Jeep Stub Axles

Yukon Gear & Axle offers an extensive line of general replacement and high-performance axles for passenger car, truck and SUV applications. High quality alloys and the latest in heat-treating technologies provide a stronger-than-stock axle for off-road, on the street, or at the track.

Product Features:

• Fits Dana Spicer 44 in Ford F150 and Bronco and Jeep Wagoneer with drum brakes
• Outer stub
• 19 spline
• 9.72″ from end of splines to center of u-joint bore

Yukon Gear & Axle offers an extensive line of general replacement and high-performance axles for passenger car, truck and SUV applications. High quality alloys and the latest in heat-treating technologies provide a stronger-than-stock axle for off-road, on the street, or at the track.

Product Features:

• Fits Dana Spicer 44 in GM truck and Blazer and Jeep Wagoneer with disc brakes
• Outer stub
• 19 spline
• 9.94″ from end of splines to center of u-joint bore

Yukon Gear & Axle offers an extensive line of general replacement and high-performance axles for passenger car, truck and SUV applications. High quality alloys and the latest in heat-treating technologies provide a stronger-than-stock axle for off-road, on the street, or at the track.

Product Features:

• Fits Jeep Wrangler and Cherokee front with Dana Spicer 30
• Outer stub
• 27 spline
• 6.11″ from end of splines to center of u-joint bore

Yukon high-performance axles are built with high-tensile strength 4340 chromoly, use superior production methods that include cold roll formed splines, and feature advanced induction coil heat treating to create an axle of unmatched quality and durability.

Product Features:

• Fits Dana 30 differential with Warn hub conversion
• 27 spline
• Front outer axle
• Heavy duty 4340 chromoly construction
• Uses 5-760X Series u-joint
• For WARN hub conversion only

Yukon Gear & Axle offers an extensive line of general replacement and high-performance axles for passenger car, truck and SUV applications. High quality alloys and the latest in heat-treating technologies provide a stronger-than-stock axle for off-road, on the street, or at the track.

Product Features:

• 27 spline
• 8.72″ long
• Fits Dana Spicer 30 in 1977-1983 CJ5, 1977-1986 CJ7 and 1974-1977 Scout II
• Outer stub
• 5-760X U-joint size

Yukon Gear & Axle offers an extensive line of general replacement and high-performance axles for passenger car, truck and SUV applications. High quality alloys and the latest in heat-treating technologies provide a stronger-than-stock axle for off-road, on the street, or at the track.

Yukon Gear & Axle offers an extensive line of general replacement and high-performance axles for passenger car, truck and SUV applications. High quality alloys and the latest in heat-treating technologies provide a stronger-than-stock axle for off-road, on the street, or at the track.

Product Features:

• Fits Dana Spicer 44 in GM truck and Blazer and Jeep Wagoneer with disc brakes
• 4340 Chromoly
• Outer stub
• 19 spline
• 9.94″ from end of splines to center of u-joint bore

Yukon high-performance axles are built with high-tensile strength 4340 chromoly, use superior production methods that include cold roll formed splines, and feature advanced induction coil heat treating to create an axle of unmatched quality and durability.

Product Features:

• Fits Dana 30 and Dana 44 differentials
• 27 spline
• Front outer axle
• Heavy duty 4340 chromoly construction
• Uses 5-760X Series u-joint

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:

• Fits Dana Spicer 30 in Jeep CJ and Scout
• 4340 Chromoly
• Outer stub
• 27 spline
• 8.72″ from end of splines to center of u-joint bore

Yukon Gear & Axle offers an extensive line of general replacement and high-performance axles for passenger car, truck and SUV applications. High quality alloys and the latest in heat-treating technologies provide a stronger-than-stock axle for off-road, on the street, or at the track.

Product Features:

• 27 spline
• 8.72″ long
• Fits Dana Spicer 30 in 1977-1983 CJ5, 1977-1986 CJ7 and 1974-1977 Scout II
• Outer stub
• 5-260X U-joint size

Yukon high-performance axles are built with high-tensile strength 4340 chromoly, use superior production methods that include cold roll formed splines, and feature advanced induction coil heat treating to create an axle of unmatched quality and durability.

Product Features:

• Fits Dana 30 and Dana 44 differentials
• 30 spline
• Front outer axle
• Heavy duty 4340 chromoly construction
• Uses 5-760X Series u-joint

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:

• Fits Jeep Wrangler and Cherokee front with Dana Spicer 30
• 4340 Chromoly
• Outer stub
• 27 spline
• 6.11″ from end of splines to center of u-joint bore

Yukon high-performance axles are built with high-tensile strength 4340 chromoly, use superior production methods that include cold roll formed splines, and feature advanced induction coil heat treating to create an axle of unmatched quality and durability.

Product Features:

• Fits Dana 30 Dana 44 differentials
• 32 spline
• Front outer axle
• Heavy duty 4340 chromoly construction
• Uses 1350/5-716X Series u-joint

Yukon high-performance axles are built with high-tensile strength 4340 chromoly, use superior production methods that include cold roll formed splines, and feature advanced induction coil heat treating to create an axle of unmatched quality and durability.

Product Features:

• Fits Dana 30 and Dana 44 differentials
• 27 spline
• Front outer axle
• Heavy duty 4340 chromoly construction
• Uses 5-760X Series u-joint

Yukon high-performance axles are built with high-tensile strength 4340 chromoly, use superior production methods that include cold roll formed splines, and feature advanced induction coil heat treating to create an axle of unmatched quality and durability.

Product Features:

• Fits Dana 30 differential
• 32 spline
• Front outer axle
• Heavy duty 4340 chromoly construction
• Uses 5-760X Series u-joint

Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, marking compound with brush, and gasket. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.

Product Features:

• 32 spline
• 6.30″ long
• Fits Jeep JK front
• Outer stub
• 5-766 U-Joint size
• 4340 Chromoly