Lincoln Mark III Performance and Racing Products
Top Lincoln Mark III Performance and Racing Products Categories
We carry over 124 Performance and Racing Products in inventory for the Lincoln Mark III. If you’re looking for aftermarket Performance and Racing Products for your Lincoln Mark III, check out all these categories:
Essential Lincoln Mark III Performance and Racing Products
Mr. Gasket – Ultra Seal: Harmonic Balancer Bolt/Washer Kit (Part No.7847)
from
$45.49
Mr. Gasket Harmonic Balancer Bolt for Ford V8 except 351C. Fits 221,260,289,302,351W small block Windsor engines, 332,352,360,390,406,410,427,428 FEs, and 429,460 385 series big blocks. 5/8-18 x 2 inch long heat treated black oxide coated Grade 8 alloy steel with a thick parallel ground washer to provide accurate, uniform torque.
Product Features:
See More
Product Features:
- Heat treated black oxide coated Grade 8 alloy steel
- Thick parallel ground washer provides more accurate, uniform torque
- Hex Prevents Socket Slippage
- Accurate And Uniform Torque
- Black Plated Finish
Competition Cams – Xtreme Energy 218/224 Hydraulic Roller Cam (Part No.34-422-9)
from
$531.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,
Product Features:
See More
Product Features:
- Excellent performance in street carbureted applications.
- More vacuum allows an increase in duration for improved performance and assists power brakes.
- Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
- Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
Mr. Gasket – Valve Cover (Part No.9413)
from
$101.99
These Mr. Gasket chrome plated stamped steel valve covers have a flat smooth top, and internal baffles. 7-bolt design. Sold as a pair.
Product Features:
See More
Product Features:
- Chrome plated steel construction
- Sold as a pair
- Fits Ford big block (385 series)
- Long Lasting Durability
- Cadmium Plated To Resist Corrosion
- Easy Installation
Weiand – High-Rise Dual Plane Intake Manifold for Maximum Torque (Part No.8012)
from
$399.99Product Features:
- High Rise/Dual Plane Design For Maximum Torque
- Fully CNC Machined For A Perfect Fit
- Square Bore Carburetor Flange
- Exhaust Crossover For Improved Street Drivability
- Permanent Mold Casting Process
- Lighter/Smoother/Better Looking
- More Consistent Castings
Motive Gear – Performance Differential Ring and Pinion (Part No.F890300)
MSD Ignition – Distributor Gear; Steel; Ford 351C; 460 (Part No.85813)
from
$158.99
A distributor’s performance is only as good as its drive gear. MSD ignition has put a great deal of effort into researching and testing a variety of metallurgical compositions, heat treating and coatings to provide you with a durable, accurate and strong distributor gear. The result is a special iron alloy gear that is treated to a low-friction coating process. To you this means long life, an easy break-in period and reliable performance. Features micro polished surface for smooth contact. Proprietary formulated ductile iron. Melonite QPQ coated reduces friction and initial wear. Interstitial carbide concentration improves wear resistance and running properties.
Product Features:
See More
Product Features:
- Increased outer hardened layer thickness (RC 55-60)
- Micro Polished Surface For Smooth Contact
- Proprietary formulated ductile iron.
- Melonite QPQ coated reduces friction and initial wear
- Interstitial carbide improves wear resistance/running properties
Mr. Gasket – High Performance Thermostat (Part No.4365)
from
$32.49
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens At 195 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1619)
from
$30.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
- Not intended for use in emission controlled vehicles.
Hays – Flexplt: Bb Ford 70-97 (164T) (Part No.12-055)
from
$212.99
Flexplt: Bb Ford 70-97 (164T)
Edelbrock – Performer Series Retainer (Qty 16) (Part No.9724)
from
$106.99
Product Features:
See More
- Use W/ Valve Springs Part #5822, 5882, 5896, 5872, 5867, 5812, 5857
- Set of 16
- 1.50 in. Outside Diameter
- Steel Material
- Black Oxide Finish
Mallory – Unilite Ignition Module (Part No.605)
from
$95.99
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
Competition Cams – Xtreme Energy 218/224 Hydraulic Roller Cam and Lifter Kit (Part No.CL34-422-9)
from
$1245.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts.
Product Features:
See More
Product Features:
- Excellent performance in street carbureted applications.
- More vacuum allows an increase in duration for improved performance and assists power brakes.
- Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
- Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$204.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
Motive Gear – Differential Mini Spool (Part No.MS9-31)
Mr. Gasket – Water Neck (Part No.2664)
from
$35.99
Precision die-cast, these water necks are first polished to a high luster, then chrome plated. Comes with gasket and mounting bolts.
Product Features:
See More
Product Features:
- Complete with gasket and mounting bolts
- Chrome plated
FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1812)
from
$27.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
- With steel core to provide ultimate excellent blowout resistance.
- Not intended for use in emission controlled vehicles.
Accel – Contact Set Hp 32 Oz (Part No.110228)
from
$53.99
Heavy duty points sets are quipped with extra think contack arms to prevent flexing at high RPMS. Large radiused tungsten contants provide crisp circuit breaking for peak coil output. High strength phenolic rubbing blocks provide superior durability when used with heavy duty spring tension.
Product Features:
See More
Product Features:
- Extra Thick Contact Arms
- Large Radius Tungsten Contacts
- High Strength Phenolic Rubbing Blocks
- Prevents Points Float
- Moisture-Proof Buna-N Condenser
Edelbrock – Engine Gasket Set (Head / Intake / Exhaust / Valve Cover) for Ford (Part No.7365)
from
$119.99
Product Features:
See More
- Head: 4.500″ Bore/0.048″ Thick/12.5cc Vol.
- Intake: 1.98″x2.26″ Port/.060″ Thick
- Exhaust: 1.50″x2.10″ Port
- 5/16″ Valve Cover
- Multi Piece Configuration
Mr. Gasket – Ultra Seal: Intake Gasket (Part No.5838)
from
$51.99
Ultra-Seal intake manifold gaskets are manufactured from cellulose/nitrile composition gasket material. Provides excellent sealing and durability. Incorporates Silicone beading around each intake and water outlet port to provide additional sealing strength on both sides of each gasket. No gasket sealer required. For OE replacement, high performance street, drag race and oval track use. Includes manifold end seals.
Product Features:
See More
Product Features:
- Manufactured from cellulose/nitrile composition gasket material
- Provides excellent sealing and durability
- Silicone beading on both sides of each gasket
- Complete with manifold end seals
- For OE replacement, high performance street, drag race and oval track use
- Creates Tight Leak proof Seal
B & M – Holeshot 2400 (Part No.40412)
from
$849.99
Holeshot 2400 for Ford 1966-1991 C6 with 332, 352, 360, 390, 406, 427, 428, 429 cid with 1.848 in. crank pilot (3) Application: Ford 1966 to 1991 C6 with 332, 352, 360, 390, 406, 427, 428, 429 cid with 1.848 crank pilot (3) Furnace brazed impeller New pre
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
B & M – Torque Converter, Holeshot 2400 (Part No.40422)
from
$637.99
A higher than stock stall speed as delivered by a B&M Converter will provide several advantages. The high stall converter allows the engine to launch the car at a higher RPM where more torque is available and increased strength. Due to torque converter co
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
Edelbrock – Exhaust Manifold Gasket Set for Ford (Part No.7228)
from
$29.99
Product Features:
See More
- Designed To Match Port Openings Of Cylinder Heads
- Excellent Free-Flowing Seal
Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5959)
from
$60.99
Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Manufactured from high-temperature steel core/graphite faced exhaust material
- Expanded steel core provides stability and maximum torque retention to eliminate gasket failure
- Graphite impregnated facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head
- Conforms to and seals minor surface irregularities
- Can be trimmed if necessary for modified port applications
- For OE replacement, high performance street, drag race and oval track use
- For use with SVO square port cylinder heads
- Easy Removal For Disassembly
FEL-PRO Performance – Performance Main Seal Set (Part No.2948)
from
$49.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions.
Product Features:
See More
Product Features:
- Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
- Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
- Not intended for use in emission controlled vehicles.
Mr. Gasket – Rear Main Seal Gasket (Part No.1965)
from
$51.99
This Mr. Gasket Rear Main Seal is made from silicone to allow the seal to handle extreme engine oil temperature. It also provides for an upgrade for that leaky rope style seal and is a direct replacement for a rubber main seal. It’s also injection molded for a precise fit.
Product Features:
See More
Product Features:
- Repairs That Leaky Rear Main Sail
- Silicone Rubber to Withstand Extreme Engine Oil Temperatures
- Upgrade for Rope Seal Equipped Cars or Direct Replacement for Rubber Main Seal
- Injection Molded for Precise Fit
Lincoln Mark III Performance and Racing Products Categories
Helping You Find the Right Performance and Racing Products for Your Lincoln Mark III
You love your Mark III. So we’ve made it easier than ever to help you find Lincoln Mark III Performance and Racing Products in our online catalog. Our inventory holds 124 aftermarket and OEM Performance and Racing Products for your Lincoln Mark III, ranging from $8.99 to $1,245.99.
We offer parts from 14 brands trusted to make quality Performance and Racing Products for your Lincoln Mark III. Before you buy, take some time to read through customer reviews. We currently have 1,004 reviews of Lincoln Mark III Performance and Racing Products from previous customers. Some of the top rated parts include Blaster 2 Coil: High Performance Ignition Upgrade with 4.3 stars and Automatic Shifter, Z-Gate with 4.4 stars.
Find your Mark III Performance and Racing Products here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Lincoln Mark III part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Performance and Racing Products Brands for Your Lincoln Mark III
Our inventory holds Performance and Racing Products for your Lincoln Mark III from 14 trusted brands. You’ll find OEM and aftermarket parts from brands like Holley, Mr. Gasket, and Edelbrock, all of which can keep that Lincoln happy.
We have Accel parts available for your Lincoln Mark III in categories like Performance Ignition Products. Some of the top-rated Accel parts in these categories are:
Top-Rated Holley Performance and Racing Products
Leading Holley Performance and Racing Products
We carry Holley brand parts for your Lincoln Mark III across several catalog categories, including Performance Fuel Systems. Some of our most reviewed Holley parts include:
from
$509.99
(45)
Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny
Performance Carburetors
from
$699.99
(6)
Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny
Performance Carburetors
FAQs for Lincoln Mark III Performance and Racing Products
What are the most purchased Performance and Racing Products for the Lincoln Mark III?
Out of 124 Performance and Racing Products for the Lincoln Mark III, the most popular in our inventory are:
from
$394.99
(10)
Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet
Performance Carburetors
from
$32.49
This product is not rated
High Performance Thermostat
Performance Engine Coolant Thermostats
from
$38.99
This product is not rated
Lower Intake Manifold Gasket Set: 5 Piece Set
Performance Engine Intake Manifold Gaskets
What are the top-rated Lincoln Mark III Performance and Racing Products?
Top-rated Performance and Racing Products for your Lincoln Mark III based on customer reviews/ratings are:
from
$95.99
(3)
Unilite Ignition Module
“I like the Unilite product because it is so small and compact compared to the HEI stuff I normally use. If you are restricted on space Its a great pro”
