Lexus RX400H Drivetrains

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Designed to repair damaged, grooved or worn shafts
• Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
• Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
• Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
• Easy to install with removable flange and installation tool
• Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:

• Designed to meet or exceed OE specifications for fit, form and function
• 100% new axle and components
• New axle nut or attaching hardware included when applicable
• Bearings, races and housings are heat-treated for longer life
• Precision-engineered seal mating surfaces for leak-free performance
• High moly CV joint grease with stainless-steel boot bands

Manufactured to be an OE replacement, CV axles use 100% new materials and are engineered for ease of installation and long service.

Product Features:

• All New Materials
• Engineered for OE Fitment
• -40 Degree Rated CV Boots
• Moly-Blend Grease in inner and outer joints
• New nut and mounting hardware included if required

Manufactured to be an OE replacement, CV axles use 100% new materials and are engineered for ease of installation and long service.

Product Features:

• All New Materials
• Engineered for OE Fitment
• -40 Degree Rated CV Boots
• Moly-Blend Grease in inner and outer joints
• New nut and mounting hardware included if required

Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to LEXUS 01-20; TOYOTA 01-19;. Please verify your application.

Product Features:

• MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
• HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
• READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
• For Years: 2001-2020
• Weight approx: 2 Lbs
• BEARING ID / BORE: 1.1811 INCH / 30 MM
• CENTERLINE: 0.10 INCH / 3 MM
• MOUNT WIDTH: 7.00 INCH / 178 MM
• STYLE: ROUND FRAME
• WITH WINGS

Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to LEXUS 99-20; TOYOTA 01-20;. Please verify your application.

Product Features:

• MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
• HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
• READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
• For Years: 1999-2020
• Weight approx: 2 Lbs
• BEARING ID / BORE: 1.1811 INCH / 30 MM
• CENTERLINE: 0.10 INCH / 3 MM
• MOUNT WIDTH: 7.00 INCH / 178 MM
• STYLE: ROUND FRAME
• WITH WINGS
• WITH ELEVATED MOUNTING PLATFORM

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Design type: spring loaded; multi-lip
• Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
• Resistance to EP lubricants
• Low swell in hydrocarbon fluids
• Delivers quality and reliable performance for every type of repair

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Design type: spring loaded; multi-lip
• Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
• Good low temperature capability
• Low swell in hydrocarbon fluids
• Delivers quality and reliable performance for every type of repair

FEQ manufactures OE quality wheel hub assemblies that provide heavy duty performance, improved fuel economy and reduced weight. FEQ wheel bearing hubs are maintenance free – fully lubricated and sealed for life.

Product Features:

• Integrated sensors and electronics for reliable function
• Factory sealed assembly eliminates contamination
• No need for pre-load adjustment at assembly
• Compact and lightweight
• Minimizes axial space requirements

Valvoline is the No. 1 ATF brand, and now we’ve taken it to the next level with our hybrid performance fluid: Valvoline Full Synthetic Hybrid Automatic Transmission Fluid. Specifically designed for hardworking hybrids, Valvoline Full Synthetic Hybrid ATF is suitable for use in more than 95% of hybrid vehicles in operation with registered US ATF full hybrid vehicles (not including mild hybrids, traditional CVT or DCT hybrid models). Valvoline Full Synthetic Hybrid ATF is proven to maximize transmission life, and it’s compatible with copper and the coatings on copper in hybrid transmission, providing greater oxidation stability, insulation for the electrical current, and increased heat transfer capabilities to protect against transmission failure. Look for Valvoline’s complete lineup of hybrid performance fluids, including motor oil and antifreeze/coolant ¿ from the brand trusted for over 150 years.

Product Features:

• Full synthetic hybrid ATF with Copper Care Technology, from the No. 1 ATF brand
• Enhanced protection against corrosion that can result in hybrid transmission failure
• Protects electrical systems maximizing transmission efficiency
• Increased heat transfer capabilities to protect against higher temperatures produced by hybrids

Royal Purple Motor Oil is a specially formulated multi viscocity oil for use in gasoline and diesel engines of all types from cars and trucks to SUVs, motorcycles and boats. Royal Purple(R) Motor Oil with Synerlec(R) additive technology reduces friction, which results in a 1-3 percent increase in horsepower, lowers operating temperatures, provides superior corrosion protection, improves fuel economy, reduces emissions and extends oil life. A.P.I. Certified.

Product Features:

• Better wear protection
• Increased fuel efficiency
• Better protection of the expensive catalytic emission system
• Improved compatibility with fuels containing ethanol
• Superior corrosion protection
• Meets ILSAC GF-5 and Dexos1 performance requirements

Formulated to meet the specific requirements of Toyota, Lexus, and Scion vehicles equipped with conventional (non-CVT) transmissions that require the use of Toyota ATF WS. Recommended for service-fill in all Toyota, Lexus, and Scion automatic transmissions where ATF WS is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.

Product Features:

• Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
• Optimized viscosity and advanced friction reducing additive technology provide exceptional fuel economy performance
• Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
• Exceptional wear protection of gears and bearings
• Provides superior deposit control and protects metal surfaces from rust and corrosion
• Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking

This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
• Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Design type: spring loaded; multi-lip
• Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
• Resistance to EP lubricants
• Low swell in hydrocarbon fluids
• Delivers quality and reliable performance for every type of repair

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Designed to repair damaged, grooved or worn shafts
• Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
• Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
• Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
• Easy to install with removable flange and installation tool