from

$190.53

Starter

from

$133.99

Carquest Standard starters are designed and built to meet original equipment (O.E.) specifications, while providing great value. Our starters are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. All of our Carquest Standard starters are inspected and 100% tested to ensure they are built to meet OEM fit, form and function. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:

Designed to meet OE specifications for fit, form and function
Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
Application-specific technical bulletins included where applicable
All units are 100% triple tested to ensure quality and performance
Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
Designed to meet OE specifications for fit, form and function
Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
Application-specific technical bulletins included where applicable
All units are 100% triple tested to ensure quality and performance

from

$249.57

Bosch has been a major supplier of new alternators and starters to OE vehicle manufacturers since 1913. Securing OE certification requires strict adherence to stringent precision and performance criteria. These same exacting criteria are also applied in the manufacturing of all Bosch aftermarket alternators and starters. Whether 100% remanufactured or new, Bosch Premium Alternators and Starters are quality built and 100% factory tested to ensure years of reliable performance, even under the most extreme operating conditions. That’s why they are preferred by more professional installers.

Product Features:

Built to last using the highest quality materials and the most technologically advanced manufacturing processes
Remanufactured using more new parts than any other unit
100% exhaustive multipoint quality and performance testing throughout the remanufacturing process ensures optimum starting and charging performance under all operating conditions
Every unit is full-load tested to guarantee compliance with Bosch strict performance specifications
Solenoid with 100% new terminal hardware, contact face and high temperature cap, are completely disassembled and computer performance tested for pull/hold strength
100% new long life self-lubricating brushes
Gear train all new bushings
Drive with 100% new bushings, springs, rollers, washers caps and high temperature lubrication
Gear train lubricated with OE-specified grease providing protection from – 4 0 ?F to +3 02 ?F
Commutator remachined to Bosch tight tolerances
Permanent magnets/field coils tested for field strength and shorts (replaced with new as required)
Armature continuity tested, gauged, straightened and shimmed
All electrical connections resoldered
All shaft splines and load bearing surfaces lubricated with OE high temperature grade

from

$18.50

A/C Control Relay

from

$30.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$78.99

BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

Our knock sensors are designed to respond to knock frequencies up to 1000 Hz accommodating shifts in engine knock frequency making it a more flexible sensor responding to correct engine knock over a broad range of vehicle conditions
Manufacturing processes include an automated data acquisition system to continuously monitor the sensor output to ensure that it responds with appropriate voltage output at the specified frequency range
All units are 100% tested using an accelerometer vibration test to ensure trouble-free operation
Featuring the broadest sensor coverage in the market, we meet the service professionals needs with the highest quality product every time he opens the box

from

$430.51

Denso manufactures a 100% New Alternator that is a direct fit OEM quality replacement. In 2000, DENSO introduced the world’s first SC (Segment Conductor) alternator using a rectangular conductor for its stator coil. By raising the winding density (space factor) from 45 percent to 70 percent, DENSO made the SC alternator 20 percent lighter and increased the output 50 percent higher than a conventional type. Benefits and Features:

Product Features:

OEM-Quality Direct Fit Application
Maximum output and performance
100% new quality components
Fully tested to meet OE specifications
Provides exceptional reliability
High output, high efficiency and light weight
Low magnetic noise
Small and multi-functional regulator

from

$266.98

Are you looking for a quality replacement part for your vehicle’s electrical system? Today’s remanufactured alternator is a complex combination of inner workings, and we completely remanufacture them to our own premium standard. All terminals are cleaned and replated. The slip rings are polished or replaced to maintain proper contact. The rectifier, diodes, rotor and bearings are performance tested or replaced for maximum output. All housings are cleaned and refinished and all stators are tested for integrity and recoated for corrosion prevention.

Product Features:

OE-Equivalent Direct Fit Application.
Fully tested to meet OE specifications.
Provides exceptional reliability.

from

$303.77

Bosch has been a major supplier of new alternators and starters to OE vehicle manufacturers since 1913. Securing OE certification requires strict adherence to stringent precision and performance criteria. These same exacting criteria are also applied in the manufacturing of all Bosch aftermarket alternators and starters. Whether 100% remanufactured or new, Bosch Premium Alternators and Starters are quality built and 100% factory tested to ensure years of reliable performance, even under the most extreme operating conditions. That’s why they are preferred by more professional installers.

Product Features:

Built to last using the highest quality materials and the most technologically advanced manufacturing processes
Remanufactured using more new parts than any other unit
100% exhaustive multipoint quality and performance testing throughout the remanufacturing process ensures optimum starting and charging performance under all operating conditions
Every unit is full-load tested to guarantee compliance with Bosch strict performance specifications
Voltage regulator 100% tested for OE voltage specifications (new on GM and Ford)
Rectifier 100 % tested (new on Ford)
Diodes 100% tested (replaced with new as required)
Rotor 100% performance-tested for maximum electrical output
100% new long life sealed bearings with special high load, high temperature grease
Stator 100% insulation and phase balance tested
Slip rings 100% new or remachined to +/- .05mm, the tightest tolerance in the industry
100% new long life self-lubricating brushes
100% new clutch pulleys
All terminals, insulators and hardware provided

from

$259.99

Carquest Professional alternators are 100% new units that are built to meet or exceed original equipment (O.E.) specifications. Our new alternators are engineered and built by an IATF/TS 16949 certified supplier that meets the highest standards achievable. Carquest Professional alternators are re-engineered to include improvements and enhancements (where applicable) to the OE design to extend longevity and service life. Our new alternators are built with all new components and are 100% triple tested to ensure high quality that is backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
Manufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
All new components are utilized to ensure long service life
Housings are 100% new with dimensions computer gauged and measured to ensure proper fitment
Internal electronics are upgraded for heavy duty reliability (where applicable)
Regulators and rectifiers are 100% electronically load tested for reliable charging performance
Application-specific technical bulletins included where applicable
All units are 100% triple tested to ensure quality and performance
Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
Rotors and stators are load tested and double insulated for maximum charging performance

from

$199.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Computer-Aided Design (CAD), laser scanning and 3D printing ┐ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ┐ in the connector terminal design process ensures speed-to-market and a precise connector fit guaranteed.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure confidence and product reliability, every time.

from

$117.99

The ignition switch is the main power switched distribution point in every vehicle. The ignition switch in some manner will be connected directly to the vehicle battery and then supply power out to every operating system in the vehicle that is required to be connected and disconnected from the vehicle¿s battery or power source. The ignition lock cylinder provides security requiring an ignition key to unlock the ignition switch.

Product Features:

Computer-Aided Design (CAD), laser scanning and 3D printing ¿ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ¿ in the part design process ensures speed-to-market and a precise fit guaranteed.
Computer-Aided Design (CAD), laser scanning and 3D printing ┐ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ┐ in the part design process ensures speed-to-market and a precise fit guaranteed.
Computer-Aided Design (CAD), laser scanning and 3D printing ¿ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ¿ in the connector terminal design process ensures speed-to-market and a precise connector fit guaranteed.
Computer-Aided Design (CAD), laser scanning and 3D printing ┐ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ┐ in the connector terminal design process ensures speed-to-market and a precise connector fit guaranteed.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure confidence and product reliability, every time.

from

$184.99

CARQUEST Voltage Regulators are engineered and created by an automotive charging system manufacturer designed to meet or exceed OEM specifications.

Product Features:

CARQUEST Voltage Regulators are designed to match OE fit, form and function. Fitted with critical OEM electronic components results in longer life expectancy.
CARQUEST Voltage Regulators are mechanically designed with utilization of surface mount technology, robust mechanical housing, and consistent encapsulation to protect against moistures & vibration.
CARQUEST Voltage Regulators uses surface mount technology and uniform encapsulation to protect against moistures & vibration.
CARQUEST Voltage Regulators are 100% individually tested for all product functionalities that includes the proper voltage set-point, power capabilities, and other product specifications.