Lincoln Mark II Belts and Hoses
Top Lincoln Mark II Belts and Hoses Categories
We carry over 18 Belts and Hoses in inventory for the Lincoln Mark II. If you’re looking for aftermarket Belts and Hoses for your Lincoln Mark II, check out all these categories:
Essential Lincoln Mark II Belts and Hoses
Gates – Straight Heater Hose: EPDM, Direct Fit, 0.625" Inside Diameter (sold by foot) (Part No.28411)
from
$1.99
Premium hose constructed for long service life.
Product Features:
See More
Product Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- CAUTION: Do not use for fuel or oil transfer applications
- PLEASE NOTE: Item is priced and sold by the foot. See store for details.
Gates – Green Stripe Heavy-Duty Vulco-Flex Coolant Hose (Part No.26509)
from
$37.99
Heavy-duty flexible hose designed to replace straight or curved coolant hoses. The benefit is maximum coverage with minimum inventory. Hose inside diameter remains constant from end to end. No convolutions inside hose so tube is smooth, allowing free coolant flow. Approved for marine applications.
Product Features:
See More
Product Features:
- Designed to resist electrochemical degradation, the leading cause of pipe failure
- The steel wire spiral allows them to take on multiple shapes without bending or crushing
- EPDM tubing and neoprene lid for extended life
- The polyester fabric reinforcement takes the form of vulcanization without unnecessary stress on the connections.
- Heat, oil, and ozone resistant
- Meets SAE 20R5 Type EC Class D-2 specifications
- Temperature range -40 degrees F to +257 degrees F (-40 degrees C to +125 degrees C)
- Caution: Do not use for fuel or oil transportation applications.
- Caution: Do not use for fuel or oil transfer applications.
Dayco – Flex Radiator Hoses; EPDM Rubber, 13.25 Inch Long, 1.75 Inch Inner Dia. (Part No.81321)
from
$18.29
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.
Product Features:
See More
Product Features:
- Designed to meet OE specifications
- Not suitable for oil or heat transfer
- Meets SAE J20R4, Class D-2 requirements for improved service hoses
- This hose is designed to prevent splitting, ballooning, and elongation
Gates – Premium Molded Coolant Hose (Part No.20557)
from
$35.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Materials specially designed to resist collapse in a vacuum
- Designed to withstand electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube; synthetic fiber knit reinforcement; heat, ozone- and chemical coolant-resistant EPDM cover
- Meets the requirements of SAE 20R4, Class D2 and DIN 73411, Class A (except for tolerances)
- Temperature range -40 degrees F to +257 degrees F (-40 degrees C to +125 degrees C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Warning: Do not use for fuel or oil transfer applications
Gates – Green Stripe Heavy-Duty Vulco-Flex Coolant Hose (Part No.26603)
from
$22.49
Heavy-duty flexible hose designed to replace straight or curved coolant hoses. The benefit is maximum coverage with minimum inventory. Hose inside diameter remains constant from end to end. No convolutions inside hose so tube is smooth, allowing free coolant flow. Approved for marine applications.
Product Features:
See More
Product Features:
- Designed to resist electrochemical degradation, the leading cause of pipe failure
- The steel wire spiral allows them to take on multiple shapes without bending or crushing
- EPDM tubing and neoprene lid for extended life
- Polyester fabric reinforcement vulcanizes without unnecessary deformation in connections
- Heat, oil and ozone resistant
- Performs to SAE 20R5 Type EC Class D-2 specifications
- Temperature range -40 degrees F to +257 degrees F (-40 degrees C to +125 degrees C)
- Warning: Do not use for fuel or oil transfer applications
- Caution: Do not use for fuel or oil transfer applications.
Gates – Automotive XL High Capacity V-Belt (Part No.9463)
from
$29.99
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.
Product Features:
See More
Product Features:
- The fiber-filled rubber adds flexibility along the entire length of the belt and provides greater lateral stability in the pulley.
- Ground to ensure precise dimensional control of the top width and sidewall for proper adjustment to the pulley.
- Thermally active pull cords for maintenance-free operation when the strap is properly installed and tensioned
- Resistant to oil, heat, ozone, weathering, and aging for better belt life.
- Meets or exceeds SAE J636C specifications
Dayco – Bottom Cog V-Belt; 46.25 Inch Long, Exact Fit Premium Quality (Part No.17463)
from
$21.49
Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.
Product Features:
See More
Product Features:
- Designed for efficient power transmission to vehicle accessories in today’s trucks and buses.
- áDesigned for efficient power transmission to vehicle accessories in today’s trucks and buses.
- Provides greater durability and flexibility 35% stronger than all previous versions
- Features specially treated cords for added strength, stability and reliability
- Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds
Gates – Automotive XL High Capacity V-Belt (Part No.9405)
from
$34.99
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.
Product Features:
See More
Product Features:
- The fiber-filled rubber adds flexibility along the entire length of the belt and provides greater lateral stability in the pulley.
- The shape is ground to ensure precise dimensional control of the top width and sidewall for a correct fit to the pulley.
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather, and decay to improve belt life
- Meets or exceeds SAE J636C specifications
Driveworks – Automotive V-Belt, Driveworks (Part No.46317)
from
$4.29
The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.
Product Features:
See More
Product Features:
- Made with a fabric reinforced base material; this v-belt has the strength and stability required for long term performance on all v-belt drives
- Polyester cords provide extreme tension-holding capability for longer belt life
- The raw edge belt design delivers the maximum gripping power
- The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration
Driveworks – Automotive V-Belt, Driveworks (Part No.37517)
from
$4.99
The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.
Product Features:
See More
Product Features:
- This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
- Polyester cords provide extreme tension-holding capability for longer belt life
- The raw edge belt design delivers the maximum gripping power
- The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration
Dayco – Straight Heater Hose; EPDM Rubber, 5/8 Inch Diameter (sold by foot) (Part No.80271)
from
$1.99
Specifically designed to carry the heated coolant from the engine block to the heater core under the dashboard and return it to the engine, this Dayco Standard Heater Hose is constructed using all EPDM compounds and spiral reinforcement for high burst strength and excellent heat resistance. Made for general service on light trucks and passenger cars, this hose is similar to SAE 20R3, Class D-2 and has a temperature rating of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). This Dayco Standard Heater Hose is compatible with all common coolant and coolant additives. Note: This hose is NOT suitable for fuel or oil transfer.
Product Features:
See More
Product Features:
- Specifically designed to be compatible with all common coolants and coolant additives
- Constructed using all EPDM compounds and spiral reinforcements
- Similar to SAE 20R3, Class D-2
- Has a high burst strength and excellent heat resistance of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
- PLEASE NOTE: Item is sold and priced by the foot. See store for details.
Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)
from
$59.99
Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.
Product Features:
See More
Product Features:
- Metal line kit
- For use in engine oil cooler applications
- Routes oil lines past exhaust manifolds
- Provides protection where standard hoses can fail
Imperial – 1/2" x 12′ Engine Oil Cooler Hose (Part No.240112)
from
$48.99
1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.
Product Features:
See More
Product Features:
- Engine oil cooler hose
- Size: 1/2″ x 12′
- Designed for engine oil applications
- 12′ hose length accommodates most applications
Gates – Premium Molded Coolant Hose (Part No.20046)
from
$34.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Materials specially designed to resist collapse in a vacuum
- Designed to resist electrochemical degradation, which is the leading cause of hose failure
- Pre-shaped to fit and ensure a perfect seal
- EPDM tube; synthetic fiber knit reinforcement; heat, ozone- and chemical coolant-resistant EPDM cover
- Meets the requirements of SAE 20R4, Class D2 and DIN 73411, Class A (except for tolerances)
- Temperature range -40 degrees F to +257 degrees F (-40 degrees C to +125 degrees C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Warning: Do not use for fuel or oil transfer applications
Dayco – Flex Radiator Hoses; EPDM Rubber, 14.13 Inch Long, 2 Inch Inner Dia. (Part No.81421)
from
$12.99
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.
Product Features:
See More
Product Features:
- Designed to meet OE specifications
- Not suitable for oil or heat transfer
- Meets SAE J20R4, Class D-2 requirements for improved service hoses
- This hose is designed to prevent splitting, ballooning, and elongation
Lincoln Mark II Belts and Hoses Categories
Helping You Find the Right Belts and Hoses for Your Lincoln Mark II
You love your Mark II. So we’ve made it easier than ever to help you find Lincoln Mark II Belts and Hoses in our online catalog. Our inventory holds 18 aftermarket and OEM Belts and Hoses for your Lincoln Mark II, ranging from $1.99 to $59.99.
We offer parts from 4 brands trusted to make quality Belts and Hoses for your Lincoln Mark II. Before you buy, take some time to read through customer reviews. We currently have 2 reviews of Lincoln Mark II Belts and Hoses from previous customers.
Find your Mark II Belts and Hoses here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Lincoln Mark II part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Belts and Hoses Brands for Your Lincoln Mark II
Our inventory holds Belts and Hoses for your Lincoln Mark II from 4 trusted brands. You’ll find OEM and aftermarket parts from brands like Dayco, Imperial, and Gates, all of which can keep that Lincoln happy.
We have Driveworks parts available for your Lincoln Mark II in categories like Serpentine and V Belts. Some of the top-rated Driveworks parts in these categories are:
FAQs for Lincoln Mark II Belts and Hoses
What are the most purchased Belts and Hoses for the Lincoln Mark II?
Out of 18 Belts and Hoses for the Lincoln Mark II, the most popular in our inventory are:
from
$1.99
This product is not rated
Straight Heater Hose; EPDM Rubber, 5/8 Inch Diameter (sold by foot)
Heater Hoses
from
$18.29
This product is not rated
Flex Radiator Hoses; EPDM Rubber, 13.25 Inch Long, 1.75 Inch Inner Dia.
Lower Radiator Hoses
from
$21.49
This product is not rated
Bottom Cog V-Belt; 46.25 Inch Long, Exact Fit Premium Quality
V-Belts
