Series bolts are 180,000 PSI (which is 15 Percent stronger than Grade 8) and kits come complete with hardened parallel ground washers.

Sealed Power Engine Valve Lifter, HT-900

from

$13.79

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

"Edelbrock Performer Small-Block Ford 5.0L/ 5.8L Cylinder Head 1.90"", 60379"

from

$1389.00

“Edelbrock Performer Small-Block Ford 5.0L/ 5.8L Cylinder Head 1.90″”, 60379. ”

Sealed Power Engine Rocker Arm Ball Stud, MR-1847

from

$1.49

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

"Edelbrock Valve Seat For S/B Chevy Heads With 1.60"" Valves, 9711"

from

$86.99

The Edelbrock No. 9711 Intake Valve Seat set is a replacement for Edelbrock cylinder heads.

Edelbrock Victor Jr Small-Block Ford Cylinder Head Bare, 77219

from

$858.99

Edelbrock Victor Jr Small-Block Ford Cylinder Head Bare, 77219.

"Competition Cams Rocker Arm Stud Girdle for Ford 289, 302 and 351W with 7/16"" Stud, 4014"

from

$427.99

“Competition Cams Rocker Arm Stud Girdle for Ford 289, 302 and 351W with 7/16″” Stud, 4014. ”

Felpro PermaTorque Engine Cylinder Head Gasket, 8548 PT-2

from

$37.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Dorman STD Cylinder Head Bolt, 7/16-14 X 3.938 X 1-1/16 In., Hex 5/8 In. (Sold by each), 675-131

from

$4.29

This engine cylinder head bolt directly replaces the original bolt on specific vehicle years, makes and models.

Dorman Steel Cup Expansion Plug 13.70mm, Height 0.180 (Sold by each), 555-007

from

$1.79

This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

from

$83.99

Available in various sizes, heights, and finishes, Spectre offers a wide variety of high performance valve covers designed to easily replace your stock covers. Designed for Ford Small Block 260-289-302-351W engines, this valve cover features chrome-plated steel construction and a smooth design. Sold in pairs, this stock profile cover is baffled to provide optimum function. With show quality construction and a sealing edge designed for an ideal fit, our valve covers are engineered to look great for applications ranging from custom builds to replacing stock equipment.

from

$211.99

“Edelbrock part No: 9659 Pushrods are designed for small-block Ford 351W V-8 engine applications. These one-piece pushrods are manufactured from high quality 4130 Chromoly steel tubing that has been surface hardened for maximum durability. They have precise formed wedged ends for a high quality fit with the cup seats. A black oxide finish is added for corrosion resistance. Pushrod Specifications: – For use with Edelbrock hydraulic roller lifters No: 97453 – Outside Diameter: 5/16″” – Length: 7.700″””

"ARP Auto Racing For Use With Chevy Small Block, 1.895"" Stud L, Black Oxide, Chrome, Set Of 16, 134-7104"

from

$98.99

If you have ever installed a rocker stud into a cylinder head and watched it wobble as it screwed in, you knew from the beginning that the rocker geometry was going to be inconsistent all over the place. ARP rocker studs are concentric within 0.005 T.I.R. thread pitch to thread pitch. They run in straight and true. Lengths are exact designed to provide positive seating every time. An extra large radius base offers greater resistance to flex. Available in both High Performance and Pro Series models. To be used with ARP patented Perma-Loc(TM) adjusters.

"Competition Cams Stud Girdle for Ford 289, 302, 351W with RHS or Ford Motorsport Head with 7/16"" Stud, 4015"

from

$427.99

“Competition Cams Stud Girdle for Ford 289, 302, 351W with RHS or Ford Motorsport Head with 7/16″” Stud, 4015. ”

"Competition Cams Stud Girdle for Ford 351C Boss with Ford Motorsport Head with 7/16"" Stud, 4016"

from

$452.99

“Competition Cams Stud Girdle for Ford 351C Boss with Ford Motorsport Head with 7/16″” Stud, 4016. ”

from

$154.99

The Edelbrock No: 7364 head gaskets provide the best sealing solution and are matched to Edelbrock cylinder heads for optimal performance. Edelbrock relies on industry leading head gasket manufactures to ensure our head gasket sets will provide the best fit and sealing properties when used with Edelbrock aluminum cylinder heads. Edelbrock head gaskets are manufactured from high-density materials and feature a superior design that performs under pressure and provides a long-lasting seal, without re-torqueing.

Felpro PermaTorque Engine Cylinder Head Gasket Set, HS 8548 PT-11

from

$83.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Melling Select Performance Valve Train Set Up Spring, VTSS100

from

$11.79

Melling Performance valvetrain checking springs feature a low-tension design that allows them to be installed by hand for measuring piston-to-valve clearance, rocker arm ratio, and degreeing in a camshaft.

from

$169.99

The Edelbrock No: 5823 replacement mechanical roller Sure Seat Valve Spring for Edelbrock cylinder heads are made of highest quality spring wire and precision wound to close tolerances.

"Competition Cams Super Valve Locks, 11/32"" 1 St, 611-16"

from

$40.99

Inside tang-to-taper relationship held tightly for repeatable valve spring installed heights

Sealed Power Engine Valve Spring Retainer Keeper, VK-115

from

$0.43

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Remflex Flexible Graphite, Set Of 2, 1-1/4 Inch X 1-5/8 Inch Square Port Size, 3028

from

$37.99

Remflex unique flexible graphite material has been proven for more than 30 years in industrial applications, where temperatures routinely exceed 2,000 degrees – day after day, week after week, year after year. Now, they are bringing this technology to enthusiasts of all kinds to eliminate exhaust leaks for good Whether you have an old pick-up that needs a manifold gasket, or a race car with custom-built headers, you can be assured that Remflex exhaust gaskets will work properly the first time, every time.

Lincoln Mark VI Valve Cover and Cylinder Heads

Your One-Stop Shop For Trusted Lincoln Mark VI Valve Cover and Cylinder Heads

Essential Lincoln Mark VI Valve Cover and Cylinder Heads

ARP Auto Racing – ARP Auto Racing For Use With Ford Small Block 289/ 302, Hex Head, 180000Psi Tensile, 154-3601 (Part No.154-3601)

Sealed Power – Sealed Power Engine Valve Lifter, HT-900 (Part No.HT-900)

Edelbrock – "Edelbrock Performer Small-Block Ford 5.0L/ 5.8L Cylinder Head 1.90"", 60379" (Part No.60379)

Sealed Power – Sealed Power Engine Rocker Arm Ball Stud, MR-1847 (Part No.MR-1847)

Edelbrock – "Edelbrock Valve Seat For S/B Chevy Heads With 1.60"" Valves, 9711" (Part No.9711)

Edelbrock – Edelbrock Victor Jr Small-Block Ford Cylinder Head Bare, 77219 (Part No.77219)

Competition Cams – "Competition Cams Rocker Arm Stud Girdle for Ford 289, 302 and 351W with 7/16"" Stud, 4014" (Part No.4014)

Felpro – Felpro PermaTorque Engine Cylinder Head Gasket, 8548 PT-2 (Part No.8548 PT-2)

Dorman – Dorman STD Cylinder Head Bolt, 7/16-14 X 3.938 X 1-1/16 In., Hex 5/8 In. (Sold by each), 675-131 (Part No.675-131)

Dorman – Dorman Steel Cup Expansion Plug 13.70mm, Height 0.180 (Sold by each), 555-007 (Part No.555-007)

Spectre – Spectre Valve Cover SB Ford OE/BF, 5250 (Part No.5250)

Edelbrock – Edelbrock Pushrod Set, 9659 (Part No.9659)

ARP Auto Racing – "ARP Auto Racing For Use With Chevy Small Block, 1.895"" Stud L, Black Oxide, Chrome, Set Of 16, 134-7104" (Part No.134-7104)

Competition Cams – "Competition Cams Stud Girdle for Ford 289, 302, 351W with RHS or Ford Motorsport Head with 7/16"" Stud, 4015" (Part No.4015)

Competition Cams – "Competition Cams Stud Girdle for Ford 351C Boss with Ford Motorsport Head with 7/16"" Stud, 4016" (Part No.4016)

Edelbrock – Edelbrock Engine Gasket Set, 7364 (Part No.7364)

Felpro – Felpro PermaTorque Engine Cylinder Head Gasket Set, HS 8548 PT-11 (Part No.HS 8548 PT-11)

Melling Select Performance – Melling Select Performance Valve Train Set Up Spring, VTSS100 (Part No.VTSS100)

Edelbrock – Edelbrock Sure Seat Valve Springs, 5823 (Part No.5823)

Competition Cams – "Competition Cams Super Valve Locks, 11/32"" 1 St, 611-16" (Part No.611-16)

Sealed Power – Sealed Power Engine Valve Spring Retainer Keeper, VK-115 (Part No.VK-115)

Remflex – Remflex Flexible Graphite, Set Of 2, 1-1/4 Inch X 1-5/8 Inch Square Port Size, 3028 (Part No.3028)

Lincoln Mark VI Valve Cover and Cylinder Heads List

Valve Cover and Cylinder Heads Brands You Can Trust For Your Lincoln Mark VI

Popular Sealed Power Valve Cover and Cylinder Heads

Most Purchased Lincoln Mark VI Valve Cover and Cylinder Heads from Sealed Power

FAQs for Lincoln Mark VI Valve Cover and Cylinder Heads

What are the most purchased Valve Cover and Cylinder Heads for the Lincoln Mark VI?

What are the top-rated Lincoln Mark VI Valve Cover and Cylinder Heads?

Find Your Lincoln Mark VI Valve Cover and Cylinder Heads by Year

More Popular Parts for All Makes