from

$703.99

Our Air Command systems give customers the ability to conveniently adjust their air springs with the touch of a button thanks to our Air Command Air Compressor Kits. Our designs provide an instant air source to a vehicle air suspension system, giving users the freedom to adjust their air springs to accommodate different loads and road conditions from both inside and outside of the vehicle.

Product Features:

The Easy To Read Digital Display Is Designed So You Can See It During The Day, But It Does Not Blind You At Night
The Wireless Remote Utilizes A New Sleep Cycle And LED Display That Reduces Energy Use And Improves Battery Life
Easy Installation

from

$1043.00

Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:

Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
Provides An Instant Air Source For The Air Helper Springs Or Accessories
Dual Point Fill (Both Air Springs Fill Independently Of Each Other)

from

$739.99

MasterBshKt

from

$62.99

Rancho DuraCrush Suspension Bushing Kit has two reservoir clamps and DuraCrush suspension bushings in each kit. Bushings are Black for these universal parts.

Product Features:

Two reservoir clamps in each kit
Two DuraCrush suspension bushings in each kit
Bushings are black
Universal application
Quality part with long service life

from

$49.99

Rancho DuraCrush Suspension Bushing Kit has two reservoir clamps and DuraCrush suspension bushings in each kit. Bushings are Black for these universal parts.

Product Features:

Two reservoir clamps in each kit
Two DuraCrush suspension bushings in each kit
Bushings are black
Universal application
Quality part with long service life

from

$739.99

MasterBshKt

from

$473.99

aFe Power is proud to introduce the all new “Glide Guard” On-Board Compressor & Tank Mount. The Glide Guard comes powder-coated in a matte black finish with counter-sunk compressor & tank mounting holes for protection. Once the required aFe left side exit exhaust system (sold separately) is installed, the skid plate mounts neatly in the former factory muffler location tucking your air compressor and tank as high as possible (air compressor and tank not included). The Glide Guard is constructed out of 3/16″ thick steel to withstand extreme off-road conditions. This system bolts in utilizing factory locations and an additional 4 drilled holes with heavy-duty nut plates for a hassle-free install.

Product Features:

3/16 in. Thick Steel For Strength And Rigidity
Maximum Corrosion Protection
Counter Sunk Compressor
Factory Attachment Points

from

$689.99

aFe Control is proud to introduce the recently acquired Sway-A-Way line of High Performance replacement shock absorbers. These shocks feature all the same race winning engineering and components that have 20+ years of testing into a specifically designed kit that will bolt directly into your daily driven vehicle. This kit offers adjustable ride height and better off road damping curves without sacrificing any on road comfort or handling. These are 100% designed and built in the USA. This package is designed as a direct fit application and requires no modifications to the vehicle.

Product Features:

CNC Machined Components Made To The Strictest Tolerances
Polished Nitro Steel Shaft for Strength And Durability
Teflon Lined Steel Spherical Bearings
Multi-Seal Carrier To Ensure Zero Leakage

from

$1767.00

aFe Control is proud to introduce the recently acquired Sway-A-Way line of High Performance replacement shock absorbers. These shocks feature all the same race winning engineering and components that have 20+ years of testing into a specifically designed kit that will bolt directly into your daily driven vehicle. This kit offers adjustable ride height and better off road damping curves without sacrificing any on road comfort or handling. These are 100% designed and built in the USA. This package is designed as a direct fit application and requires no modifications to the vehicle.

Product Features:

CNC Machined Components Made To The Strictest Tolerances
Polished Nitro Steel Shaft for Strength And Durability
Teflon Lined Steel Spherical Bearings
Multi-Seal Carrier To Ensure Zero Leakage

from

$309.99

aFe’s RaceRunner front leveling coil springs raise the front of your JL from factory ride height for improved ground clearance over rough terrain, overall vehicle control and offers a level ride height. These RaceRunner coil springs perform with factory or RaceRunner series shocks.

Product Features:

Cold Formed Chrome Silicone Spring Material
Heat Treated And Preset For Constant Ride Height

from

$79.99

Shock Kit

from

$309.99

aFe’s RaceRunner front leveling coil springs raise the front of your JL approximately 2″ from factory ride height for improved ground clearance over rough terrain, overall vehicle control and offers a level ride height. These RaceRunner coil springs perform with factory or RaceRunner series shocks. Front Leveling Springs: 2″ Front Leveling Coil Springs Improve Handling and Offer More Ground Clearance Over Rough Terrain. Cold Formed Chrome Silicone Materials: Precision Designed and Manufactured Form Quality Materials For Durability and Longevity. Easy Installation: Factory Designed Configuration. No Modifications Required.

Product Features:

Cold Formed Chrome Silicone Spring Material
Heat Treated And Preset For Constant Ride Height

from

$776.99

Product Features:

ORDERING INFO:áBox 2 of 3áfor master kitáRS66114B; must orderáRS66114B-1, RS66114B-2 and RS66114B-3áfor a complete kit
COMPATIBILITY: Designed for 2-door and 4-door Jeep Wrangler JK
BUILT FOR THE TRAIL: Designed to fit up to 37-in. tires, get 4-in. of additional ground clearance and increased wheel travel for rock crawling, trail riding or on-road driving
COMPLETE SOLUTION: Kit includes front and rear progressive rate coil springs, upper and lower control arms, heavy-duty front and rear adjustable track bars, extended sway bar end links, bump stop spacers and mounting hardware
MAINTENANCE-FREE BUSHINGS: Adjustable control arms and track bars feature Rancho’s D2 high-articulation, grease-free bushings that allow the sleeve to rotate in the bushing without resistance to reduce wear
SUPERIOR PERFORMANCE: Front and rear progressive rate coil springs are specifically tuned to provide superior on-road comfort and off-road performance and complies with NHTSA FMVSS126 standards
ENGINEERED TO LAST: Brackets fabricated from high-strength, low-alloy steel for long life and bolt-on design for easy installation
REQUIREMENTS: Rancho exhaust cross over pipe (RS720003) or DynoMax exhaust cross over pipe (88347) is required for 2012-2018 models when not replacing the front driveshaft; sold separately
NOTES: Tire size varies between manufacturers; aftermarket bumpers, sliders, winches, etc. affect height
BUY WITH CONFIDENCE: Comes with Rancho’s limited warranty

from

$808.99

Product Features:

ORDERING INFO:áBox 1 of 3áfor master kitáRS66114B; must orderáRS66114B-1, RS66114B-2 and RS66114B-3áfor a complete kit
COMPATIBILITY: Designed for 2-door and 4-door Jeep Wrangler JK
BUILT FOR THE TRAIL: Designed to fit up to 37-in. tires, get 4-in. of additional ground clearance and increased wheel travel for rock crawling, trail riding or on-road driving
COMPLETE SOLUTION: Kit includes front and rear progressive rate coil springs, upper and lower control arms, heavy-duty front and rear adjustable track bars, extended sway bar end links, bump stop spacers and mounting hardware
MAINTENANCE-FREE BUSHINGS: Adjustable control arms and track bars feature Rancho’s D2 high-articulation, grease-free bushings that allow the sleeve to rotate in the bushing without resistance to reduce wear
SUPERIOR PERFORMANCE: Front and rear progressive rate coil springs are specifically tuned to provide superior on-road comfort and off-road performance and complies with NHTSA FMVSS126 standards
ENGINEERED TO LAST: Brackets fabricated from high-strength, low-alloy steel for long life and bolt-on design for easy installation
REQUIREMENTS: Rancho exhaust cross over pipe (RS720003) or DynoMax exhaust cross over pipe (88347) is required for 2012-2018 models when not replacing the front driveshaft; sold separately
NOTES: Tire size varies between manufacturers; aftermarket bumpers, sliders, winches, etc. affect height
BUY WITH CONFIDENCE: Comes with Rancho’s limited warranty

from

$1149.99

Product Features:

ORDERING INFO: Box 1 of 3 for master kit RS66125B; must order RS66125B-1, RS66125B-2 and RS66125B-3 for a complete kit
COMPATIBILITY: Designed for Jeep Wrangler JL Unlimited (excludes diesel; non-Rubicon models will net taller lift height versus Rubicon)
BUILT FOR THE TRAIL: Designed to fit up to 37-in. tires, get 4.5-in. of additional ground clearance and increased wheel travel for rock crawling, trail riding or on-road driving
COMPLETE SOLUTION: Kit includes front and rear corner-specific progressive rate coil springs, upper and lower control arms, HD front and rear adjustable track bars, extended sway bar end links, bump stop spacers and mounting hardware
MAINTENANCE-FREE BUSHINGS: Adjustable control arms and track bars feature Rancho’s D2 high-articulation, grease-free bushings that allow the sleeve to rotate in the bushing without resistance to reduce wear
SUPERIOR PERFORMANCE: Front and rear corner-specific progressive rate coil springs, specifically tuned to provide superior on-road comfort and off-road performance and complies with NHTSA FMVSS126 standards
ENGINEERED TO LAST: Brackets fabricated from high-strength, low-alloy steel for long life and bolt-on design for easy installation
REQUIREMENTS: If using Rancho RS55067 or RS999067 shocks with Dynamic Rebound Spring, aftermarket driveshaft is required for max front axle articulation; front RS55065 or RS999065 do not require an aftermarket driveshaft; sold separately
NOTES: Tire size varies between manufacturers; aftermarket bumpers, sliders, winches, etc. affect height
BUY WITH CONFIDENCE: Comes with Rancho’s limited warranty

from

$852.99

Product Features:

COMPATIBILITY: Designed for 2-door Jeep Wrangler JL (non-Rubicon models will net taller lift height versus Rubicon)
BUILT FOR THE TRAIL: Designed to fit up to 35-in. tires, get 3-in. of additional ground clearance needed for a day of rock crawling (may require trimming for 35-in. tires; aftermarket bumpers, sliders, winches, etc. affect lift height)
COMPLETE SOLUTION: Includes four Rancho RS5000X shocks, front and rear corner-specific progressive rate coil springs, bump stops, front and rear extended sway bar end links, e-brake line relocation bracket and hardware
ENHANCED CONTROL: Rancho RS5000X shocks with Dynamic Rebound Spring (DRS) technology provides additional control, reduces body roll and prevents rod overextension inside the shock
ORDERING INFO: Ships in two boxes; order RS66121BR5-1 and RS66121BR5-2 for a complete kit
SUPERIOR PERFORMANCE: Front and rear corner-specific progressive rate coil springs maintains level stance and ride while under heavy loads
ENGINEERED TO LAST: Brackets fabricated from high-strength, low-alloy steel for long life and bolt-on design for easy installation
COMPLETE PERFORMANCE UPGRADE: Transform your suspension with Rancho geometry correction bracket (RS62118B) or combine with Rancho adjustable control arms (RS66164B, RS66165B and RS66157B, RS66158B); sold separately
NOTES: Compatible with Jeep factory electronic stability system, it allows the use of OE wheels and tires (tire size varies between manufacturers)
BUY WITH CONFIDENCE: Comes with Rancho’s limited warranty

from

$408.99

Product Features:

COMPATIBILITY: Designed for 4-door Jeep Wrangler JK Unlimited
BUILT FOR THE TRAIL: Designed to fit up to 33-in. tires, get 2-in. of additional ground clearance needed for off-road driving (can accommodate 35-in. tires with trimming; aftermarket bumpers, sliders, winches, etc. affect lift height)
COMPLETE SOLUTION: Front and rear progressive rate coil springs, front bump stops, rear brake line relocation brackets and mounting hardware; shocks sold separately
SUPERIOR PERFORMANCE: Front and rear progressive rate coil springs, specifically tuned to provide superior on-road comfort and off-road performance
EASY TO INSTALL: Bolt-on installation for an easy upgrade that complies with NHTSA FMVSS126 standards
COMPLETE PERFORMANCE UPGRADE: Transform your suspension with Rancho geometry correction bracket (RS62103) or combine with Rancho adjustable control arms (RS66155B, RS66156B and RS66157B, RS66158B); sold separately
NOTES: Compatible with Jeep factory electronic stability system, it allows the use of OE wheels and tires and is designed with 33-in. tires using 17-in. wheels with 4.5-in. backspacing (tire size varies between manufacturers)
BUY WITH CONFIDENCE: Comes with Rancho’s limited warranty

from

$1024.00

Product Features:

COMPATIBILITY: Designed for 2-door Jeep Wrangler JL (non-Rubicon models will net taller lift height versus Rubicon)
BUILT FOR THE TRAIL: Designed to fit up to 35-in. tires, get 3-in. of additional ground clearance needed for a day of rock crawling (may require trimming for 35-in. tires; aftermarket bumpers, sliders, winches, etc. affect lift height)
COMPLETE SOLUTION: Includes four Rancho RS9000XL shocks, front and rear corner-specific progressive rate coil springs, bump stops, front and rear extended sway bar end links, e-brake line relocation bracket and hardware
NINE LEVELS OF ADJUSTMENT: Rancho RS9000XL shocks with nine-position easy-to-adjust knob allows customized damping control and firmness for on-road and off-road flexibility
ORDERING INFO: Ships in two boxes; order RS66121BR9-1 and RS66121BR9-2 for a complete kit
SUPERIOR PERFORMANCE: Front and rear corner-specific progressive rate coil springs maintains level stance and ride while under heavy loads
COMPLETE PERFORMANCE UPGRADE: Transform your suspension with Rancho geometry correction bracket (RS62118B) or combine with Rancho adjustable control arms (RS66164B, RS66165B and RS66157B, RS66158B); sold separately
ENGINEERED TO LAST: Brackets fabricated from high-strength, low-alloy steel for long life and bolt-on design for easy installation
NOTES: Compatible with Jeep factory electronic stability system; allows the use of OE wheels and tires (tire size varies between manufacturers)
BUY WITH CONFIDENCE: Comes with Rancho’s limited warranty

from

$769.99

Jeep wrangler jk 4-door 2 to 2.5 Inch dual rate long travel lift Kit, one boxKit Comes With front and rear black max shocks, rear track bar relocation, dual rate long travel coil springs, bump stop relocation. No lower arms, no pitman arm drop required. FMVSS126 safety compliant. Dual-rate long travel coils maintain coil in bucket at full droop, maximizes articulation, higher strength alloy over competitors prevents sagging, fractures and allows for powder coating in the oem coils for superb ride quality, individual rear spring rates left and right side same as oem.

Product Features:

Twin Tube Construction
Advanced Foam-Cell Technology
Vehicle Specific Multi-Stage Valving
Increased Fluid Capacity For MAX Heat Dissipation
360 Degree Arc-Welded End Mount And 180 Degree Directional Mounting
Chrome Plated Shaft And Sintered Iron Piston
Comes With Black Boot

from

$493.99

Product Features:

ORDERING INFO:áBox 3 of 3áfor master kitáRS66114B; must orderáRS66114B-1, RS66114B-2 and RS66114B-3áfor a complete kit
COMPATIBILITY: Designed for 2-door and 4-door Jeep Wrangler JK
BUILT FOR THE TRAIL: Designed to fit up to 37-in. tires, get 4-in. of additional ground clearance and increased wheel travel for rock crawling, trail riding or on-road driving
COMPLETE SOLUTION: Kit includes front and rear progressive rate coil springs, upper and lower control arms, heavy-duty front and rear adjustable track bars, extended sway bar end links, bump stop spacers and mounting hardware
MAINTENANCE-FREE BUSHINGS: Adjustable control arms and track bars feature Rancho’s D2 high-articulation, grease-free bushings that allow the sleeve to rotate in the bushing without resistance to reduce wear
SUPERIOR PERFORMANCE: Front and rear progressive rate coil springs are specifically tuned to provide superior on-road comfort and off-road performance and complies with NHTSA FMVSS126 standards
ENGINEERED TO LAST: Brackets fabricated from high-strength, low-alloy steel for long life and bolt-on design for easy installation
REQUIREMENTS: Rancho exhaust cross over pipe (RS720003) or DynoMax exhaust cross over pipe (88347) is required for 2012-2018 models when not replacing the front driveshaft; sold separately
NOTES: Tire size varies between manufacturers; aftermarket bumpers, sliders, winches, etc. affect height
BUY WITH CONFIDENCE: Comes with Rancho’s limited warranty

from

$503.99

Product Features:

ORDERING INFO: Box 1 of 2 for master kit RS66121BR9; must order RS66121BR9-1 and RS66121BR9-2 for a complete kit
COMPATIBILITY: Designed for 2-door Jeep Wrangler JL (non-Rubicon models will net taller lift height versus Rubicon)
BUILT FOR THE TRAIL: Designed to fit up to 35-in. tires, get 3-in. of additional ground clearance needed for a day of rock crawling (may require trimming for 35-in. tires; aftermarket bumpers, sliders, winches, etc. affect lift height)
COMPLETE SOLUTION: Includes four Rancho RS9000XL shocks, front and rear corner-specific progressive rate coil springs, bump stops, front and rear extended sway bar end links, e-brake line relocation bracket and hardware
NINE LEVELS OF ADJUSTMENT: Rancho RS9000XL shocks with nine-position easy-to-adjust knob allows customized damping control and firmness for on-road and off-road flexibility
SUPERIOR PERFORMANCE: Front and rear corner-specific progressive rate coil springs maintains level stance and ride while under heavy loads
COMPLETE PERFORMANCE UPGRADE: Transform your suspension with Rancho geometry correction bracket (RS62118B) or combine with Rancho adjustable control arms (RS66164B, RS66165B and RS66157B, RS66158B); sold separately
ENGINEERED TO LAST: Brackets fabricated from high-strength, low-alloy steel for long life and bolt-on design for easy installation
NOTES: Compatible with Jeep factory electronic stability system; allows the use of OE wheels and tires (tire size varies between manufacturers)
BUY WITH CONFIDENCE: Comes with Rancho’s limited warranty

from

$989.99

Product Features:

COMPATIBILITY: Designed for 4-door Jeep Wrangler JL Unlimited (excludes diesel; non-Rubicon models will net taller lift height versus Rubicon)
BUILT FOR THE TRAIL: Designed to fit up to 35-in. tires, get 2-in. to 3.5-in. of additional ground clearance needed for a day of rock crawling, trail riding or on-road driving (bumpers, sliders, winches, etc. affect lift height)
COMPLETE SOLUTION: Includes four Rancho RS5000X shocks, front and rear corner-specific progressive rate coil springs, bump stops, front and rear extended sway bar end links, e-brake line relocation bracket and hardware
ENHANCED CONTROL: Rancho RS5000X shocks with Dynamic Rebound Spring (DRS) technology provides additional control, reduces body roll and prevents rod overextension inside the shock
ORDERING INFO: Ships in two boxes; order RS66124BR5-1 and RS66124BR5-2 for a complete kit
SUPERIOR PERFORMANCE: Front and rear corner-specific progressive rate coil springs maintains level stance and ride while under heavy loads while brackets are fabricated from high-strength, low-alloy steel for long life
COMPLETE PERFORMANCE UPGRADE: Transform your suspension with Rancho geometry correction bracket (RS62118B) or combine with Rancho adjustable control arms (RS66164B, RS66165B and RS66157B, RS66158B); sold separately
EASY TO INSTALL: Bolt-on installation for an easy upgrade that complies with NHTSA FMVSS126 standards
NOTES: Compatible with Jeep factory electronic stability system, it allows the use of OE wheels and tires and is designed with 35-in. tires using 17-in. wheels with 4.5-in. backspacing (tire size varies between manufacturers)
BUY WITH CONFIDENCE: Comes with Rancho’s limited warranty

from

$504.99

Product Features:

ORDERING INFO: Box 1 of 2 for master kit RS66124BR5; must order RS66124BR5-1 and RS66124BR5-2 for a complete kit
COMPATIBILITY: Designed for 4-door Jeep Wrangler JL Unlimited (excludes diesel; non-Rubicon models will net taller lift height versus Rubicon)
BUILT FOR THE TRAIL: Designed to fit up to 35-in. tires, get 2-in. to 3.5-in. of additional ground clearance needed for a day of rock crawling, trail riding or on-road driving (bumpers, sliders, winches, etc. affect lift height)
COMPLETE SOLUTION: Includes four Rancho RS5000X shocks, front and rear corner-specific progressive rate coil springs, bump stops, front and rear extended sway bar end links, e-brake line relocation bracket and hardware
ENHANCED CONTROL: Rancho RS5000X shocks with Dynamic Rebound Spring (DRS) technology provides additional control, reduces body roll and prevents rod overextension inside the shock
SUPERIOR PERFORMANCE: Front and rear corner-specific progressive rate coil springs maintains level stance and ride while under heavy loads while brackets are fabricated from high-strength, low-alloy steel for long life
COMPLETE PERFORMANCE UPGRADE: Transform your suspension with Rancho geometry correction bracket (RS62118B) or combine with Rancho adjustable control arms (RS66164B, RS66165B and RS66157B, RS66158B); sold separately
EASY TO INSTALL: Bolt-on installation for an easy upgrade that complies with NHTSA FMVSS126 standards
NOTES: Compatible with Jeep factory electronic stability system, it allows the use of OE wheels and tires and is designed with 35-in. tires using 17-in. wheels with 4.5-in. backspacing (tire size varies between manufacturers)
BUY WITH CONFIDENCE: Comes with Rancho’s limited warranty

from

$566.99

Product Features:

ORDERING INFO: Box 2 of 2 for master kit RS66124BR9; must order RS66124BR9-1 and RS66124BR9-2 for a complete kit
COMPATIBILITY: Designed for 4-door Jeep Wrangler JL Unlimited (excludes diesel; non-Rubicon models will net taller lift height versus Rubicon)
BUILT FOR THE TRAIL: Designed to fit up to 35-in. tires, get 2-in. to 3.5-in. of additional ground clearance needed for a day of rock crawling, trail riding and on-road driving (bumpers, sliders, winches, etc. affect lift height)
COMPLETE SOLUTION: Includes four Rancho RS9000XL shocks, front and rear corner-specific progress rate coil springs, bump stops, front and rear extended sway bar end links, e-brake line relocation bracket and hardware
NINE LEVELS OF ADJUSTMENT: Rancho RS9000XL shocks with nine-position easy-to-adjust knob allows customized damping control and firmness for on-road and off-road flexibility while Dynamic Rebound Spring (DRS) delivers additional control
SUPERIOR PERFORMANCE: Front and rear corner-specific progressive rate coil springs maintains level stance and ride while under heavy loads while brackets are fabricated from high-strength, low-alloy steel for long life
COMPLETE PERFORMANCE UPGRADE: Transform your suspension with Rancho geometry correction bracket (RS62118B) or combine with Rancho adjustable control arms (RS66164B, RS66165B and RS66157B, RS66158B); sold separately
EASY TO INSTALL: Bolt-on installation for an easy upgrade that complies with NHTSA FMVSS126 standards
NOTES: Compatible with Jeep factory electronic stability system, it allows the use of OE wheels and tires and is designed with 35-in. tires using 17-in. wheels with 4.5-in. backspacing (tire size varies between manufacturers)
BUY WITH CONFIDENCE: Comes with Rancho’s limited warranty

from

$372.99

Product Features:

Experience the Rancho difference and uncompromising performance on- and off-road.
Designed to maintain steering integrity and geometry.
Covered by our limited warranty
Check out our website for more information about this system.