Lexus RX400H Steering and Chassis Parts
Top Lexus RX400H Steering and Chassis Parts Categories
We carry over 45 Steering and Chassis Parts in inventory for the Lexus RX400H. If you’re looking for aftermarket Steering and Chassis Parts for your Lexus RX400H, check out all these categories:
Essential Lexus RX400H Steering and Chassis Parts
Energy Suspension – TrackBarBsh (Part No.8.7105R)
from
$21.99
TrackBarBsh
MOOG – Suspension Stabilizer Bar Bushing Kit (Part No.K200617)
from
$16.79
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
- EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- Inner sleeve is phosphate coated for corrosion protection
MOOG – Front Right Lower Suspension Control Arm and Ball Joint Assembly (Part No.RK620333)
from
$132.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
- LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
Dorman – Steering Knuckle (Part No.698-162)
from
$322.99
This steering knuckle is precision-engineered and rigorously tested to provide reliable replacement for the original knuckle on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – this steering knuckle is designed to replace the original knuckle on specific vehicles
- Reliable fit – precision-engineered to match the dimensions of original components
- Trustworthy construction – manufactured to strict standards using durable materials
- Rigorously tested – thorough quality control measures ensure longevity
Dorman – Steering Knuckle (Part No.698-163)
from
$322.99
This steering knuckle is precision-engineered and rigorously tested to provide reliable replacement for the original knuckle on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – this steering knuckle is designed to replace the original knuckle on specific vehicles
- Reliable fit – precision-engineered to match the dimensions of original components
- Trustworthy construction – manufactured to strict standards using durable materials
- Rigorously tested – thorough quality control measures ensure longevity
Energy Suspension – SwyBarBshKt (Part No.8.5135R)
from
$19.99
SwyBarBshKt
Energy Suspension – SwyBarBshKt (Part No.8.5136G)
from
$28.99
SwyBarBshKt
Driveworks – Camber Bolt Kit (Part No.DW-K929)
from
$29.99
Driveworks Brand Camber Cam Bolt Kit is mainly used for car chassis suspension system.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Precision engineered for improved ride and superior performance
- Performance tested to ensure durability
Carquest Premium – Ball Joint (Part No.410-71905)
from
$36.99
Product Features:
See More
- OE matched design for Form, Fit, and Function
- Advanced corrosion-resistant electro-coating to reduce rust
- Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
- Hex formed studs &/or wrench flats for ease of installation
- Hardware included for easier installation (where applicable)
- Pre-applied threadlocker keeps fasteners from loosening due to vibration
Carquest Premium – Ball Joint (Part No.410-71903)
from
$36.99
Product Features:
See More
- OE matched design for Form, Fit, and Function
- Advanced corrosion-resistant electro-coating to reduce rust
- Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
- Hex formed studs &/or wrench flats for ease of installation
- Hardware included for easier installation (where applicable)
- Pre-applied threadlocker keeps fasteners from loosening due to vibration
MOOG – Alignment Camber Kit (Part No.K90475)
from
$27.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
MOOG – Alignment Camber Kit (Part No.K90208)
from
$29.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
Dorman – Loaded Knuckle (OE Fix) (Part No.698-426)
from
$377.99
Fixing a worn wheel bearing would traditionally require a difficult procedure using a hydraulic press, or purchasing multiple components. This Dorman OE FIX loaded knuckle includes all critical components already assembled for a fast, simple, safe install. For repair shops, that makes it less likely that you will have a vehicle stuck in the service bay. For vehicle owners, that makes this formerly complex job requiring special equipment much easier.
Product Features:
See More
Product Features:
- Pre-pressed assembly – this complete loaded knuckle kit includes all necessary components ready for installation right out of the box
- Saves hours – eliminates the possibility of extended time spent wrestling with individual corroded components
- Simpler solution – no need for hydraulic press to perform complete bearing repair, making replacement faster and more predictable for both professionals and DIYers
- Quality engineering – designed in the United States and backed by a century of automotive aftermarket experience
Driveworks – Control Arm Cam Bolt Kit (Part No.DW-K90208)
from
$21.99
Driveworks Brand Control Arm Cam Bolt Kits are made to meet OE specifications. They work with the sway bar to reinforce the suspension system, preventing excessive body roll. Driveworks Brand chassis parts help ensure improved steering response.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Precision engineered for improved ride and superior performance
- Performance tested to ensure durability
Driveworks – Camber Bolt Kit (Part No.DW-K90477)
from
$27.49
Driveworks cam bolts easily install in place of the factory lower control arm mounting bolts.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Precision engineered for improved ride and superior performance
- Performance tested to ensure durability
MOOG – Alignment Camber Bolt Assortment (Part No.CAM1A)
from
$438.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can solve excessive tire wear and steering issues
- Provides like-new steering, ease of installation and longer life
- Can bring vehicles back to factory specification
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
MOOG – Steering Tie Rod End (Part No.ES80944)
from
$58.99
Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER« GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Rare Parts – Tie Rod End (Part No.RP28518)
from
$99.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Carquest Premium – Tie Rod End (Part No.310-96837)
from
$53.99
Carquest Premium tie rods are engineered and benchmarked to original equipment (O.E.) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Carquest Premium tie rods utilize the same joint technology as the OE part, with either a sealed (maintenance-free) design or a metal-on-metal (greaseable) design. We feature a corrosion-resistant coating on all tie rods to reduce rust. Each part number in the Carquest Premium tie rod line is designed and built to deliver the quality that you demand.
Product Features:
See More
Product Features:
- Engineered for OE fit, form and function
- Corrosion-resistant coating to reduce rust and extend service life
- Hex formed studs and/or wrench flats for easier installation (where applicable)
- Joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
- Sealed designs feature a fully polished ball stud combined with synthetic bearing technology for smooth operation, improved reliability and no maintenance
- Inner tie rod ends are supplied with thread locking compound
- Hardware included for easier installation (where applicable)
MOOG – Suspension Stabilizer Bar Link (Part No.K90344)
from
$57.99
Product Features:
See More
- EASY TO INSTALL – Wrench flats ensure easy installation and removal
- GREASEABLE SOCKET – Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT – Sealed boot shields internal components from wear-causing contaminants
- STRONG AND DURABLE – Thick connecting rod adds strength while metal bearings and rubber preload deliver long life
- PREMIUM MATERIALS – Made from premium materials for long-lasting dependability
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Driveworks – SWAY BAR LINK KIT 1 EA DRIVE (Part No.DW-K90345)
from
$63.99
Driveworks Brand sway bar link kits are made to meet OE specifications. They work with the sway bar to reinforce the suspension system, preventing excessive body roll. Driveworks Brand chassis parts help ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Premium Polychloroprene boot with grease relief valve keeps contaminants out
- Performance tested to ensure durability
MOOG – Suspension Stabilizer Bar Link (Part No.K90345)
from
$79.99
Product Features:
See More
- EASY TO INSTALL – Wrench flats ensure easy installation and removal
- GREASEABLE SOCKET – Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT – Sealed boot shields internal components from wear-causing contaminants
- STRONG AND DURABLE – Thick connecting rod adds strength while metal bearings and rubber preload deliver long life
- PREMIUM MATERIALS – Made from premium materials for long-lasting dependability
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Driveworks – BALL JOINT 1 EA DRIVE (Part No.DW-K90346)
from
$35.99
Driveworks Brand ball joints are made to meet OE specifications. They play a critical role in the safe operation of the vehicle by eliminating unstable front-end suspension. Driveworks Brand chassis parts ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Premium Polychloroprene boot provides extended temperature range and better wear resistance
- Test-proven stud material helps prevent premature stud failure
- Provides premium gauge steel construction for strength and durability
- Performance tested to ensure durability
Driveworks – BALL JOINT 1 EA DRIVE (Part No.DW-K90347)
from
$35.99
BALL JOINT 1 EA DRIVE
MOOG – Suspension Ball Joint (Part No.K90346)
from
$43.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- Hardened ball stud made of OE equivalent or better materials to withstand higher loads
- Easy to install.
- Construction and design validated by MOOG engineers
- Premium forged housing with increased cross section of up to 52% more material in key areas
- Broad coverage for foreign and domestic applications
- Designed to meet or exceed original equipment performance
Lexus RX400H Steering and Chassis Parts Categories
Helping You Find the Right Steering and Chassis Parts for Your Lexus RX400H
You love your RX400H. So we’ve made it easier than ever to help you find Lexus RX400H Steering and Chassis Parts in our online catalog. Our inventory holds 45 aftermarket and OEM Steering and Chassis Parts for your Lexus RX400H, ranging from $7.99 to $438.99.
We offer parts from 7 brands trusted to make quality Steering and Chassis Parts for your Lexus RX400H. Before you buy, take some time to read through customer reviews. We currently have 420 reviews of Lexus RX400H Steering and Chassis Parts from previous customers. Some of the top rated parts include Suspension Ball Joint with 3.9 stars and Front Left Lower Suspension Control Arm and Ball Joint Assembly with 5.0 stars.
Find your RX400H Steering and Chassis Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Lexus RX400H part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Steering and Chassis Parts Brands for Your Lexus RX400H
Our inventory holds Steering and Chassis Parts for your Lexus RX400H from 7 trusted brands. You’ll find OEM and aftermarket parts from brands like DriveWorks, Moog, and Carquest Premium, all of which can keep that Lexus happy.
We have Driveworks parts available for your Lexus RX400H in categories like Ball Joints and Alignment Kits. Some of the top-rated Driveworks parts in these categories are:
Top-Rated Driveworks Steering and Chassis Parts
Leading Driveworks Steering and Chassis Parts
We carry Driveworks brand parts for your Lexus RX400H across several catalog categories, including Sway Bars and Ball Joints. Some of our most reviewed Driveworks parts include:
FAQs for Lexus RX400H Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the Lexus RX400H?
Out of 45 Steering and Chassis Parts for the Lexus RX400H, the most popular in our inventory are:
What are the top-rated Lexus RX400H Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your Lexus RX400H based on customer reviews/ratings are:
from
$99.99
(6)
Front Left Lower Suspension Control Arm and Ball Joint Assembly
“great price and quality”
