Lexus HS250H Fuel and Emissions Systems

Essential Lexus HS250H Fuel and Emissions Systems

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

Fuel Tank Cleaning Kit

from

$12.49
To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye

Product Features:
  • Helps avoid premature fuel pump failure
  • Lint free towel included
  • Low suds formulation
  • Removes harmful contaminants from the fuel tank
See More

DENSO – First Time Fit Air Fuel Ratio Sensor (Part No.C5015436963ND)

First Time Fit Air Fuel Ratio Sensor

from

$273.98
DENSO a global supplier to automakers manufactures an OE-equivalent direct fit air fuel ratio sensor that maintains the quality and performance of the Original Equipment it replaces. DENSO continues to innovate with the latest development in air fuel ratio sensors. These components, also known as wide-band oxygen sensors, have a broader response range to provide much finer control of air/fuel mixtures over a greater variety of operating conditions.

Product Features:
  • Tarnish-proof platinum electrodes provides longer life and maintains accuracy
  • Quick-response planar zirconia element can quickly detect oxygen concentration
  • Measures A/F ratios from approximately 12:1 to 19:1
  • Increased performance by mapping a/f ratios throughout rpm range
  • Reduces emissions by keeping the air-fuel mixture at an optimum ratio
See More

NTK – Switching Oxygen Sensor: 4 Wire, 14.25" Long, Heated, Direct Fit (Part No.24677)

Switching Oxygen Sensor: 4 Wire, 14.25" Long, Heated, Direct Fit

from

$116.99
NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
  • PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
  • OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
  • EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
  • EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
  • ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
  • NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
See More

Ishino Stone – Fuel Inject Cushion (Part No.C1011144709ISH)

Fuel Inject Cushion

from

$3.55
Fuel Inject Cushion

Carquest Premium – Ambient Air Temperature Sensor (Part No.WTA1121)

Ambient Air Temperature Sensor

from

$43.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17504)

Keyed Alike Locking Fuel Cap

from

$6.99
None

Product Features:
  • Protects your fuel from theft and vandalism
  • Manufactured from durable, long-life materials
  • Independently tested for emission control
  • Passes all state and federal emissions tests
  • Reduces air pollution with proper sealing and venting
See More

Carquest Premium – Gas Cap: Twist On, Reduces Air Pollution, 1 Pack (Part No.10817)

Gas Cap: Twist On, Reduces Air Pollution, 1 Pack

from

$15.79
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

DENSO – Mass Air Flow Sensor (Part No.197-6160)

Mass Air Flow Sensor

from

$169.99
DENSO’s innoviate designs reduces the size and weight which allows for easy installation. Glass film coated sensing elements reduces contamination exposure and improves reliability.

Product Features:
  • OE technology adapted for the aftermarket
  • Reduces emissions, increased performance
  • Delivers the highest reliability and detection accuracyá
See More

Carquest Premium – Mass Air Flow Sensor (MAF) – 100% NEW (Part No.MQ6225)

Mass Air Flow Sensor (MAF) - 100% NEW

from

$105.99
Advance Auto Parts is proud to carry all new mass air flow sensors that use high-quality components with the highest quality standards.

Product Features:
  • CARQUEST MAF use all new high-quality components at the highest quality standards.
  • Manufactured with new and advanced technology to perform, fit and function at OE specifications.
  • All new product that is tested with OEM equipment to OEM standards
  • Outperforms competition when tested in extreme environmental conditions
See More

NTK – Wideband Oxygen Sensor: Air-Fuel Ratio 4 Wire, 10.75" Long, Heated, Direct Fit (Part No.24833)

Wideband Oxygen Sensor: Air-Fuel Ratio 4 Wire, 10.75" Long, Heated, Direct Fit

from

$168.99
NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. While conventional switching oxygen sensors only switch rich or lean, wideband oxygen (or Air-Fuel Ratio) sensors produce a linear output signal that allows the ECU determine exactly how rich or lean an engine is running and make continuous and precise adjustments of the air-fuel mixture to stay closest to stoichiometric, providing the best possible combustion and fewest emissions. A ceramics company at our core, NTK uses state-of-the art technology enabling complete control of the ceramics used in our wideband oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
  • PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
  • OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
  • EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
  • EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
  • ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
  • NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
See More

DENSO – Wideband Oxygen Sensor: Upstream, 4 Wire, 10.83" Long, Heated, Exact Fit (Part No.234-9048)

Wideband Oxygen Sensor: Upstream, 4 Wire, 10.83" Long, Heated, Exact Fit

from

$212.99
DENSO Air/Fuel Ratio Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance.; Each component is precision-built for exact replacement+ and a first time fit.; DENSO gives you the right part and the right fit+ the first time.

Product Features:
  • Specifically designed to meet the increasing demands of today’s engines
  • 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
  • Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
  • Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
  • Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
See More

Delphi – Electric Fuel Pump and Strainer Set: 12V, With 2 Male Blade Terminals (Part No.FE0753)

Electric Fuel Pump and Strainer Set: 12V, With 2 Male Blade Terminals

from

$645.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
  • Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
  • Improved pump performance as a result of Delphi’s innovative design and durability
  • Restores fast pressure performance and system integrity, translating to better pumping through less energy
  • Part is validated, tested and matched to the right vehicle application
  • When servicing the fuel system, always check the fuel filter for possible replacement
  • Always be sure to check and clean fuel tank to avoid unnecessary returns
  • Always replace the fuel strainer when doing a fuel pump repair
See More

Delphi – Fuel Injection Pressure Regulator (Part No.FP10529)

Fuel Injection Pressure Regulator

from

$133.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:
  • Precisely manufactured internal valves, diaphragms and springs means excellent performance under all engine operating conditions
  • Quiet operation, no audible regulator noise
  • Robust diaphragm materials means longer life, improved durability and compatibility with a wide range of fuels
  • Consistent and predictable fuel pressure throughout system range of control provides great drivability
See More

Aisan – Fuel Pressure Regulator (Part No.C3000266631AIS)

Fuel Pressure Regulator

from

$62.81
The Aisan Fuel Pressure Regulator is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Corrosion resistant housing material
  • Premium diaphragm materials for longer service life
  • Internal precision components maintain stable fuel pressure and ensure adequate fuel return
  • Meets or exceeds OEM specifications
See More

Original Equipment – Original Equipment Fuel Injector (Part No.C1000253257OEA)

Original Equipment Fuel Injector

from

$129.74
The Original Equipment brand is the same OEM quality and performance of the original equipment it replaces and is supplied in a plain box, with the car manufacturer’s logo on the part. Original Equipment fuel injectors are manufactured to OE requirements that meet federal emissions and fuel economy standards, and provide exact OE fit for ease of installation.

Product Features:
  • Original Equipment Manufacturer
  • Premium internal components
  • OE Calibrated impedance
  • Fine atomized spray reduces emissions
See More

Carquest Premium – Remanufactured Fuel Injector (Part No.A212-3214)

Remanufactured Fuel Injector

from

$48.49
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features:
  • Each unit is 100% tested to OE specifications
  • Includes new O-rings and seals made of premium OE quality materials
  • Includes application specific technical bulletin, where applicable
See More

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61421)

Fuel Injection Throttle Body Mounting Gasket

from

$7.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Carquest Premium – Fuel Cap Tester Adapter (Part No.12427)

Fuel Cap Tester Adapter

from

$34.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:
  • BAR Certified adapters
  • Adapter check’s a fuel cap’s ability to hold pressure.
  • Adapters meet EPA standards for recommended fleet coverage.
  • Check adapter application chart for specific makes and models
See More

Carquest Premium – Fuel Cap Tester Adapter (Part No.12410)

Fuel Cap Tester Adapter

from

$15.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:
  • BAR Certified adapters
  • Adapter check’s a fuel cap’s ability to hold pressure.
  • Adapters meet EPA standards for recommended fleet coverage.
  • Check adapter application chart for specific makes and models
See More

Ishino Stone – Fuel Injector O Ring (Part No.C1012184287ISH)

Fuel Injector O Ring

from

$1.92
Fuel Injector O Ring

Felpro – Fuel Injector O-Ring Kit (Part No.ES 71859)

Fuel Injector O-Ring Kit

from

$4.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Carquest – Fuel Injector Seal Kit (Part No.274712)

Fuel Injector Seal Kit

from

$5.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • State-of-the-art designs that meet or exceed OE specifications
  • Top-of-the-line quality and performance
  • With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
  • BWD is a global manufacturer of original equipment and aftermarket fuel injection products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Helping You Find the Right Fuel and Emissions Systems for Your Lexus HS250H

You love your HS250H. So we’ve made it easier than ever to help you find Lexus HS250H Fuel and Emissions Systems in our online catalog. Our inventory holds 39 aftermarket and OEM Fuel and Emissions Systems for your Lexus HS250H, ranging from $1.92 to $645.99.

We offer parts from 11 brands trusted to make quality Fuel and Emissions Systems for your Lexus HS250H. Before you buy, take some time to read through customer reviews. We currently have 3,318 reviews of Lexus HS250H Fuel and Emissions Systems from previous customers. Some of the top rated parts include Locking Fuel Cap with 4.3 stars and Locking Fuel Cap: 10501, Screw On, Direct Fit, Provides Tight Seal, 1 Pack with 4.6 stars.

Find your HS250H Fuel and Emissions Systems here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Lexus HS250H part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Fuel and Emissions Systems Brands for Your Lexus HS250H

Our inventory holds Fuel and Emissions Systems for your Lexus HS250H from 11 trusted brands. You’ll find OEM and aftermarket parts from brands like Carquest Premium, Bosch, and Motorad, all of which can keep that Lexus happy.
We have Felpro parts available for your Lexus HS250H in categories like Fuel Injectors. Some of the top-rated Felpro parts in these categories are:
Fuel Injection Throttle Body Mounting Gasket
from $7.49
(3)
Fuel Injection Throttle Body Mounting Gasket
Fuel Injector Gaskets

Top-Rated Carquest Premium Fuel and Emissions Systems

Leading Carquest Premium Fuel and Emissions Systems

We carry Carquest Premium brand parts for your Lexus HS250H across several catalog categories, including Gas Caps. Some of our most reviewed Carquest Premium parts include:

FAQs for Lexus HS250H Fuel and Emissions Systems

What are the most purchased Fuel and Emissions Systems for the Lexus HS250H?

Out of 39 Fuel and Emissions Systems for the Lexus HS250H, the most popular in our inventory are:

What are the top-rated Lexus HS250H Fuel and Emissions Systems?

Top-rated Fuel and Emissions Systems for your Lexus HS250H based on customer reviews/ratings are:
Locking Fuel Cap
from $23.99
(35)
Locking Fuel Cap
“Had a check engine light and when I scanned it, calls for a new gas cap. Instead of buying oem from the dealer or just an ordinary gas cap from a part”
Locking Fuel Cap: 10501, Screw On, Direct Fit, Provides Tight Seal, 1 Pack
from $24.99
(32)
Locking Fuel Cap: 10501, Screw On, Direct Fit, Provides Tight Seal, 1 Pack
“Lost old gas cap and replaced with this one, which comes with a lock (which you don’t have to use,FYI)”