Lexus IS350 Performance Air Intake Kits

Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake comes with a red Spectre reusable low restriction air filter, polished aluminum tubing and a black powder coated heat shield to help prevent engine air from entering the intake inlet. Spectre air intakes come with the necessary boots, clamps and hardware for an OE fit and finish.

Product Features:

• DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
• BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
• IMPROVED ENGINE SOUND: Hear the power under the hood
• WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
• EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
• EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
• HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
• Will not void vehicle warranty(limited)
• Product might not be available in all states due to local laws.

The AEM 21-806C Performance Cold Air Intake System produces horsepower And torque gains by replacing your vehicle’s restrictive factory air filter And air intake housing. This air intake system was designed, tuned And dyno-tested to fit select Lexus GS350 models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration And performance. The air filter is located in the original air box space And is protected by a heat shield which is designed to reduce intake air temperature And increase horsepower. The air intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine’s factory emissions control devices including the mass air flow sensor And PCV hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools. Some AEM air intakes are not legal for sale or use in California And other states adopting California emission standards, while others are 50 state legal. View the 21-806C vehicle applications to determine the legal status for each vehicle.

The K&N 69-8704TP Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Lexus GS350 and IS350 models. The restrictive factory air filter and air intake tubing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smooths and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake for a guaranteed power gain. More air means more usable power and acceleration throughout the engine’s RPM range. The 69-8704TP air intake comes with a replacement K&N high-flow air filter and an aluminum intake tube that easily connects to your vehicle’s factory air box and throttle body. The intake tube has an attractive chrome-like finish that’s made to last and it accommodates the factory crank case vent hose. The air filter can be used for up to 50,000 miles before servicing is needed depending on driving conditions. This air intake system is designed for easy installation and requires commonly available tools to do the job. ach vehicle and air intake.

Product Features:

• Guaranteed to increase horsepower
• Designed to improve throttle response and engine sound
• Low restriction aluminum tube
• Replaces stock air filter and intake tube
• Lasts up to 100,000 miles before service is required (depending on driving conditions)
• Easy to install with commonly available tools
• Washable and reusable lifetime air filter
• K&N Million Mile Limited Warranty

Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

Product Features:

• Guaranteed to increase horsepower and torque.
• Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter.
• Engineered to provide high airflow and exceptional filtration.
• Replaces factory air filter and intake tube.
• Filter only requires cleaning every 100,000 miles under normal highway driving conditions.
• Typical installation can be completed in 60 minutes or less with simple hand tools.
• No-Hassle Lifetime Limited Warranty.
• Will not void vehicle warranty(limited)

The AEM 22-688C Performance Air Intake System is a free-flowing, mandrel-bent aluminum tube air induction system designed to replace the restrictive factory air filter And air intake tubing while retaining the factory air box on some Lexus IS 250, IS 350 And RC 350 models. The air intake system comes with a replacement AEM high-flow air filter And a free-flowing aluminum intake tube that easily connects to your vehicle’s factory air box And engine throttle body to dramatically increase air flow into your engine. With more air flowing through the custom-tuned intake tube, you experience more horsepower And acceleration throughout the engine’s RPM range. The air intake tube accommodates a breather hose And is finished with an attractive And durable gunmetal gray powder-coating that provides a clean, high-performance look under the hood. The AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before servicing is needed (depending on driving conditions). This air intake is designed for easy installation And simply requires one screwdriver And a ratchet set to do the job. The air intake system comes with AEM’s Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California And other states adopting California emission standards while others are 50 state legal. View the 22-688C vehicle applications to determine the legal status for each vehicle.

This Performance Air Intake System allows your engine to breath more air compared to the restrictive factory air intake housing. It is designed, tuned, And dyno-tested to produce more horsepower And torque. The cone-shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). A custom shaped heat shield with edge trim lining is included to keep engine bay heat from the air intake. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system is backed by AEM’s Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California And other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.

The AEM 21-759C Performance Cold Air Intake System produces horsepower And torque gains by replacing your vehicle’s restrictive factory air filter And air intake housing. This air intake system was designed, tuned And dyno-tested to fit specific Lexus IS250 And IS350 models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration And performance. The air filter is located in the original air box space And is protected by a heat shield which is designed to reduce intake air temperature And increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine’s factory emissions control devices including the mass air flow sensor And PCV hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools. Some AEM air intakes are not legal for sale or use in California And other states adopting California emission standards, while others are 50 state legal. View the 21-759C vehicle applications to determine the legal status for each vehicle.

Product Features:

• Product might not be available in all states due to local laws.