Lexus LS600h Oil and Lubricants

FRAM Conventional High Mileage 5W20 Engine Oil is specially designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 5W20 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed all new car manufacturers’ warranty requirements as well as the stringent industry standards API SP/CF, and 5W20 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.

Product Features:

• Formulated with a unique combination of premium base oils and an enhanced additive system
• Provides increased protection in higher mileage engines
• Helps restore seal condition to reduce oil consumption
• Increases protection against high temperature deposits and ring sticking
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.
• Specially formulated for high mileage engines: FRAM High Mileage 5W20 1 QT is designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines, making it an ideal choice for vehicles with over 75,000 miles.

Quaker State Full Synthetic 0W-20 motor oil delivers strong engine performance and protection against deposits between oil changes. It’s designed to protect today’s sophisticated engines, including modern turbocharged engines. Quaker State Full Synthetic motor oil is the best of the Quaker State portfolio. It can be used in both new and older vehicles, especially high performance vehicles such as sports cars, SUVs, trucks, and minivans. Additionally, Quaker State Full Synthetic 0W-20 is compatible with biofuels ranging from E10 to E85 and is suitable for hybrid engines. It provides high resistance to oxidation, keeping the oil fresher for longer, and it reduces friction to maximize horsepower in your vehicle (compared to Quaker State conventional and synthetic blend motor oils). It exceeds the requirements of the following industry specifications: API SP-Resource Conserving, API SN Plus and all previous categories; ILSAC GF-6a and all previous ILSAC Standards. Quaker State Full Synthetic 0W-20 motor oil meets the specifications for: Chrysler MS-6395; GM dexos1 Gen 2; Ford WSS-M2C947-A; Ford WSS-M2C947-B1. For a full list of equipment approvals and recommendations, please consult your local Quaker State Technical Help Desk and always consult your owner’s manual.

Product Features:

• Full synthetic 0W-20 motor oil provides strong engine performance and protection against deposits between oil changes
• Provides improved fuel economy (based on the latest industry standard)
• Designed to provide more performance with superior lubrication flow and pumpability at high and low temperatures (compared to Quaker State conventional and synthetic blend motor oils).
• Formulated with high resistance to oxidation, keeping the oil fresher for longer.
• Reduces friction to maximize horsepower (compared to Quaker State conventional and synthetic blend motor oils)
• Maintains required viscosity from start to finish, providing optimal protection
• Suitable for all car, SUV, light van, truck gasoline and turbocharged engines; under all driving conditions.
• Compatible with biofuels ranging from E10 to E85 and suitable for hybrid vehicles.
• Versatile Compatibility: Designed for both new and older vehicles, this motor oil is ideal for high-performance vehicles such as sports cars, SUVs, trucks, and minivans.
• Enhanced Performance for Modern Engines: Specifically formulated to protect today’s sophisticated engines, including modern turbocharged engines, and suitable for hybrid engines.
• Meets Industry Standards: Exceeds the requirements of API SP-Resource Conserving, API SN Plus, ILSAC GF-6a, and meets specifications for Chrysler MS-6395, GM dexos1 Gen 2, Ford WSS-M2C947-A, and Ford WSS-M2C947-B1.

Pennzoil Platinum Full Synthetic 0W-20 is designed to maximize engine protection and is backed by a 15,000-mile protection guarantee to protect your pursuit of every mile. Made with natural gas, it is formulated for complete protection for top engine performance. Pennzoil Platinum offers cleaner pistons (based on Sequence IIIH results; does not apply to SAE 0W-16 or Pennzoil Platinum Euro motor oil), helps protect engines from loss of power, delivers better fuel economy (based on the latest industry standard), provides unsurpassed wear protection (based on Sequence IVA wear test using SAE 5W-30), and provides excellent performance in extreme temperatures. Pennzoil Platinum Full Synthetic 0W-20 provides the same engine protection as a 5W-20 and is suitable for use in vehicles currently using SAE 5W-20. (Pennzoil Platinum Lubrication Limited Warranty: Protection for up to 15,000 miles or one year, whichever comes first. Use an oil filter designed for longer oil change intervals and follow OEM manual and vehicles oil life sensor to maintain OEM warranty. Excludes severe driving conditions, including racing and commercial use. Your engine must have fewer than 125,000 miles and have been manufactured in the past 72 months. Enrollment required. Other conditions apply. See pennzoil.com/warranty to enroll and for full details and terms.)

Product Features:

• Full synthetic 0W-20 motor oil that is made with natural gas and designed to maximize engine protection
• Backed by a 15,000-mile protection guarantee to protect your pursuit of every mile
• Provides better fuel economy (based on the latest industry standards)
• Keeps pistons cleaner than the toughest industry standard (based on Sequence IIIH results)
• Provides unsurpassed wear protection (based on Sequence IVA wear test using SAE 5W-30)
• Formulated to provide faster low-temperature oil flow and protection in extreme heat
• Helps protect engines from loss of power
• Meets or exceeds the following OEM requirements: Chrysler MS-6395; GM dexos1 Gen. 3; Ford WSS-M2C9262-A
• Meets or exceeds the requirements of the following industry specifications: API SP, API SP-Resource Conserving, and all previous categories; ILSAC GF-6A
• For a full list of equipment approvals and recommendations, please consult your local Shell Technical Help Desk and always consult your owner’s manual

Castrol EDGE High Mileage 0W-20 is an advanced full synthetic motor oil that is specifically designed for vehicles with over 75,000 miles. It’s been engineered to reduce leaks, burnoff and power robbing deposits, but also contains a proprietary additive to protect the emission system. Our Phosphorus Replacement Technology reduces harmful phosphorus to protect the catalytic converter and extend maximum performance. It is the natural choice for drivers who demand maximum performance from their high mileage car.

Product Features:

Product Features:
• Phosphorus Replacement Technology to help extend the life of the emission system
• Reduces leaks, oil burnoff and power robbing deposits
• 15,000 miles between oil changes (1)
• (1) Or one year, whichever comes first
• Meets or exceeds the following specifications:
• API SP/SN PLUS/SN/SM
• ILSAC GF-6
• Meets Ford WSS-M2C947-B1
• Meets engine test requirements of Chrysler MS 6395
• Meets Ford WSS-M2C962-A1

75,000 miles is more than a mile marker. It’s a signal that your engine is ready for greater protection. That’s when you need Valvoline High Mileage with MaxLife Technology Motor Oil. Its exclusive formula is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles. Our mixture is specially developed with a unique combination of synthetic and premium conventional oils to protect your high-mileage motor against wear, friction, heat, and deposits – the four major causes of engine breakdown and expensive repairs. Anti-wear additives defend critical engine components, advanced friction-fighting agents reduce heat and abrasion, added detergents clean the inside of your engine, and premium seal conditioners handle aging seals to prevent leaks. It fights sludge, corrosion and rust that can rob your engine of horsepower, fuel efficiency and longevity. From extreme temperatures and cold starts to stop-and-go traffic and frequent short trips, viscosity modifiers make sure the oil flows more easily, coats more completely, and resists thermal breakdown under even the most intense driving conditions. Its unique mixture curbs contaminants to keep high-mileage engines from burning and consuming oil that can foul spark plugs, creating higher emissions and causing your motor to run roughly.

Product Features:

• Maxlife technology prevents engine breakdown with 40% better wear protection than the industry standard
• Refresh aging seals and prevent leaks with seal conditioners
• Reduce sludge, deposits, corrosion, and rust with added detergents – keep motors clean inside
• Enhanced friction performance helps maximize power with advanced friction-fighting agents
• Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
• Synthetic Blend: Our unique combination of synthetic and premium conventional oils provides superior protection against wear, friction, heat, and deposits.

Fully synthetic LIQUI MOLY specialty with a unique additive technology. The powerful MFC (Molecular Friction Control) technology prevents formation of deposits while simultaneously reducing frictional losses. The synergetic effect provides optimum wear protection even under tough operating conditions. Improved fuel consumption and increased engine life are some of the end results. The oils fluorescent green color is typical for the MFC formulation.

Product Features:

Product Features:
• smooth engine running
• optimum oil pressure under all operating conditions
• long engine service life
• reduces pollutant emissions
• Enhanced fuel efficiency through advanced Molecular Friction Control technology.

Valvoline SAE 75W-90 Full Synthetic Gear Oil provides the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Engineered to outperform, our detergent package-based formulation contains Full Synthetic basestocks and special additives that help protect parts from rust and corrosion while providing exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity, wear resistance additives that assist in protecting gear teeth, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. Valvoline SAE 75W-90 Full Synthetic Gear Oil is recommended for use in axle applications requiring factory-fill or drain-and-fill levels for limited slip performance. Protect your gears with Valvoline, the No. 1 gear oil brand.

Product Features:

• EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION , ranging from -30F to 300F degrees
• REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
• FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
• MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP HYPOID DIFFERENTIALS where APPI GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4 or MT-1 fluid
• MEETS OR EXCEEDS THE PERFORMANCE REQUIREMENTS for Mack GO-H and GO-J; API GL-5 and API MT-1; MIL-PRF-2105E; and SAE J2360

We’ve squeezed innovation into every ounce of Valvoline FlexFill SAE 75W-140 Full Synthetic Gear Oil, the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Our unique new flexible pouch makes getting into the tightest places to lubricate gears easier than ever and with less waste. The superior detergent package-based formulation contains fully synthetic basestocks and special additives that help protect parts from rust and corrosion while providing exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity, wear resistance additives that assist in protecting gear teeth, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. Valvoline FlexFill SAE 75W-140 Full Synthetic Gear Oil is recommended for use in axle applications requiring factory-fill or drain-and-fill levels for limited slip performance.

Product Features:

• FLEXIBLE POUCH FOR EASIER USE WITH LESS WASTE in tight, hard to reach undercarriage situations.
• EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION ranging from -30F to 300F degrees for dependable coverage year-round
• REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
• MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP REAR DIFFERENTIALS where API GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4
• MEETS OR EXCEEDS PERFORMANCE REQUIREMENTS for Ford M2C-192A, GM 12346140, Chrysler MS-8985 and API GL-5

Quaker State Full Synthetic 0W-20 motor oil delivers strong engine performance and protection against deposits between oil changes. It’s designed to protect today’s sophisticated engines, including modern turbocharged engines. Quaker State Full Synthetic motor oil is the best of the Quaker State portfolio. It can be used in both new and older vehicles, especially high performance vehicles such as sports cars, SUVs, trucks, and minivans. Additionally, Quaker State Full Synthetic 0W-20 is compatible with biofuels ranging from E10 to E85 and is suitable for hybrid engines. It provides high resistance to oxidation, keeping the oil fresher for longer, and it reduces friction to maximize horsepower in your vehicle (compared to Quaker State conventional and synthetic blend motor oils). It exceeds the requirements of the following industry specifications: API SP-Resource Conserving, API SN Plus and all previous categories; ILSAC GF-6a and all previous ILSAC Standards. Quaker State Full Synthetic 0W-20 motor oil meets the specifications for: Chrysler MS-6395; GM dexos1 Gen 2; Ford WSS-M2C947-A; Ford WSS-M2C947-B1. For a full list of equipment approvals and recommendations, please consult your local Quaker State Technical Help Desk and always consult your owner’s manual.

Product Features:

• Full synthetic 0W-20 motor oil provides strong engine performance and protection against deposits between oil changes
• Provides improved fuel economy (based on the latest industry standard)
• Designed to provide more performance with superior lubrication flow and pumpability at high and low temperatures (compared to Quaker State conventional and synthetic blend motor oils).
• Formulated with high resistance to oxidation, keeping the oil fresher for longer.
• Reduces friction to maximize horsepower (compared to Quaker State conventional and synthetic blend motor oils)
• Maintains required viscosity from start to finish, providing optimal protection
• Suitable for all car, SUV, light van, truck gasoline and turbocharged engines; under all driving conditions.
• Compatible with biofuels ranging from E10 to E85 and suitable for hybrid vehicles.

Pennzoil 0W-20 Full Synthetic motor oil is designed to let you go farther between oil changes. It provides better engine protection and is backed by a 10,000-mile protection guarantee to give you peace of mind that your engine is protected now and for all the miles ahead. Pennzoil Full Synthetic motor oil is formulated for longer drain intervals than conventional and synthetic blend motor oils, offers enhanced wear protection in high and low temperatures, provides excellent resistance to oil breakdown in severe environments, and helps prevent sludge and deposit build-up. Suitable for both new and old engines. It also provides the same engine protection as a 5W-20 and is suitable for use in vehicles currently using SAE 5W-20. (Compared to Pennzoil motor oil. Pennzoil Full Synthetic Lubrication Limited Warranty: Protection for up to 10,000 miles or one year, whichever comes first. Use an oil filter designed for longer oil change intervals and follow OEM manual and vehicles oil life sensor to maintain OEM warranty. Excludes severe driving conditions, including racing and commercial use. Your engine must have fewer than 125,000 miles and have been manufactured in the past 72 months. Enrollment required. Other conditions apply. See pennzoil.com/warranty to enroll and for full details and terms.)

Product Features:

Product Features:
• Full Synthetic 0W-20 motor oil provides better engine protection to give you peace of mind
• Backed by a 10,000-mile protection guarantee to help you go farther between oil changes
• Suitable for both new and old engines
• Offers enhanced wear protection in high and low temperatures
• Do fewer oil changes compared to conventional motor oil formulated for longer drain intervals than conventional and synthetic blend motor oils
• Provides excellent resistance to oil breakdown in severe environments
• Helps prevent sludge and deposit build-up
• Exceeds the requirements of the following industry specifications: API SP and all previous categories; ILSAC GF-6A
• Meets or exceeds the following OEM requirements: Chrysler MS-6395; Ford WSS-M2C962-A1
• For a full list of equipment approvals and recommendations, please consult your local Shell Technical Help Desk and always consult your owner’s manual

Pennzoil Ultra Platinum Full Synthetic 0W-20 motor oil is our most advanced formulation with unbeatable wear and sludge protection, as well as unbeatable cleanliness. When it comes to torturous driving conditions, trust the unbeatable engine protection of Pennzoil Ultra Platinum. It far exceeds the most stringent car manufacturer requirements for cleanliness and protection (based on ILSAC GF-6); it offers outstanding performance in extreme temperatures and better fuel economy (based on the latest industry standard). Pennzoil Ultra Platinum helps extend the life of your engine and protects for up to 20 years or 750,000 miles, whichever comes first, to give you peace of mind to drive every mile as hard as you can, from your daily commute to sand dunes and mountain terrain. Pennzoil Ultra Platinum 0W-20 provides the same engine protection as a 5W-20 and is suitable for use in vehicles currently using SAE 5W-20. (Based on Sequence IVA wear test; Sequence IIIH oxidation and deposit test; and the Sequence VH sludge test. Pennzoil Ultra Platinum Lubrication Limited Warranty: Up to 20 years or 750,000 miles, whichever comes first, if you exclusively use Pennzoil Ultra Platinum Full Synthetic motor oil. Your engine must have fewer than 125,000 miles and have been manufactured in the past 72 months. To maintain your warranty, change your vehicles oil and oil filter at least as often as recommended by the vehicle manufacturer. Enrollment required. Keep your receipts. Other conditions apply. See pennzoil.com/warranty to enroll and for full details and terms.)

Product Features:

• Our most advanced full synthetic 0W-20 engine oil, designed for unbeatable engine protection
• Pennzoil Ultra Platinum comes with a 20-year, 750,000 mile warranty to protect your engine and give you peace of mind to drive every mile as hard as you can
• Made with natural gas
• Outstanding performance in extreme temperatures
• Designed for high-performance engines, it helps protect engines from loss of power
• Provides unsurpassed wear protection for your engine (based on Sequence IVA wear test using SAE 5W-30)
• Provides better fuel economy (based on the latest industry standard)
• Exceeds the requirements of the following industry specifications: API SP-Resource Conserving, API SP and all previous categories; ILSAC GF-6A, ACEA A1/B1
• Meets or exceeds the following OEM requirements: Chrysler MS-6395; Ford WSS-M2C947-A and WSS-M2C947-B1
• For a full list of equipment approvals and recommendations, please consult your local Shell Technical Help Desk and always consult your owner’s manual

Formulated to meet the specific requirements of Toyota, Lexus, and Scion vehicles equipped with conventional (non-CVT) transmissions that require the use of Toyota ATF WS. Recommended for service-fill in all Toyota, Lexus, and Scion automatic transmissions where ATF WS is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. Idemitsu is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. Idemitsu application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.

Product Features:

• Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
• Optimized viscosity and advanced friction reducing additive technology provide exceptional fuel economy performance
• Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
• Exceptional wear protection of gears and bearings
• Provides superior deposit control and protects metal surfaces from rust and corrosion
• Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
• Optimized viscosity and advanced friction reducing additive technology provide exceptional fuel economy performance
• Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
• Exceptional wear protection of gears and bearings
• Provides superior deposit control and protects metal surfaces from rust and corrosion

Pennzoil Platinum Full Synthetic 0W-20 is designed to maximize engine protection and is backed by a 15,000-mile protection guarantee to protect your pursuit of every mile. Made with natural gas, it is formulated for complete protection for top engine performance. Pennzoil Platinum offers cleaner pistons (based on Sequence IIIH results; does not apply to SAE 0W-16 or Pennzoil Platinum Euro motor oil), helps protect engines from loss of power, delivers better fuel economy (based on the latest industry standard), provides unsurpassed wear protection (based on Sequence IVA wear test using SAE 5W-30), and provides excellent performance in extreme temperatures. Pennzoil Platinum Full Synthetic 0W-20 provides the same engine protection as a 5W-20 and is suitable for use in vehicles currently using SAE 5W-20. (Pennzoil Platinum Lubrication Limited Warranty: Protection for up to 15,000 miles or one year, whichever comes first. Use an oil filter designed for longer oil change intervals and follow OEM manual and vehicles oil life sensor to maintain OEM warranty. Excludes severe driving conditions, including racing and commercial use. Your engine must have fewer than 125,000 miles and have been manufactured in the past 72 months. Enrollment required. Other conditions apply. See pennzoil.com/warranty to enroll and for full details and terms.)

Product Features:

• Full synthetic 0W-20 motor oil that is made with natural gas and designed to maximize engine protection
• Backed by a 15,000-mile protection guarantee to protect your pursuit of every mile
• Provides better fuel economy (based on the latest industry standards)
• Keeps pistons cleaner than the toughest industry standard (based on Sequence IIIH results)
• Provides unsurpassed wear protection (based on Sequence IVA wear test using SAE 5W-30)
• Formulated to provide faster low-temperature oil flow and protection in extreme heat
• Helps protect engines from loss of power
• Meets or exceeds the following OEM requirements: Chrysler MS-6395; GM dexos1 Gen. 3; Ford WSS-M2C9262-A
• Meets or exceeds the requirements of the following industry specifications: API SP, API SP-Resource Conserving, and all previous categories; ILSAC GF-6A
• For a full list of equipment approvals and recommendations, please consult your local Shell Technical Help Desk and always consult your owner’s manual
• Complete Engine Protection: Provides protection against abnormal combustion phenomena like low-speed pre-ignition in modern turbocharged gasoline direct injection (TGDI) engines, ensuring complete engine protection.