Lincoln Lincoln Parts

Please Select your Vehicle to See Exact Fit Parts

Lincoln Lincoln Air Intakes

Holley – Performance and Race Carburetor: 500 CFM, No Choke, 2 Barrel, 2300 Bore, Single Inlet (Part No.0-4412CT)

Performance and Race Carburetor: 500 CFM, No Choke, 2 Barrel, 2300 Bore, Single Inlet

from

$649.99
Competition fuel curves provide safe and reliable horsepower for high performance race engines.

Product Features:
  • Gold Dichromate Finish For Corrosion Resistance w/Classic Look
  • Man. Choke Cable Hand Controlled For Cold Start Control
  • 50CC Accelerator Pump For Add. Fuel Under Initial Acceleration
  • Power Valve Blow-Out Protection
  • 100% Wet-Flow Tested To Assure It Arrives Ready To Run
See More

Holley – Street Carburetor: 500 CFM, Electric Choke, 2 Barrel, 2300 Bore, Single Inlet, Shiny (Part No.0-80500)

Street Carburetor: 500 CFM, Electric Choke, 2 Barrel, 2300 Bore, Single Inlet, Shiny

from

$614.99
Street Avenger carburetors are known to bolt on right out of the box and Holley is excited to announce the addition of our new 2bbl Street Avenger models available in 350 and 500 CFM. Street Avenger carburetors have great features such as optimized street calibrations; three vacuum ports for all necessary vacuum accessories; factory preset electric choke for easy startups; built-in fuel filters; and an included 3/8″ fuel line connection so there are no unnecessary trips back to the parts store.

Product Features:
  • Vibratory Polished For Good Looks
  • Optimized Street Calibration That Works Out Of The Box
  • Factory Preset Electric Choke For Easy Startups
  • Built In No Trouble Fuel Inlet Filter
  • Provides Precise Fuel Control For Low End Torque/Acceleration
  • Gen Iv No Trouble Power Valve
  • Three Vacuum Ports [1 Pcv/Brake 1 Timed Spark 1 Full]
  • Limited Lifetime Warranty Defects In Material/Workmanship
  • 100% Wet Flow Tested By Holley Technicians
  • Arrives Ready To Run
See More

Holley – Performance and Race Carburetor: 500 CFM, No Choke, 2 Barrel, 2300 Bore, Dual Inlet, Shiny (Part No.0-4412BKX)

Performance and Race Carburetor: 500 CFM, No Choke, 2 Barrel, 2300 Bore, Dual Inlet, Shiny

from

$819.99
Xtreme Performance – Holley Ultra XP(TM) Circle Track Carburetors! Ultra XP carbs are 38% lighter than our original HP, have fuel capacity that is 20% greater and 30 other new features! They’re available in our Hard Core Gray(TM) hard coat anodized finish with Black(TM) billet for improved corrosion protection & also available in natural tumble-polished aluminum with Black(TM) metering blocks and base plate. The Aluminum Ultra XP Cirlce Tracks are available in 650 & 750 CFM’s. Holley Ultra XP carburetors are Specifically Calibrated for Circle Track & offer new features such as anti-siphon valve in the main body; high capacity HP bowls which feature 20% more fuel capacity to eliminate starvation, integrated fuel shelf to minimize fuel aeration and internal baffling to control fuel slosh. Other features include all aluminum construction, fully tunable billet metering blocks, billet base plate, wedge floats, adjustable secondary linkage and knurled (hand adjustable) curb idle screws. Holley Ultra XP carburetors are the ultimate in square bore race carburetors!

Product Features:
  • All Aluminum Construction
  • No Choke Tower For Unobstructed Airflow
  • Air Bleeds Moved Outward Allow Smoother Transition Of Airflow
  • Down-Leg Boosters For Improved Fuel Signal
  • Contoured Hex Head Squirter Screw For Streamlined Airflow
  • Internal Pump Passage On Metering Block w/Tunable Bleed Off
  • Built In Drain Plug Provides Easy Access to Empty Bowl
  • Fuel Bowl Provides 20% More Fuel Capacity Controls Slosh
  • Clear Sight Window On Both Sides Of Bowl For Fuel Level Adjust
See More

Holley – Street Carburetor: 500 CFM, Manual Choke, 2 Barrel, 2300 Bore, Single Inlet, Shiny (Part No.0-4412S)

Street Carburetor: 500 CFM, Manual Choke, 2 Barrel, 2300 Bore, Single Inlet, Shiny

from

$549.99
The 0-4412 is designed as a stock replacement for 2BBL street applications as well as being mandated for some oval track racing sanctioning bodies. Whether you are looking for a replacement carburetor to replace your tired and worn factory 2BBL or one to push you to the finish line on Saturday night, the Holley 0-4412 Performance 2BBL is the perfect choice.

Product Features:
  • Vibratory Polished For Good Looks
  • Man. Choke Cable Hand Controlled For Cold Start Control
  • 50CC Accelerator Pump For Add. Fuel Under Initial Acceleration
  • Power Valve Blow-Out Protection
  • 100% Wet-Flow Tested To Assure It Arrives Ready To Run
See More

Holley – Performance and Race Carburetor: 500 CFM, No Choke, 2 Barrel, 2300 Bore, Single Inlet (Part No.0-4412HBX)

Performance and Race Carburetor: 500 CFM, No Choke, 2 Barrel, 2300 Bore, Single Inlet

from

$921.99
Xtreme Performance – Holley Ultra XP(TM) Circle Track Carburetors! Ultra XP carbs are 38% lighter than our original HP, have fuel capacity that is 20% greater and 30 other new features! They’re available in our Hard Core Gray(TM) hard coat anodized finish with Black(TM) billet for improved corrosion protection & also available in natural tumble-polished aluminum with Black(TM) metering blocks and base plate. The Aluminum Ultra XP Cirlce Tracks are available in 650 & 750 CFM’s. Holley Ultra XP carburetors are Specifically Calibrated for Circle Track & offer new features such as anti-siphon valve in the main body; high capacity HP bowls which feature 20% more fuel capacity to eliminate starvation, integrated fuel shelf to minimize fuel aeration and internal baffling to control fuel slosh. Other features include all aluminum construction, fully tunable billet metering blocks, billet base plate, wedge floats, adjustable secondary linkage and knurled (hand adjustable) curb idle screws. Holley Ultra XP carburetors are the ultimate in square bore race carburetors!

Product Features:
  • All Aluminum Construction
  • No Choke Tower For Unobstructed Airflow
  • Air Bleeds Moved Outward Allow Smoother Transition Of Airflow
  • Down-Leg Boosters For Improved Fuel Signal
  • Contoured Hex Head Squirter Screw For Streamlined Airflow
  • Internal Pump Passage On Metering Block w/Tunable Bleed Off
  • Built In Drain Plug Provides Easy Access to Empty Bowl
  • Fuel Bowl Provides 20% More Fuel Capacity Controls Slosh
  • Clear Sight Window On Both Sides Of Bowl For Fuel Level Adjust
See More

Holley – Street Carburetor: 500 CFM, Manual Choke, 2 Barrel, 2300 Bore, Single Inlet, Gold Dichromate (Part No.0-4412C)

Street Carburetor: 500 CFM, Manual Choke, 2 Barrel, 2300 Bore, Single Inlet, Gold Dichromate

from

$665.99
The 0-4412 is designed as a stock replacement for 2BBL street applications as well as being mandated for some oval track racing sanctioning bodies. Whether you are looking for a replacement carburetor to replace your tired and worn factory 2BBL or one to

Product Features:
  • Gold Dichromate Finish For Corrosion Resistance w/Classic Look
  • Man. Choke Cable Hand Controlled For Cold Start Control
  • 50CC Accelerator Pump For Add. Fuel Under Initial Acceleration
  • Power Valve Blow-Out Protection
  • 100% Wet-Flow Tested To Assure It Arrives Ready To Run
  • Does Not Work w/A.O.D. Transmissions
  • Installation/Tuning DVD Incl.
See More

Lincoln Lincoln Transmission Parts

Imperial – Maxi-Kool XL Transmission Oil Cooler (Part No.243012)

Maxi-Kool XL Transmission Oil Cooler

from

$85.99
The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:
  • Class “A” motor homes, large travel trailers, 5th-wheel trailers
  • GVWR up to 30,000 lbs.; towing up to 10,000 lbs.
  • Compatible with OEM cooler systems
  • 33% more efficient than a comparable tube and fin design
See More

Imperial – High Performance Transmission Oil Cooler (Part No.240512)

High Performance Transmission Oil Cooler

from

$60.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:
  • Imperial high-performance transmission cooler
  • Size: 3/4″ x 7-1/2″ x 12-1/2″
  • SAE 45-degree fittings for maximum reliability
  • Electrostatic powder-coated to prevent corrosion
  • SAE 45 degree fittings for maximum reliability
  • Electrostatically powder coated to prevent corrosion
  • All aluminum lightweight construction
  • SAE 45 degree fittings for maximum reliability
  • Electrostatically powder coated to prevent corrosion
  • All aluminum lightweight construction
See More

Imperial – Maxi-Kool XL Transmission Oil Cooler (Part No.243007)

Maxi-Kool XL Transmission Oil Cooler

from

$73.99
The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:
  • Imperial Maxi-Cool plate and fin transmission cooler
  • Size: 3/4″ x 11″ x 7-1/2″
  • Mid-size and full-size cars, pickups
  • GVWR up to 20,000 lbs.; towing up to 2,500 lbs.
  • Compatible with OEM cooler systems
  • Made with the highest quality materials
  • 100% pressure testing to 150 PSI for quality assurance
  • 33% more efficient than a comparable tube and fin design
See More

National – Multi-Purpose Seal (Part No.470059)

Multi-Purpose Seal

from

$9.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Design type: spring loaded; multi-lip
  • Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
  • Good low temperature capability
  • Low swell in hydrocarbon fluids
  • Delivers quality and reliable performance for every type of repair
See More

Felpro – Manual Transmission Gasket Set (Part No.TS 2973 B)

Manual Transmission Gasket Set

from

$21.99
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Includes all parts needed to complete the repair
See More

Imperial – Mounting Kit System (Part No.226201)

Mounting Kit System

from

$11.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:
  • Imperial mounting kit system
  • For installation of transmission coolers and electric fans
  • Provides quick, effective installation of Imperial products
  • Contains nylon mounting rods, foam pads and locking buttons
  • Aftermarket electric fan and cooler mounting rods
  • Made with the highest quality materials
  • Quality machined for durability
  • Removable buttons for relocation
  • Aftermarket electric fan and cooler mounting rods
  • Made with the highest quality materials
  • Quality machined for durability
  • Removable buttons for relocation
See More

National – Tapered Roller Bearing Cone (Part No.25590)

Tapered Roller Bearing Cone

from

$27.99
Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.

Product Features:
  • PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
  • SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
  • OE-STYLE DESIGN – Engineered to meet OE specifications
  • COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
  • RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
See More

National – Multi-Purpose Seal (Part No.7038SA)

Multi-Purpose Seal

from

$16.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Design type: spring loaded; multi-lip
  • Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
  • Good low temperature capability
  • Low swell in hydrocarbon fluids
  • Delivers quality and reliable performance for every type of repair
See More

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

Transmission Oil Cooler Reinstallation Kit

from

$25.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:
  • Transmission cooler reinstallation kit
  • Contains part numbers 248001, 226201, 240250 and 4 hose clamps
  • Provides all hardware for reinstallation of Imperial transmission coolers
  • Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
  • Made of high grade nylon for easy installation
  • Removable buttons for cooler/fan relocation
  • Made for both transmission coolers and electric fan installation
  • Comes with Quick Connect coupler
See More

Driveworks – Oil Seal (Part No.S-5778)

Oil Seal

from

$13.99
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

National – Multi-Purpose Seal (Part No.51098)

Multi-Purpose Seal

from

$10.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Design type: spring loaded; single-lip
  • Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
  • Good low temperature capability
  • Low swell in hydrocarbon fluids
  • Delivers quality and reliable performance for every type of repair
See More

Lincoln Lincoln Belts and Hoses

Dayco – Bottom Cog V-Belt; 56 Inch Long, Exact Fit Premium Quality (Part No.15560)

Bottom Cog V-Belt; 56 Inch Long, Exact Fit Premium Quality

from

$23.99
Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.

Product Features:
  •  Provides greater durability and flexibility – 35% stronger than all previous versions
  • Prevents electromechanical interference issues on modern vehicles
  •  Resists heat, oil and grease
See More

Driveworks – Automotive V-Belt, Driveworks (Part No.56015)

Automotive V-Belt, Driveworks

from

$5.29
The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:
  • This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
  • Polyester cords provide extreme tension-holding capability for longer belt life
  • The raw edge belt design delivers the maximum gripping power
  • The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration
See More

Imperial – Transmission Oil Cooler Hose (Part No.248001)

Transmission Oil Cooler Hose

from

$32.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:
  • Transmission oil cooler hose
  • 11/32″ x 4-1/2′
  • Designed for transmission fluid applications
  • Made for tight-radius applications found in transmission cooler installations
  • Compatible with 11/32 in. OEM cooler systems
  • Tube made of black chemigum (nitrile)
  • Reinforced with 2-spiral synthetic
  • Covered in black Hypalon
  • Compatible with 11/32 in. OEM cooler systems
  • Tube made of black chemigum (nitrile)
  • Reinforced with 2-spiral synthetic
  • Covered in black Hypalon
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12" Long, 1.50" Diameter (Part No.B70081)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12" Long, 1.50" Diameter

from

$24.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Gates – Vulco Straight Coolant Hose (Sold by inch) (Part No.24028)

Vulco Straight Coolant Hose (Sold by inch)

from

$1.99
Specially engineered stick hose is ideal for straight coolant/air connections in automotive, stationary engine, industrial and home applications.

Product Features:
  • Heat-resistant cover
  • Cover marked in 1-inch increments to facilitate approximate cut lengths, allows for “custom” installations.
  • Meets the requirements of SAE 20R1 standard for Class D-2 walls
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: For a maintenance-free connection, use PowerGrip SB clamps
  • Caution: Do not use for fuel or oil transfer applications
See More

Gates – Premium Molded Coolant Hose (Part No.20065)

Premium Molded Coolant Hose

from

$21.49
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • The specially designed materials resist collapse under vacuum.
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and ensure a perfect seal
  • EPDM tube; synthetic fiber knit reinforcement; EPDM cover resistant to heat, ozone, and chemical refrigerants
  • Compliant with the requirements of SAE 20R4, class D2 and DIN 73411, class A standards (except with regard to tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing clamps and connectors every time a new cooling hose is installed.
  • Caution: Do not use for fuel or oil transfer applications
See More

Dayco – Flex Radiator Hoses; EPDM Rubber, 12.25 Inch Long, 2 Inch Inner Dia. (Part No.81411)

Flex Radiator Hoses; EPDM Rubber, 12.25 Inch Long, 2 Inch Inner Dia.

from

$24.99
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.

Product Features:
  • Designed to meet OE specifications
  • Not suitable for oil or heat transfer
  • Meets SAE J20R4, Class D-2 requirements for improved service hoses
  • This hose is designed to prevent splitting, ballooning, and elongation
See More

Dayco – Flex Radiator Hoses; EPDM Rubber, 6.13 Inch Long, 1.75 Inch Inner Dia. (Part No.81281)

Flex Radiator Hoses; EPDM Rubber, 6.13 Inch Long, 1.75 Inch Inner Dia.

from

$9.99
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.

Product Features:
  • Designed to meet OE specifications
  • Not suitable for oil or heat transfer
  • Meets SAE J20R4, Class D-2 requirements for improved service hoses
  • This hose is designed to prevent splitting, ballooning, and elongation
See More

Imperial – Metal Line Kit for Engine Oil Cooler (Part No.240293)

Metal Line Kit for Engine Oil Cooler

from

$59.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:
  • Metal line kit
  • For use in engine oil cooler applications
  • Routes oil lines past exhaust manifolds
  • Provides protection where standard hoses can fail
  • Used on Chevrolet V8 applications
  • Routes oil lines past exhaust manifolds
  • Provides protection where standard hoses can fail
  • Comes with all parts needed for the job
See More

Imperial – Engine Oil Cooler Hose (Part No.240112)

Engine Oil Cooler Hose

from

$48.99
1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.

Product Features:
  • Engine oil cooler hose
  • Size: 1/2″ x 12′
  • Designed for engine oil applications
  • 12′ hose length accommodates most applications
  • Size: 1/2 in. x 12′
  • Designed for engine oil applications
  • 12′ hose length accommodates most applications
  • Medium duty applications
See More

Search Over 116 Lincoln Lincoln Parts Online for Delivery or Pick Up

Looking for the best Lincoln Lincoln aftermarket replacement parts? Replacing worn and broken parts on your Lincoln Lincoln? Check out our online catalog to find the best selection of aftermarket Lincoln Lincoln parts as well as real user reviews on Lincoln Lincoln replacement parts. Make an informed decision about every component you add to your Lincoln.

At Advance Auto, we’ve got you covered when it comes to getting your Lincoln Lincoln in tip top condition. We’ve got over 116 Lincoln Lincoln parts to choose from in popular categories like Air Intakes, Transmission Parts and Clutch Systems. If you’re looking for the best prices, try searching our Lincoln Lincoln parts catalog to compare OEM and aftermarket parts for your Lincoln Lincoln.

Whether you need Lincoln Lincoln body parts, interior components, or custom Lincoln Lincoln parts you can find them online at Advance Auto. Want to order your Engine Parts online? Or maybe you need your Lincoln Belts and Hoses same day? No problem, you can pick up Lincoln parts in person at locations across the country, or have them delivered to straight to your door after ordering online. Finding a great deal on new and used Lincoln Lincoln parts has never been easier.