Lexus SC400 Ignition and Tune-Up Products

Essential Lexus SC400 Ignition and Tune-Up Products

Delphi – Ignition Coil (Part No.GN10501)

Ignition Coil

from

$121.99
Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.

Product Features:
  • Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
  • Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
  • Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
  • We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues
See More

Autolite – Racing Resistor Spark Plug: Enables Performance, Handles Intense Conditions (Part No.AR3923)

Racing Resistor Spark Plug: Enables Performance, Handles Intense Conditions

from

$4.99
The ground electrode is cut-back from the center electrode to provide a gap. The face of the ground electrode is concave to provide a constant gap to the center electrode. This plug is designed use in all aftermarket cylinder heads used in different types of racing venues including oval and road racing.

Product Features:
  • Opens spark face for better ignitability of flame kernel
  • Retains less heat, transfers heat to shell faster – reduces risk of pre-ignition
  • Dyno testing has shown proven power gains
  • Cut-back ground electrode evolved from practice of grinding back the side electrode
See More

PerTronix – 808415 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 115 Degree Red (Part No.808415)

808415 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 115 Degree Red

from

$81.99
8mm Custom fit MAGx2 wires are available for many popular applications equipped with Flame-Thrower or original GM HEI distributors. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cuttting, crimping and

Product Features:
  • PerTronix 808415 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 115 Degree Red
  • Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
See More

Dorman – Help – Spark Plug Non-Foulers – 14mm Gasket Seat Long Reach (Part No.42004)

Spark Plug Non-Foulers - 14mm Gasket Seat Long Reach

from

$9.99
This spark plug non fouler is designed for easy installation on specified vehicles to protect spark plugs from fouling and damage. It is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this spark plug non fouler is designed for easy installation to protect spark plugs from fouling and damage on specified vehicles
  • Ideal solution – this non-fouler preserves spark plug life and is a reliable replacement for an original non-fouler that has failed due to corrosion
  • Durable construction – made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

YEC – YEC Distributor Cap (Part No.F201034269YEC)

YEC Distributor Cap

from

$34.95
YEC Distributor Caps and Rotors are made from top quality materials throughout to ensure high performance and long product life.

Product Features:
  • Superior Surface Finish
  • RFI Suppression
  • Precision-machined Contacts
  • Finely -tooled Metal Mounting Sleeve
See More

Carquest Premium – Distributor Cap and Rotor Kit (Part No.CAE1872)

Distributor Cap and Rotor Kit

from

$32.99
Distributor Cap and Rotor Kit

NGK – Spark Plug Wire Set (Part No.6403)

Spark Plug Wire Set

from

$253.99
NGK variable pitch resistor cables provide uniform resistance and ensure outstanding electrical conductivity in high-quality cables. Outer EPDM/silicone jacket and inner insulation contain high voltage currents for excellent dielectric strength. NGK varia

Product Features:
  • PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
  • BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
  • STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
  • PREMIUM ALLOY WINDING: Variable pitch winding over Ferrite magnetic alloy coating delivers ultra low resistance and excellent interference protection
  • CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
See More

NGK – Coil on Plug Boot (Part No.59008)

Coil on Plug Boot

from

$9.29
NGK Coil on Plug Boots are built to stringent OEM tolerances, combining original equipment fit, design and outstanding durability. NGK Coil on Plug Boots are manufactured using only premium silicone and always include any required internal springs and ferrite resistors for superior performance and RFI noise suppression. Bridging the important link between ignition coil and spark plug, COP boots should always be replaced with NGK Coil on Plug Boots at the time as changing spark plugs to prevent ignition problems such as flashover.

Product Features:
  • PREMIUM GRADE SILICONE: Designed to withstand harsh environments
  • OEM MATCHED: Includes all required internal springs and ferrite resistors for superior performance and RFI noise suppression
See More

Idemitsu – Power Steering Fluid – 12 oz (Part No.30102-052A)

Power Steering Fluid - 12 oz

from

$6.29
IDEMITSU Premium PSF is specifically engineered to meet the demanding performance requirements of Honda and Acura power steering units. This advanced technology fluid is formulated with premium quality base oils and the latest additive technologies to provide outstanding protection and performance under the most servere environmental and driving conditions.IDEMITSU Premium PSF can also be used in most Asian Original Equipment Manufacturer (OEM) power steering units that do not utilize electronic power steering technology.

Product Features:
  • Unique friction technology provides efficient and noise-free operation
  • Advanced formulation technology provides outstanding protection to the entire power steering system while delivering smooth performance under the most severe operating conditions
  • Superior low temperature performance for easy flow and protection against cavitation and elimination of “squawking” and “squealing”
  • Excellent compatibility with seals, gaskets and internal components to reduce the potential for leaks and ensures smooth performance over extended intervals
  • Robust anti-wear and inhibitor chemistry provides enhanced component and fluid durability and long-life
See More

Carquest – Ignition Control Module (Part No.CBE606)

Ignition Control Module

from

$241.05
Intermotor® is a complete engine management import line that includes ignition and electrical relays, switches and sensors with a concentration on high technology categories such as computerized engine controls, fuel injection, and emission controls with coverage for every part number with an import nameplate. Intermotor® parts are unrivalled for quality, original fit, form, function, and coverage providing a genuine import part in every box. Intermotor® is the import leader by design.

Product Features:
  • Our control modules feature double wire bonds for better connections, greater dependability and longer life despite being subjected to intense vibration and the tough operating environment
  • Copper slug heat sinks provide better heat dissipation to prevent heat from damaging the module
  • Our ignition modules will respond to a weak signal from the crankshaft position sensor and begin energizing the coils immediately for better starts in cold weather
  • High-temperature polymer housing reducing moisture intrusion and minimizes vibration damage for extended life and improved reliability
  • Our ignition modules are durability tested for 500 thermal cycles ranging from -40C to +125C
  • With industry leading expertise in electronic ignition, when original equipment fails our products are designed to fix the inherent failure issues
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Carquest Premium – Ignition Module (Part No.CBE1056)

Ignition Module

from

$204.99
CARQUEST Ignition Modules are built by an ignition systems manufacturer with expertise in the entire vehicle spark system.

Product Features:
  • CARQUEST Ignition Modules creates and refines the timing of the engine using various sensors and readings throughout the spark system in order to create an efficiently running engine.
  • CARQUEST Ignition Modules use current and voltage limiting circuitry in order to prevent the ignition coil from over voltage/current. Over voltages can allow for coils to create excessive heat which can damage to the ignition module resulting in check eng
  • CARQUEST Ignition Modules are 100% individually tested for all product functionalities including over voltage, timing and dwell.
See More

Carquest – Distributor Rotor (Part No.D685)

Distributor Rotor

from

$9.05
The Intermotor brand has built its reputation by engineering and distributing a full line of genuine import parts – parts that are unrivaled for quality, original look, fit, form & function, as well as coverage.

Product Features:
  • Integrated A/D converter and digital signal processing with a dynamically adaptive switch point improves accuracy and operation
  • Advanced circuitry protects the system from stray electro-magnetic fields and power spikes
  • Custom magnetic circuit programming calibrates the sensor while performance testing for improved timing accuracy between the target wheel and sensor output
  • Capitalizing on decades of research and development, our distributor caps and rotors contain unmatched quality yielding superior performance
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Carquest Premium – Distributor Rotor (Part No.DAC1214)

Distributor Rotor

from

$11.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Nippon Reinz – Spark Plug tube Seal (Part No.A8027168107NRZ)

Spark Plug tube Seal

from

$4.49
Nippon Reinz Spark Plug tube Seal withstands high and low temperatures to provide a reliable seal with minimal tightening. Spark Plug tube Seals are increasingly produced with profiles and not flat; that is, the gasket surface is provided with beads or lips. Now, instead of the entire gasket surface, only the profile needs to be pressed, that is, the sealing bead or sealing lip, and just a slight amount of bolting force produces sufficient deformation and adaptation.

Product Features:
  • Stays cool at temperature up to 1800F
  • Designed to seal minor surface irregularities
  • No re-torque required
  • Teflon® coating optional
See More

Felpro – Spark Plug Tube Seal Set (Part No.ES 73110)

Spark Plug Tube Seal Set

from

$21.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Ishino – Stone Spark Plug Tube Seal (Part No.A802724573ISH)

Stone Spark Plug Tube Seal

from

$7.56
ISHINO STONE® – Corteco Ishino Corporation of Japan – has been manufacturing gaskets since 1932 and tier-1 OEM supplier to Toyota, Honda and other Japanese auto manufacturers.

Product Features:
  • Superb quality and precision manufacturing process to ensure overall sealing dependability
  • Static sealing solutions are guaranteed to supply strong sealing power to eliminate any leakage
  • Manufactured to exact OEM specifications
See More

DENSO – Coil On Plug Boots-8 (Part No.671-8179)

Coil On Plug Boots-8

from

$162.99
DENSO First Time Fit COP boot sets are identical in form fit color and performance to the factory-installed boots. Every part of each COP boot set construction meets or exceeds OE/OES standards.

Product Features:
  • OE design ensures a tight boot seal that protects against moisture intrusion
  • High temperature resistant material provides greater protection against thermal overload
  • Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the plug
  • Engineered to the specifications used by the original vehicle manufacturer for an exact fit
See More

Carquest Premium – Coil On Plug Insulator Boot: Spring included, Designed for direct fit (Part No.35-7090)

Coil On Plug Insulator Boot: Spring included, Designed for direct fit

from

$11.99
CARQUEST Premium coil on plug boots are engineered to restore ignition boot reliability and performance. We have OE design providing an exact direct fit for your application and the performance and durability meet or exceed OE requirements. It offers excellent heat resistance as well as maximum protection against spark loss. With durable silicone compound for resistance to high heat or abrasion.

Product Features:
  • Provides excellent heat resistance as well as maximum protection against spark loss.
  • Durable silicone compound for resistance to high heat or abrasion
  • Spring included with the coil boot
  • Design for direct compatibility
  • OE design provides an exact fit for your application
  • Multipack provides one time replace all COP for better deal
See More

DENSO – Spark Plug Wire Set: Aluminum Steel Core, 11 Wire Set (Part No.671-8143)

Spark Plug Wire Set: Aluminum Steel Core, 11 Wire Set

from

$128.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:
  • Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
  • Identical OE end caps are designed to “click” into place for easy installation and a secure fit
  • Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
See More

Carquest Premium – Spark Plug Wire Set: 11 Wires, Increased performance, Designed for direct fit (Part No.35-8014)

Spark Plug Wire Set: 11 Wires, Increased performance, Designed for direct fit

from

$121.99
Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBC3696)

Ignition Knock (Detonation) Sensor

from

$172.99
MotoRad Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All MotoRad Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
  • Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
  • Designed to meet or exceed all OEM specifications in fit, form & function
  • Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBC3766)

Ignition Knock (Detonation) Sensor

from

$137.99
MotoRad Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All MotoRad Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
  • Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
  • Designed to meet or exceed all OEM specifications in fit, form & function
  • Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

NTK – Ignition Knock (Detonation) Sensor (Part No.ID0166)

Ignition Knock (Detonation) Sensor

from

$177.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • Reinforced and extra-strength components are used to reduce chance of part failure and prevent corrosion and moisture penetration. Mounting threads match OE for easy, worry free installation.
  • NTK’s Ignition Knock Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper ignition timing. This advanced technology is used for durability, drivability and fuel economy.
  • The Ignition Knock (Detonation) Sensor monitors vibrations caused by engine knock, or detonation, to alter the ignition timing and prevent detonation.
See More

Helping You Find the Right Ignition and Tune-Up Products for Your Lexus SC400

You love your SC400. So we’ve made it easier than ever to help you find Lexus SC400 Ignition and Tune-Up Products in our online catalog. Our inventory holds 66 aftermarket and OEM Ignition and Tune-Up Products for your Lexus SC400, ranging from $1.99 to $395.99.

We offer parts from 21 brands trusted to make quality Ignition and Tune-Up Products for your Lexus SC400. Before you buy, take some time to read through customer reviews. We currently have 13,598 reviews of Lexus SC400 Ignition and Tune-Up Products from previous customers. Some of the top rated parts include Iridium IX Spark Plug: Single Iridium Fine Wire, BKR6EIX-11 with 4.8 stars and OE Series V-Power Nickel Spark Plug: V-Groove Tip Design, BKR6E-11 with 4.8 stars.

Find your SC400 Ignition and Tune-Up Products here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Lexus SC400 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Ignition and Tune-Up Products Brands for Your Lexus SC400

Our inventory holds Ignition and Tune-Up Products for your Lexus SC400 from 21 trusted brands. You’ll find OEM and aftermarket parts from brands like Autolite, DENSO, and NGK, all of which can keep that Lexus happy.
We have Carquest parts available for your Lexus SC400 in categories like Ignition Electronic Parts. Some of the top-rated Carquest parts in these categories are:
Ignition Control Module
from $241.05
(1)
Ignition Control Module
Ignition Module and Controls

Top-Rated DENSO Ignition and Tune-Up Products

Leading DENSO Ignition and Tune-Up Products

We carry DENSO brand parts for your Lexus SC400 across several catalog categories, including Spark Plugs. Some of our most reviewed DENSO parts include:

FAQs for Lexus SC400 Ignition and Tune-Up Products

What are the most purchased Ignition and Tune-Up Products for the Lexus SC400?

Out of 66 Ignition and Tune-Up Products for the Lexus SC400, the most popular in our inventory are:

What are the top-rated Lexus SC400 Ignition and Tune-Up Products?

Top-rated Ignition and Tune-Up Products for your Lexus SC400 based on customer reviews/ratings are:
Iridium IX Spark Plug: Single Iridium Fine Wire, BKR6EIX-11
from $11.99
(113)
Iridium IX Spark Plug: Single Iridium Fine Wire, BKR6EIX-11
“Great plugs, great price!”
OE Series V-Power Nickel Spark Plug: V-Groove Tip Design, BKR6E-11
from $4.99
(86)
OE Series V-Power Nickel Spark Plug: V-Groove Tip Design, BKR6E-11
“Came pre gapped out of the box.”