Lexus RC300 Drivetrains
Top Lexus RC300 Drivetrains Categories
We carry over 10 Drivetrains in inventory for the Lexus RC300. If you’re looking for aftermarket Drivetrains for your Lexus RC300, check out all these categories:
Essential Lexus RC300 Drivetrains
Dorman – Rear Drive Shaft (Part No.986-316)
from
$886.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Valvoline – MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.VV324)
from
$12.79
Product Features:
See More
- High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks
- Long-life friction modifiers and premium base oils help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
- Enhanced cleaning additives help reduce varnish formation and keep the transmission running properly longer
- Engineered with a unique blend of viscosity modifiers and base oils to provide better oil flow at low temperatures and greater film protection at higher temperatures
Idemitsu – Type TLS-LV Automatic Transmission Fluid – 1 qt (Part No.30040096-75000C)
from
$14.49
Formulated to meet the specific requirements of Toyota, Lexus, and Scion vehicles equipped with conventional (non-CVT) transmissions that require the use of Toyota ATF WS. Recommended for service-fill in all Toyota, Lexus, and Scion automatic transmissions where ATF WS is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.
Product Features:
See More
Product Features:
- Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
- Optimized viscosity and advanced friction reducing additive technology provide exceptional fuel economy performance
- Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
- Exceptional wear protection of gears and bearings
- Provides superior deposit control and protects metal surfaces from rust and corrosion
- Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
NTN – Differential Bearing (Part No.J7060741150NTN)
from
$39.19
Differential Bearing
National – Shaft Repair Sleeve (Part No.99147)
from
$41.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6098)
from
$137.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to LEXUS 05-20;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 2005-2020
- Weight approx: 2 Lbs
- BEARING ID / BORE: 1.1811 INCH / 30 MM
- CENTERLINE: 0.10 INCH / 3 MM
- MOUNT WIDTH: 5.75 INCH / 146 MM
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6099)
from
$54.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to LEXUS 06-20;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 2006-2020
- Weight approx: 2 Lbs
- BEARING ID / BORE: 1.1811 INCH / 30 MM
- CENTERLINE: 0.50 INCH / 13 MM
- MOUNT WIDTH: 5.75 INCH / 146 MM
Dorman – Spindle Nut M22-1.50 Hex Star Pattern (sold by each) (Part No.615-224)
from
$8.49
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Spindle Nut (Part No.K1002751713DOR)
from
$16.08
Spindle Nut
National – Shaft Repair Sleeve (Part No.99166)
from
$34.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Lexus RC300 Drivetrains Categories
Helping You Find the Right Drivetrains for Your Lexus RC300
You love your RC300. So we’ve made it easier than ever to help you find Lexus RC300 Drivetrains in our online catalog. Our inventory holds 10 aftermarket and OEM Drivetrains for your Lexus RC300, ranging from $8.49 to $886.99.
We offer parts from 6 brands trusted to make quality Drivetrains for your Lexus RC300. Before you buy, take some time to read through customer reviews. We currently have 7,140 reviews of Lexus RC300 Drivetrains from previous customers. Some of the top rated parts include Shaft Repair Sleeve with 4.0 stars.
Find your RC300 Drivetrains here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Lexus RC300 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Drivetrains Brands for Your Lexus RC300
Our inventory holds Drivetrains for your Lexus RC300 from 6 trusted brands. You’ll find OEM and aftermarket parts from brands like Valvoline, Idemitsu, and Dorman, all of which can keep that Lexus happy.
We have Valvoline parts available for your Lexus RC300 in categories like Differentials. Some of the top-rated Valvoline parts in these categories are:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for Lexus RC300 Drivetrains
What are the most purchased Drivetrains for the Lexus RC300?
Out of 10 Drivetrains for the Lexus RC300, the most popular in our inventory are:
from
$14.49
This product is not rated
Type TLS-LV Automatic Transmission Fluid – 1 qt
Differential Oil
from
$8.49
This product is not rated
Spindle Nut M22-1.50 Hex Star Pattern (sold by each)
Spindle Lock Nuts
What are the top-rated Lexus RC300 Drivetrains?
Top-rated Drivetrains for your Lexus RC300 based on customer reviews/ratings are:
from
$41.49
(2)
Shaft Repair Sleeve
“Used this to repair a camshaft sealing surface on a 2000 Sienna. it worked incredibly well and was easy to use. My first time using a repair sleeve ”
