Jeep Patriot Vehicle Hoods

Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!

Product Features:

• Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
• Easy Install – Less than 15 Minutes! based on average install time across all parts
• No Special Tools Required
• Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
• OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
• OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
• World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
• Trilingual Install Instructions provided inside each package

STABILUS gas-charged lift supports make it easy and safe to raise and lower heavy hoods, rear hatches and tailgates by hand. Compact design, high functional comfort and integrated operating safety expand the range of applications for STABILUS products in utility vehicle design. As the world’s leading manufacturer of lift supports, STABILUS can provide exact replacements for practically any application where a lift support is used.

Product Features:

• Restores the original opening and closing speeds of your hood, hatch or trunk
• Easy-to-install
• No special tools required
• Engineered for your application
• Easy lifting and reduced closing effort
• Consistent lifting force through 50,000 cycles
• Rust-resistant piston rod extends product life
• Dynamic damping technology, available on select lift supports

Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!

Product Features:

• Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
• Easy Install – Less than 15 Minutes! based on average install time across all parts
• No Special Tools Required
• Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
• OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
• OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
• World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
• Trilingual Install Instructions provided inside each package

STABILUS gas-charged lift supports make it easy and safe to raise and lower heavy hoods, rear hatches and tailgates by hand. Compact design, high functional comfort and integrated operating safety expand the range of applications for STABILUS products in utility vehicle design. As the world’s leading manufacturer of lift supports, STABILUS can provide exact replacements for practically any application where a lift support is used.

Product Features:

• Restores the original opening and closing speeds of your hood, hatch or trunk
• Easy-to-install
• No special tools required
• Engineered for your application
• Easy lifting and reduced closing effort
• Consistent lifting force through 50,000 cycles
• Rust-resistant piston rod extends product life
• Dynamic damping technology, available on select lift supports

Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!

Product Features:

• Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
• Easy Install – Less than 15 Minutes! based on average install time across all parts
• No Special Tools Required
• Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
• OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
• OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
• World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
• Trilingual Install Instructions provided inside each package

STABILUS gas-charged lift supports make it easy and safe to raise and lower heavy hoods, rear hatches and tailgates by hand. Compact design, high functional comfort and integrated operating safety expand the range of applications for STABILUS products in utility vehicle design. As the world’s leading manufacturer of lift supports, STABILUS can provide exact replacements for practically any application where a lift support is used.

Product Features:

• Restores the original opening and closing speeds of your hood, hatch or trunk
• Easy-to-install
• No special tools required
• Engineered for your application
• Easy lifting and reduced closing effort
• Consistent lifting force through 50,000 cycles
• Rust-resistant piston rod extends product life
• Dynamic damping technology, available on select lift supports

Lift supports are pressurized cylinders that are used to support hoods, hatches and rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.

Product Features:

• Exact fit original equipment design guarantees correct fit and function
• Engineered and built to meet or exceed original equipment quality standards
• Individually tested for performance and reliability
• Hardened, nitride plated steel shaft provides optimal durability
• Rubber O-ring piston seal prevents leakage for a controlled lift and consistent performance
• Heavy gauge steel body is electrostatically painted and heat cured to OE specs
• Self-Cleaning Piston Assembly provides smooth operation and more reliable performance
• Upper bushing is manufactured with quality precision providing exact fit and promotes longer operating life
• No special installation tools required
• Consistent Performance In All Weather Conditions
• Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
• Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle

Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:

• Heavy Gauge Steel Body
• Self-Cleaning Piston Assembly
• Rubber O-Ring Piston Seal
• Non-Stick Back-Up Ring
• Hardened Nitride Plated Steel Shaft
• Engineered In USA To OE Quality Standards For Performance And Durability
• IATF 16949, ISO 9001 Certified; Passes Extensive Quality Checks And Testing
• Easy To Install In Just Minutes. No Special Tools Required.
• Exact Fit Original Equipment Design Guarantees Correct Fit And Function
• Consistent Performance In All Weather Conditions
• Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
• Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle

Hood release cable broken? This hood release cable is durably built to directly replace a worn-out or broken cable on specific vehicle years, makes and models.

Product Features:

• Direct replacement – this hood release cable is made to match the original cable on specific vehicles
• Durable construction -manufactured within strict tolerances for reliable longevity
• Cost-effective solution – comparable quality for lower cost than buying replacement at the dealership
• Trustworthy value – backed by team of engineers and quality control experts in the United States

New Economy Replacement Hood Panel

Product Features:

• Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle