Lexus ES330 Cooling and Climate Controls

Essential Lexus ES330 Cooling and Climate Controls

Dorman – A/C Condenser Fan Assembly (Part No.R1035405346DOR)

A/C Condenser Fan Assembly

from

$167.30
Without Controller Save time, money and labor with Dorman’s A/C Condenser Fan Assembly. It comes ready to install as a complete assembly, eliminating the need to make separate purchases. Plus, our high quality engineering ensures optimal air flow and strength to prevent your vehicle from overheating. This assembly includes the fan motor, fan blade, and fan shroud. This is the fan that is controlled by the air conditioning system and not the fan that is controlled by the coolant temp thermo-fan switch. The fan motor is also available separately for some applications (see additional catalog entries in the A/C Condenser Fan Motor category for availability).

Product Features:
  • Motor, shroud and blade included
  • Plug and Play jumper harnesses included (where applicable)
  • Replacement helps sustain proper engine operation
  • Direct replacement for a proper fit every time
See More

DENSO – First Time Fit A/C Evaporators (Part No.R1130148427ND)

First Time Fit A/C Evaporators

from

$266.04
As a leader in the development of innovative evaporator technology, DENSO offers the highest grade aftermarket products for a variety of applications. Our OE experience and know-how ensure our aftermarket products provide the unmatched performance, reliability and ease of installation you expect from DENSO. Evaporator performance is essential for proper air-conditioning performance. DENSO’s evaporator configurations, tanks, fin pitch, core dimensions and materials meet OE manufacturers’ rigid specifications. All DENSO First Time Fit® evaporators pass our strict durability and function tests. Evaporator Types Available: Multitank Superslim (MS). Parallel flow single-tank. Serpentine. In 2002, DENSO introduced the thinnest evaporator of its kind. The Multitank Superslim (MS) type evaporator is only 38mm in width and uses the world’s thinnest tubes and plates, making it smaller and more lightweight than earlier evaporator designs.

Product Features:
  • Thinner – Thinner tube (1.7mm) and shorter fin height (5mm) improves heat exchange efficiency
  • High Performance – Separating the tubes and the tanks increases the tank flow path area and reduces refrigerant pressure loss
  • Light Weight – The tube’s zinc diffusion layer improves corrosion resistance, resulting in very thin tube plate thickness (0.2mm)
  • Excellent Draining Capacity – Slits on the outer fins make draining easy
  • Dependable and lightweight
  • Made to fit the first time without the need for adjustments or modifications
See More

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

from

$38.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 1 minute
See More

Carquest Premium – A/C Discharge Line Hose Assembly (Part No.T55210)

A/C Discharge Line Hose Assembly

from

$93.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
  • Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
  • Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
  • Welds and crimps meet and exceed original equipment tension specifications.
  • Manufactured to allow flexibility in the hose to conform to engine compartments.
  • O-Rings necessary for installation are included.
See More

Carquest Premium – Radiator Cap: 16 PSI (Part No.10333)

Radiator Cap: 16 PSI

from

$21.99
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:
  • Safety lever to vent coolant pressure before removal
  • Maintains proper cooling system pressure
  • Easy installation and removal
  • 100% tested to ensure proper pressure and longevity
  • Meets all OEM specifications
See More

Carquest Premium – Coolant Housing/Water Outlet (Part No.85353)

Coolant Housing/Water Outlet

from

$56.99
We are proud to offer this CARQUEST product line: CARQUEST Water Outlets. Our products are engineered and tested to provide years of trouble free operation and designed to be hassle free OE replacement part that meets and/or exceeds OE standards. Backed by over 50 years of mobile temperature control experience, fix it once and fix it right with CARQUST Water Outlets and Thermostat Housings.

Product Features:
  • Meets and/or exceeds OEM standard
  • Includes quality gasket or O-ring to ensure proper seal (where applicable)
  • Coated with corrosion and rust inhibitor
  • 100% leak tested
  • Direct-fit replacement for ease of installation
See More

AISIN – OE Replacement Water Pump (Part No.G300054487ASC)

OE Replacement Water Pump

from

$128.87
The AISIN Water Pump contains no remanufactured parts and provides optimal cooling without creating excess load to the engine. The highest quality materials are used, creating stronger body design and resistance to corrosion.

Product Features:
  • OE-Equivalent and direct fit application.
  • 100% new with no remanufactured parts.
  • Advanced technological design.
  • Carbon ceramic sealing.
  • Resistant to corrosion.
  • Optimum cooling performance and longevity.
See More

Carquest Premium – Radiator Cap: 16 PSI (Part No.10233)

Radiator Cap: 16 PSI

from

$13.99
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:
  • Maintains proper cooling system pressure
  • Easy installation and removal
  • 100% tested to ensure proper pressure and longevity
  • Meets all OEM specifications
See More

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUC1208)

HVAC Blower Motor Resistor

from

$167.99
Carquest premium direct replacement resistors are designed to match the operation and performance of the original equipment to restore the proper heating and cooling functionality.

Product Features:
  • Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
  • Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
  • Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
  • Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor
See More

Carquest Premium – Standard Thermostat: 170 Degrees (Part No.14077)

Standard Thermostat: 170 Degrees

from

$17.29
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

DENSO – First Time Fit Relay (Part No.P2020194560ND)

First Time Fit Relay

from

$25.84
An electrical relay is sort of a magical device: it takes a small electrical signal and uses it to manage a much more powerful current, permitting electrical systems to be both lighter and more dependable at the same time. DENSO has supplied quality relays to the OE automotive world for over 60 years. The very same performance and dependability are available across the replacement aftermarket with DENSO First Time Fit® relays. Engineered to meet the most stringent automaker standards for shock resistance, arcing, and thermal protection, DENSO auto relays feature the lowest return rates in the industry; that equals value for car owners and repair facilities alike

Product Features:
  • Lead-free, solderless construction prevents heat shock and arcing
  • Controlled contact force, self-adjusting air gap increase longevity of the internal parts
  • Industry-standard packaging and footprint
  • Low heat generation
  • Reduced electrical loads
  • Built to last
See More

Factory Air – Cap & Valve A/C System Seal Kit (Part No.26783)

Cap & Valve A/C System Seal Kit

from

$17.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • All the seals needed to complete the job
  • Compatible with both R12 and R134a refrigerants
  • SUV and rear air applications
  • Application specific
See More

Carquest Premium – Connector (Part No.PTA1233)

Connector

from

$26.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

KAI – A/C Condenser (Part No.CNDDPI3052)

A/C Condenser

from

$75.99
New Platinum Pro A/C Condenser, USA/Japan Built Models, 2.4/3.0/3.3 Liter V6 Engines

Product Features:
  • USA/Japan Built Models, 2.4/3.0/3.3 Liter V6 Engines, Made Of Aluminum
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Mahle – Engine Coolant Thermostat Gasket (Part No.G403117595MAH)

Engine Coolant Thermostat Gasket

from

$8.35
The Mahle Engine Coolant Thermostat Gasket is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Seals the thermostat housing and helps prevent coolant from leaking from the engine for proper engine temperature
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Carquest Premium – Ambient Air Temperature Sensor (Part No.WTA1121)

Ambient Air Temperature Sensor

from

$43.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – A/C Compressor Relay Connector (Part No.PTA1465)

A/C Compressor Relay Connector

from

$44.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Felpro – O-RING (Part No.35654)

O-RING

from

$5.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

KAI – HVA/C Heater Core (Part No.HTR010110)

HVA/C Heater Core

from

$95.99
New Standard Replacement Heater Core

Product Features:
  • Made Of Aluminum
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dorman – Help – Air Conditioning Bypass Pulley (Part No.34852)

Air Conditioning Bypass Pulley

from

$57.99
This A/C compressor bypass pulley is a cost-effective solution to allow the original equipment drive belt to be used while bypassing an inoperable A/C compressor.

Product Features:
  • Cost-effective solution – this bypass pulley retains the use of the standard drive belt after a failed A/C compressor is removed.
  • Durable components – this bypass pulley uses quality components for a long service life
  • Easy to install – uses the same mounting points as the A/C compressor
  • Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life
See More

KAI – A/C Service Valve (Part No.FTT010751)

A/C Service Valve

from

$10.99
New Standard Replacement A/C Service Cap And Valve Kit, MT2909

Product Features:
  • MT2909
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Standard – Reman Nippondenso 10S17C Compressor w/ Clutch (Part No.DW77390)

Reman Nippondenso 10S17C Compressor w/ Clutch

from

$289.99
Product Features:
  • Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function and durability
  • All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
  • All units have new seals, O-rings, gaskets and clutch bearings
  • Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life
See More

DENSO – A/C Blower Control U (Part No.R2005811278ND)

A/C Blower Control U

from

$261.41
A/C Blower Control U

Carquest Premium – A/C Suction Line Hose Assembly (Part No.T56329)

A/C Suction Line Hose Assembly

from

$64.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
  • Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
  • Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
  • Welds and crimps meet and exceed original equipment tension specifications.
  • Manufactured to allow flexibility in the hose to conform to engine compartments.
  • O-Rings necessary for installation are included.
See More

Dorman – HVAC Air Door Actuator (Part No.R2046685417DOR)

HVAC Air Door Actuator

from

$202.53
Dorman-engineered with robust materials to improve durability and performance, our HVAC Heater Blend Door Actuators restore and maintain proper functioning of the HVAC Heater Blend Door. Depending on the make and model of your vehicle, the same exact actuator could be suitable for any and all climate control blend door applications – consult Dorman’s website for specific information.

Product Features:
  • Direct replacement for a proper fit every time
  • Recommended for replacement during blend door replacement
  • High quality plastic housing and motor/circuit board included
  • Dorman’s quality testing ensures year after year of trouble-free service
See More

Helping You Find the Right Cooling and Climate Controls for Your Lexus ES330

You love your ES330. So we’ve made it easier than ever to help you find Lexus ES330 Cooling and Climate Controls in our online catalog. Our inventory holds 99 aftermarket and OEM Cooling and Climate Controls for your Lexus ES330, ranging from $1.49 to $519.99.

We offer parts from 30 brands trusted to make quality Cooling and Climate Controls for your Lexus ES330. Before you buy, take some time to read through customer reviews. We currently have 2,515 reviews of Lexus ES330 Cooling and Climate Controls from previous customers. Some of the top rated parts include Standard Thermostat: 170 Degrees with 4.7 stars and Blower Motor: Without Wheel with 4.0 stars.

Find your ES330 Cooling and Climate Controls here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Lexus ES330 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Cooling and Climate Controls Brands for Your Lexus ES330

Our inventory holds Cooling and Climate Controls for your Lexus ES330 from 30 trusted brands. You’ll find OEM and aftermarket parts from brands like Permatex, Carquest Premium, and FELPRO, all of which can keep that Lexus happy.
We have Bosch parts available for your Lexus ES330 in categories like Engine Cooling Parts. Some of the top-rated Bosch parts in these categories are:
Water Pump
from $89.56
(1)
Water Pump
Water Pumps

Top-Rated Carquest Premium Cooling and Climate Controls

Leading Carquest Premium Cooling and Climate Controls

We carry Carquest Premium brand parts for your Lexus ES330 across several catalog categories, including Engine Cooling Parts. Some of our most reviewed Carquest Premium parts include:
Radiator Cap: 16 PSI
from $13.99
(193)
Radiator Cap: 16 PSI
Coolant Reservoir Caps
Standard Thermostat: 180 Degrees
from $17.79
(75)
Standard Thermostat: 180 Degrees
Thermostats
Radiator Cap: 16 PSI
from $21.99
(41)
Radiator Cap: 16 PSI
Radiator Caps

FAQs for Lexus ES330 Cooling and Climate Controls

What are the most purchased Cooling and Climate Controls for the Lexus ES330?

Out of 99 Cooling and Climate Controls for the Lexus ES330, the most popular in our inventory are:
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
from $6.99
(288)
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
Water Pump Housing Gaskets
Engine Coolant Thermostat Seal
from $5.49
(76)
Engine Coolant Thermostat Seal
Thermostat and Water Outlet Gaskets
Cap & Valve A/C System Seal Kit
from $17.99
(29)
Cap & Valve A/C System Seal Kit
AC Line O-Rings

What are the top-rated Lexus ES330 Cooling and Climate Controls?

Top-rated Cooling and Climate Controls for your Lexus ES330 based on customer reviews/ratings are:
Standard Thermostat: 170 Degrees
from $17.29
(33)
Standard Thermostat: 170 Degrees
“The part fit perfectly and works fine. No more overheating.”
Blower Motor: Without Wheel
from $91.99
(26)
Blower Motor: Without Wheel
“Productos excelentes de buena calidad”
Engine Water Pump: New, Gasket/Seals Included
from $75.99
(13)
Engine Water Pump: New, Gasket/Seals Included
“Replaced on a 1996 Toyota Camry 2.2 engine. Great price with code entry, and as always Advance Auto Parts had it in stock! The water pump is the exac”