Lexus SC300 Oxygen Sensor

Oxygen Sensor for a Lexus SC300

Use the fitment form at the top of the page to select your exact year and engine type for your Lexus SC300.

• 

  DENSO - Oxygen Sensor 4 Wire, Direct Fit, Heated, Wire Length: 17.72 (Part No. 234-4630)

  Description

  DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO's exclusive aluminum oxide trap
  
  Product Features:

  • Specifically designed to meet the increasing demands of today's engines
  • 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
  • Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
  • Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle's fuel efficiency
  • Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

  5.0

  Read 3 review(s)

  Review snapshot ® by PowerReviews

  5.0

  5.0

  • 5

    5

    2020-06-24

    5

    5

    I would buy this again

    I would buy this again

    Submitted 2020-06-24

    By Bruce

    From Undisclosed

    Fit perfect works great

    Bottom Line NULL

    Fit perfect works great

    By Bruce from Undisclosed

    BOTTOM LINE NULL

  • 5

    5

    2018-02-28

    5

    5

    The best you can buy

    The best you can buy

    Submitted 2018-02-28

    By Pervis

    From undisclosed

    Exact fit

    Bottom Line NULL

    Exact fit

    By Pervis from undisclosed

    BOTTOM LINE NULL

  • 5

    5

    2016-11-14

    5

    5

    Works perfect

    Works perfect

    Submitted 2016-11-14

    By Gee cee

    From Reading pa

    Works great past my emissions test. But I was much shorter. I had to run it differently to make it connect.

    Bottom Line NULL

    Works great past my emissions test. But I was much shorter. I had to run it differently to make it connect.

    By Gee cee from Reading pa

    BOTTOM LINE NULL

  from $101.99

  View Product
• 

  Bosch - Oxygen Sensor (Part No. 15740)

  Description

  Bosch is the world's leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.
  
  Product Features:

  • Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
  • Includes Smart Link Connector, no soldering required
  • No special tools required for installation
  • Seared protection tube due to 100% functional quality test
  • Performance meets or exceeds OE specifications

  4.0

  Read 2 review(s)

  Review snapshot ® by PowerReviews

  4.0

  4.0

  • 3

    3

    2022-06-02

    3

    3

    assembly required

    assembly required

    Submitted 2022-06-02

    By lettemburn

    From chicago

    read the description. bought it. got it home and opened it and found out you to wire the connector. says you dont need and tools. wrong! you need wire strippers. have to wire it to the config of the old one. it isnt plug and play. i know bosch makes good stuff but this angered me off. it should tell you assembly required.

    Bottom Line NULL

    read the description. bought it. got it home and opened it and found out you to wire the connector. says you dont need and tools. wrong! you need wire strippers. have to wire it to the config of the old one. it isnt plug and play. i know bosch makes good stuff but this angered me off. it should tell you assembly required.

    By lettemburn from chicago

    BOTTOM LINE NULL

  • 5

    5

    2020-12-05

    5

    5

    Highly recommended

    Highly recommended

    Submitted 2020-12-05

    By Francis

    From Undisclosed

    Bosch makes great products and quality. Instructions were clear. I'm glad advance auto parts sells parts that fit my vehicle.

    Bottom Line NULL

    Bosch makes great products and quality. Instructions were clear. I'm glad advance auto parts sells parts that fit my vehicle.

    By Francis from Undisclosed

    BOTTOM LINE NULL

  from $66.99

  View Product
• 

  Bosch - Oxygen Sensor (Part No. 15739)

  Description

  Bosch is the world's leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.
  
  Product Features:

  • Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
  • Includes Smart Link Connector, no soldering required
  • No special tools required for installation
  • Seared protection tube due to 100% functional quality test
  • Performance meets or exceeds OE specifications

  3.5

  Read 3 review(s)

  Review snapshot ® by PowerReviews

  3.5

  3.5

  • 5

    5

    2017-10-03

    5

    5

    fine

    fine

    Submitted 2017-10-03

    By Gary

    From undisclosed

    fine so far

    Bottom Line NULL

    fine so far

    By Gary from undisclosed

    BOTTOM LINE NULL

  • 4

    4

    2014-06-12

    4

    4

    Nice part and worked great

    Nice part and worked great

    Submitted 2014-06-12

    By geo

    From Norristown, PA

    Worked greatwith little to no issues. If this is your first universal fit part, read the instruction 3 or 4 types before you cut any wires. Also cut wire length as indicated, the extra length will make it easier to put together.

    Bottom Line recommended

    Worked greatwith little to no issues. If this is your first universal fit part, read the instruction 3 or 4 types before you cut any wires. Also cut wire length as indicated, the extra length will make it easier to put together.

    By geo from Norristown, PA

    BOTTOM LINE recommended

  • 1

    1

    2014-03-16

    1

    1

    Not to impressed!

    Not to impressed!

    Submitted 2014-03-16

    By Damien

    From Greenville NC

    Incomplete

    Bottom Line not recommended

    Incomplete

    By Damien from Greenville NC

    BOTTOM LINE not recommended

  from $84.99

  View Product
• 

  DENSO - Oxygen Sensor 4 Wire, Universal, Heated, Wire Length: 11.77 (Part No. 234-4209)

  Description

  DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO's exclusive aluminum oxide trap
  
  Product Features:

  • Specifically designed to meet the increasing demands of today's engines
  • 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
  • Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
  • Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle's fuel efficiency
  • Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

  3.0

  Read 3 review(s)

  Review snapshot ® by PowerReviews

  3.0

  3.0

  • 2

    2

    2021-11-06

    2

    2

    Instructions

    Instructions

    Submitted 2021-11-06

    By Thelcpl87

    From Peoria Illinois

    I wish there were instructions on how to wire this to install on vehicles

    Bottom Line not recommended

    I wish there were instructions on how to wire this to install on vehicles

    By Thelcpl87 from Peoria Illinois

    BOTTOM LINE not recommended

  • 4

    4

    2021-08-31

    4

    4

    Spend the extra for a plug

    Spend the extra for a plug

    Submitted 2021-08-31

    By NotSoFast

    From NC

    Replaced my upstream sensor on a '99 Accord. THOUGHT it would be so simple I could borrow the socket and do it in the parking lot. While the VIDEO shows a sensor with a plug, this one has 4 bare wires and requires much more time, thought, and tools. And, on the issue of tools, the website specifically said that this socket was available for loan; the 2 people in the store looked at me blankly. I would have "purchased" the kit to return if that option had been given. I would have needed the deep well socket to avoid removing the head shield; thankfully the little rusted bolts came out. Wires for my setup were blue to white, green to white, and either black to black. Definitely make sure the included directions work for your setup before removing (and destroying) the old one.

    Bottom Line not recommended

    Replaced my upstream sensor on a '99 Accord. THOUGHT it would be so simple I could borrow the socket and do it in the parking lot. While the VIDEO shows a sensor with a plug, this one has 4 bare wires and requires much more time, thought, and tools. And, on the issue of tools, the website specifically said that this socket was available for loan; the 2 people in the store looked at me blankly. I would have "purchased" the kit to return if that option had been given. I would have needed the deep well socket to avoid removing the head shield; thankfully the little rusted bolts came out. Wires for my setup were blue to white, green to white, and either black to black. Definitely make sure the included directions work for your setup before removing (and destroying) the old one.

    By NotSoFast from NC

    BOTTOM LINE not recommended

  • 4

    4

    2020-11-11

    4

    4

    Buyer Beware

    Buyer Beware

    Submitted 2020-11-11

    By Kmurfone

    From St. Louis, MO

    I purchased this OEM brand O2 sensor for my 2007 Suburban and it is the downstream sensor. After opening the box, I found that that the sensor doesn't come with a plug but just bare wires with four wire crimp splices and heat shrink sleeve. Had I known this, I wouldn't have purchased this sensor. Later I found out that it is a universal type sensor so that is why it doesn't come with a plug to plug into the vehicle's wire harness. Then I noticed on Advance Auto Parts website, the "Universal" word in the sensor type. In this case, Universal, means that it won't have a plug and you'll have to splice wires together at installation, so buyer beware. I also purchased the Denso upstream sensor from Advance Auto Parts and it is a Direct Fit type which means that it has the plug and requires no wire splicing. I don't understand why Advance Auto Parts doesn't sell the downsteam sensor with the plug on the wires.

    Bottom Line not recommended

    I purchased this OEM brand O2 sensor for my 2007 Suburban and it is the downstream sensor. After opening the box, I found that that the sensor doesn't come with a plug but just bare wires with four wire crimp splices and heat shrink sleeve. Had I known this, I wouldn't have purchased this sensor. Later I found out that it is a universal type sensor so that is why it doesn't come with a plug to plug into the vehicle's wire harness. Then I noticed on Advance Auto Parts website, the "Universal" word in the sensor type. In this case, Universal, means that it won't have a plug and you'll have to splice wires together at installation, so buyer beware. I also purchased the Denso upstream sensor from Advance Auto Parts and it is a Direct Fit type which means that it has the plug and requires no wire splicing. I don't understand why Advance Auto Parts doesn't sell the downsteam sensor with the plug on the wires.

    By Kmurfone from St. Louis, MO

    BOTTOM LINE not recommended

  from $81.99

  View Product
• 

  DENSO - Oxygen Sensor 4 Wire, Direct Fit, Heated, Wire Length: 23.23 (Part No. 234-4626)

  Description

  DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO's exclusive aluminum oxide trap
  
  Product Features:

  • Specifically designed to meet the increasing demands of today's engines
  • 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
  • Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
  • Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle's fuel efficiency
  • Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

  3.0

  Read 3 review(s)

  Review snapshot ® by PowerReviews

  3.0

  3.0

  • 1

    1

    2020-06-15

    1

    1

    No

    No

    Submitted 2020-06-15

    By Chris

    From Kennesaw

    Doesn't fit Lexus is300. Despite what website says

    Bottom Line NULL

    Doesn't fit Lexus is300. Despite what website says

    By Chris from Kennesaw

    BOTTOM LINE NULL

  • 5

    5

    2019-10-31

    5

    5

    Yes

    Yes

    Submitted 2019-10-31

    By Corey

    From Undisclosed

    It's great

    Bottom Line NULL

    It's great

    By Corey from Undisclosed

    BOTTOM LINE NULL

  • 1

    1

    2019-05-06

    1

    1

    dont fit

    dont fit

    Submitted 2019-05-06

    By billy642

    From Rhode Island

    wrong part for camry

    Bottom Line not recommended

    wrong part for camry

    By billy642 from Rhode Island

    BOTTOM LINE not recommended

  from $106.99

  View Product
• 

  Bosch - Oxygen Sensor (Part No. 15733)

  Description

  Bosch is the world's leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.
  
  Product Features:

  • Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
  • Includes Smart Link Connector, no soldering required
  • No special tools required for installation
  • Seared protection tube due to 100% functional quality test
  • Performance meets or exceeds OE specifications

  from $77.99

  View Product
• 

  DENSO - Oxygen Sensor 4 Wire, Direct Fit, Heated, Wire Length: 25.59 (Part No. 234-4139)

  Description

  DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO's exclusive aluminum oxide trap
  
  Product Features:

  • Specifically designed to meet the increasing demands of today's engines
  • 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
  • Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
  • Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle's fuel efficiency
  • Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

  from $117.99

  View Product
• 

  DENSO - Oxygen Sensor 4 Wire, Universal, Heated, Wire Length: 11.77 (Part No. 234-4206)

  Description

  DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO's exclusive aluminum oxide trap
  
  Product Features:

  • Specifically designed to meet the increasing demands of today's engines
  • 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
  • Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
  • Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle's fuel efficiency
  • Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

  from $85.99

  View Product
• 

  DENSO - First Time Fit Oxygen Sensor (Part No. C5010112397ND)

  Description

  Denso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.
  
  Product Features:

  • SUPERIOR DESIGN - Maximizes engine performance and fuel efficiency while reducing harmful emissions.
  • DOUBLE-PROTECTION COVER - Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
  • ALUMINUM-OXIDE TRAP LAYER - Keeps silicone and lead outside the ceramic element through DENSO's exclusive design, preventing damage to the platinum electrode.
  • STAINLESS STEEL HOUSING - Resists corrosion and contamination with a rugged, watertight body.
  • POROUS PTFE FILTER - Allows atmospheric oxygen to enter the sensor without permitting water or engine contaminants to seep into the casing. Denso First Time Fit oxygen sensors are coated with a special formulation of aluminum oxide to trap impurities outside of the ceramic element. In head-to-head testing against the leading competitors, DENSO oxygen sensors were rated two times more resistant to silicone and lead poisoning. Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install. Recommended Installation Tool - 234-0100, O2 Sensor Socket Set

  from $135.41

  View Product
• 

  DENSO - Oxygen Sensor (Part No. C5010417346NDP)

  from $335.09

  View Product
• 

  DENSO - First Time Fit Oxygen Sensor (Part No. C5010112389ND)

  Description

  Denso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.
  
  Product Features:

  • SUPERIOR DESIGN - Maximizes engine performance and fuel efficiency while reducing harmful emissions.
  • DOUBLE-PROTECTION COVER - Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
  • ALUMINUM-OXIDE TRAP LAYER - Keeps silicone and lead outside the ceramic element through DENSO's exclusive design, preventing damage to the platinum electrode.
  • STAINLESS STEEL HOUSING - Resists corrosion and contamination with a rugged, watertight body.
  • POROUS PTFE FILTER - Allows atmospheric oxygen to enter the sensor without permitting water or engine contaminants to seep into the casing. Denso First Time Fit oxygen sensors are coated with a special formulation of aluminum oxide to trap impurities outside of the ceramic element. In head-to-head testing against the leading competitors, DENSO oxygen sensors were rated two times more resistant to silicone and lead poisoning. Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install. Recommended Installation Tool - 234-0100, O2 Sensor Socket Set

  from $141.97

  View Product
• 

  DENSO - First Time Fit Oxygen Sensor (Part No. C5010112414ND)

  Description

  Denso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.
  
  Product Features:

  • SUPERIOR DESIGN - Maximizes engine performance and fuel efficiency while reducing harmful emissions.
  • DOUBLE-PROTECTION COVER - Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
  • ALUMINUM-OXIDE TRAP LAYER - Keeps silicone and lead outside the ceramic element through DENSO's exclusive design, preventing damage to the platinum electrode.
  • STAINLESS STEEL HOUSING - Resists corrosion and contamination with a rugged, watertight body.
  • POROUS PTFE FILTER - Allows atmospheric oxygen to enter the sensor without permitting water or engine contaminants to seep into the casing. Denso First Time Fit oxygen sensors are coated with a special formulation of aluminum oxide to trap impurities outside of the ceramic element. In head-to-head testing against the leading competitors, DENSO oxygen sensors were rated two times more resistant to silicone and lead poisoning. Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install. Recommended Installation Tool - 234-0100, O2 Sensor Socket Set

  from $124.49

  View Product
• 

  DENSO - Oxygen Sensor 4 Wire, Direct Fit, Heated, Wire Length: 25.59 (Part No. 234-4214)

  Description

  DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO's exclusive aluminum oxide trap
  
  Product Features:

  • Specifically designed to meet the increasing demands of today's engines
  • 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
  • Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
  • Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle's fuel efficiency
  • Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

  from $117.99

  View Product
• 

  DENSO - Universal Oxygen Sensor (Part No. C5010100824ND)

  Description

  Denso Universal First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor. Denso First Time Fit oxygen sensors are coated with a special formulation of aluminum oxide to trap impurities outside of the ceramic element. In head-to-head testing against the leading competitors, DENSO oxygen sensors were rated two times more resistant to silicone and lead poisoning.
  
  Product Features:

  • SUPERIOR DESIGN - Maximizes engine performance and fuel efficiency while reducing harmful emissions.
  • DOUBLE-PROTECTION COVER - Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
  • ALUMINUM-OXIDE TRAP LAYER - Keeps silicone and lead outside the ceramic element through DENSO's exclusive design, preventing damage to the platinum electrode.
  • STAINLESS STEEL HOUSING - Resists corrosion and contamination with a rugged, watertight body.
  • POROUS PTFE FILTER - Allows atmospheric oxygen to enter the sensor without permitting water or engine contaminants to seep into the casing. Critical Installation Notes: Please read the installation directions included in the box before removal of the original oxygen sensor form the vehicle. - Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering. Recommended Installation Tool - 234-0100, O2 Sensor Socket Set

  from $78.59

  View Product