Jeep J-2600 Performance and Racing Products

Essential Jeep J-2600 Performance and Racing Products

Mallory – Unilite Electronic Ignition Distributor Series 37 (Part No.3760001)

Unilite Electronic Ignition Distributor Series 37

from

$599.99
The industry standard with adjustable mechanical advance curve. Triggered by photo-optic infrared LED system. Improved combustion efficiency and economy, increased spark plug life and cold weather starting, and maintenance free operation.

Product Features:
  • Improved Combustion And Economy
  • Increased Spark Plug Life
  • Improved Cold Weather Starting
  • Maintenance Free Operation
  • Accurate Spark Timing
  • Self-Lubricating Bushings
  • Years Of Trouble-Free Service
See More

Omix – Distributor Drive Gear; 72-91 Jeep CJ/Wrangler YJ (Part No.17423.01)

Distributor Drive Gear; 72-91 Jeep CJ/Wrangler YJ

from

$48.49
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.

Product Features:
  • Distributor Mounted
  • OE Style
  • Direct Fit
See More

Omix – Tie Rod End Tube (Part No.18046.03)

Tie Rod End Tube

from

$26.49
Is your Jeep’s steering loose? Are your tires wearing in an uneven pattern? Chances are that some of your steering components are worn. Fixing them is cheaper than replacing your tires and it’s a whole lot safer too.

Product Features:
  • Steel
  • OE Style
  • Direct Fit
See More

Omix – Exhaust Manifold Kit; Right; 72-91 Jeep CJ and SJ Models (Part No.17622.10)

Exhaust Manifold Kit; Right; 72-91 Jeep CJ and SJ Models

from

$301.99
Are you smelling exhaust in your Jeep? Can you hear an exhaust leak? If so, you may have a cracked exhaust manifold. Omix-ADA offers high quality exhaust manifolds and gaskets to solve the problem.

Product Features:
  • Includes Gaskets
  • Right Side
  • OE Style
  • Direct Fit
See More

Omix – Piston Ring Set .030 3.8L/4.2L; 72-90 Jeep CJ/Wrangler YJ (Part No.17430.21)

Piston Ring Set .030 3.8L/4.2L; 72-90 Jeep CJ/Wrangler YJ

from

$111.99
Are you rebuilding an engine and need a fresh set of piston rings? Omix-ADA offers high-quality replacement piston ring sets from Standard to .080 thousandths over size. They will give you years of service and get you back on the road.

Product Features:
  • .030 Over
  • Engine Work May Be Required To Install This Part
See More

Rancho – Steering Damper Kit (Part No.RS97355)

Steering Damper Kit

from

$119.99
Designed to reduce wheel shimmy and end vibration caused by larger tires, the Rancho steering stabilizer kit cuts down on steering arm fatigue to improve handling. The kit includes one Rancho RS5000 steering stabilizer and installation brackets.

Product Features:
  • COMPATIBILITY – Designed for a variety of trucks and SUVs from Chevrolet, GMC, Ford, Dodge, Jeep, Plymouth and International
  • IMPROVED HANDLING AND PERFORMANCE – Reduces wheel shimmy, bump steer and vibration which helps minimize on-road or off-road driver fatigue
  • ACCOMMODATES LARGER TIRES – Engineered for vehicles with oversized wheels and tires.
  • ENGINEERED TO LAST – Features protective boot to shield shock rod and oil seal and 0.25-in. high-strength, low-alloy steel bracket construction for long life
  • EASY TO INSTALL – Includes one Rancho RS5000 steering stabilizer and brackets that bolt directly to factory steering linkage with included mounting hardware, no modifications needed
  • EASY TO INSTALL – Includes one Rancho RS5000 steering stabilizer and brackets that bolt directly to factory steering linkage with included mounting hardware, no modifications needed
  • RESISTS CORROSION – Durable black powder-coated and/or zinc-plated brackets resist rust and corrosion
  • PRECISION DESIGN – Brackets are CNC cut and bent to exact specifications for a perfect fit
  • BUY WITH CONFIDENCE – Comes with Rancho’s limited warranty
See More

Omix – Polished Valve Cover OMIX; 72-91 Jeep CJ/SJ Models (Part No.17401.10)

Polished Valve Cover OMIX; 72-91 Jeep CJ/SJ Models

from

$292.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.

Product Features:
  • Polished
  • Aluminum
  • Direct Fit
See More

Omix – Flywheel; 72-86 Jeep CJ. AMC360 (Part No.16912.08)

Flywheel; 72-86 Jeep CJ. AMC360

from

$373.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.

Product Features:
  • Use With AMC 360
  • OE Style
  • Direct Fit
See More

Mallory – Mallory Kit: Unil Conv: Delco: V8 (Part No.501)

Mallory Kit: Unil Conv: Delco: V8

from

$149.99
Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.

Product Features:
  • Easy Installation
  • Improved Fuel Economy
  • Reduced Maintenance
  • Accurate Timing
  • Improved Performance
  • Provides A Simple Conversion
  • No Moving Parts To Wear Out
See More

Omix – Rocker Arm Bridge; 258CI; 72-06 Jeep CJ/Wrangler YJ/TJ (Part No.17408.11)

Rocker Arm Bridge; 258CI; 72-06 Jeep CJ/Wrangler YJ/TJ

from

$6.49
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.

Product Features:
  • Metal
  • OE Style
  • Direct Fit
See More

Edelbrock – Engine Gasket Set (Head / Intake / Exhaust / Valve Cover) for AMC/Jeep (Part No.7372)

Engine Gasket Set (Head / Intake / Exhaust / Valve Cover) for AMC/Jeep

from

$179.99
The Edelbrock #7372?head gaskets provide the best sealing solution and are matched to Edelbrock cylinder heads for optimal performance. Edelbrock relies on industry leading head gasket manufactures to ensure our head gasket sets will provide the best fit

Product Features:
  • Head: 4.275″ Bore/0.045″ Thick/10.60cc Vol.
  • Intake: 1.13″x2.21″ Port/.030″ Thick
  • Exhaust: 1.80″x1.30″ Port
  • 3/16″ Valve Cover
  • Multi Piece Configuration
See More

Rugged Ridge – Engine Mount Kit; Aluminum (Part No.18390.20)

Engine Mount Kit; Aluminum

from

$174.99
Rugged Ridge Solid Motor mounts are built from 6061-T6 Aluminum with a tensile strength of 42,000 psi. Built to replace your wimpy OE rubber engine mounts to eliminate weight transfer on the trail torque loss and binding that result in excess engine movement.

Product Features:
  • Aluminum
  • Pair
See More

Omix – Engine Gasket Set; 5.9L/6.6L; 71-91 Jeep SJ (Part No.17440.08)

Engine Gasket Set; 5.9L/6.6L; 71-91 Jeep SJ

from

$175.99
Are your Jeep’s engine gaskets leaking? Or, are you rebuilding an engine and need fresh gaskets? Omix-ADA offers high-quality replacement gaskets that will give you years of service and get you back on the road.

Product Features:
  • Complete Kit
  • OE Style
  • Direct Fit
See More

Holley – Prem Street Carbs (Avengers) (Part No.0-80570)

Prem Street Carbs (Avengers)

from

$699.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.

Product Features:
  • Vibratory Polished For Good Looks
  • Optimized Street Calibration That Works Out Of The Box
  • Factory Preset Electric Choke For Easy Startups
  • Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
  • No Unnecessary Trips Back To The Parts Store
  • Limited Lifetime Warranty
  • 100% Wet-Flow Tested To Assure It Arrives Ready To Run
  • Street Ready; Out Of The Box
See More

Energy Suspension – Sway Bar Bushing Set (Part No.2.5106R)

Sway Bar Bushing Set

from

$37.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:
  • Allows Sway Bar System to Work At 100% Efficiency
  • Zerk Type Fittings
  • Allows for Periodic Greasing
  • Lasts Much Longer Than OEM Rubber Bushings
  • Handling Characteristics Improve Dramatically
See More

Edelbrock – Pushrod Set for AMC 343-401 (Part No.9637)

Pushrod Set for AMC 343-401

from

$217.99
Product Features:
  • Case-Hardened Tubing
  • Surface Hardening
  • Welded Ends
  • 0.3125 in. Diameter
  • Use with or without Hardened Steel Guideplates
See More

Earls Performance Product – Brake Bleeder Screws (Part No.280029ERL)

Brake Bleeder Screws

from

$46.99
Brake Bleeder Screws

Motive Gear – Drive Shaft Pinion Yoke (Part No.MG1310-6010)

Drive Shaft Pinion Yoke

from

$117.99


Product Features:
  • PINION YOKE
  • CAST:1310
  • U-BOLT STYLE
See More

Omix – Valve Cover Grommet (Part No.17402.05)

Valve Cover Grommet

from

$2.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • Rubber
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Oil Filter; 74-80 Jeep CJ Models (Part No.17436.11)

Oil Filter; 74-80 Jeep CJ Models

from

$24.99
Routine maintenance is important for your Jeep. Omix-ADA offers high quality replacement oil filters to keep your Jeep running well for years to come. Be nice to your Jeep and it will be nice to you.

Product Features:
  • OE Style
  • Direct Fit
See More

Omix – Timing Chain Cover; AMC V8; 72-86 Jeep CJ Models (Part No.17457.05)

Timing Chain Cover; AMC V8; 72-86 Jeep CJ Models

from

$412.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.

Product Features:
  • Metal
  • OE Style
  • Direct Fit
See More

Mallory – Unilite Ignition Module (Part No.605)

Unilite Ignition Module

from

$92.99
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:
  • Service Part
  • No Moving Parts To Wear Out
  • Self Contained Unit
  • Can Drive OEM
  • Can Drive High Performance Ignition Coils
See More

Mallory – Distributor Wiring Harness (Part No.29349)

Distributor Wiring Harness

from

$33.99


Product Features:
  • Service Part
  • Makes Connections Quick And Easy
See More

B & M – Performance Torque Converter for GM TH400, 350, & 375 Transmissions (Part No.20400)

Performance Torque Converter for GM TH400, 350, & 375 Transmissions

from

$329.99
Torque Converter – Tork Master 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost

Product Features:
  • New Precision Pump Drive Tube
  • Pressure Tested
  • Fully Balanced
  • Needle Thrust Bearing
  • New Thrust Washer
See More

B & M – Holeshot 2400 (Part No.20412)

Holeshot 2400

from

$549.99
HoleShot 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) Application: HoleShot 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) A higher than stock stall speed as delivered by the Holeshot c

Product Features:
  • Furnace Brazed Impeller
  • Steel Alloy Pump Drive Tube
  • Heavy Duty Needle Bearing
  • Between Stator and Turbine
  • Furnace Brazed Turbine
See More

Helping You Find the Right Performance and Racing Products for Your Jeep J-2600

You love your J-2600. So we’ve made it easier than ever to help you find Jeep J-2600 Performance and Racing Products in our online catalog. Our inventory holds 111 aftermarket and OEM Performance and Racing Products for your Jeep J-2600, ranging from $2.99 to $1,414.99.

We offer parts from 17 brands trusted to make quality Performance and Racing Products for your Jeep J-2600. Before you buy, take some time to read through customer reviews. We currently have 2,790 reviews of Jeep J-2600 Performance and Racing Products from previous customers. Some of the top rated parts include Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny with 4.7 stars and Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny with 3.8 stars.

Find your J-2600 Performance and Racing Products here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Jeep J-2600 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Performance and Racing Products Brands for Your Jeep J-2600

Our inventory holds Performance and Racing Products for your Jeep J-2600 from 17 trusted brands. You’ll find OEM and aftermarket parts from brands like K&N, Accel, and Mr. Gasket, all of which can keep that Jeep happy.
We have B & M parts available for your Jeep J-2600 in categories like Performance Engines. Some of the top-rated B & M parts in these categories are:
Tork Master 2400
from $373.99
(1)
Tork Master 2400
Performance Torque Converters

FAQs for Jeep J-2600 Performance and Racing Products

What are the most purchased Performance and Racing Products for the Jeep J-2600?

Out of 111 Performance and Racing Products for the Jeep J-2600, the most popular in our inventory are:
High Performance 180 Degree Thermostat for Increased Flow
from $29.99
(20)
High Performance 180 Degree Thermostat for Increased Flow
Performance Engine Coolant Thermostats
High Performance Thermostat - 160 Degree Brass & Copper
from $29.49
(12)
High Performance Thermostat – 160 Degree Brass & Copper
Performance Engine Coolant Thermostats

What are the top-rated Jeep J-2600 Performance and Racing Products?

Top-rated Performance and Racing Products for your Jeep J-2600 based on customer reviews/ratings are:
Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny
from $499.99
(45)
Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny
“very easy to install…replaced older carb this one is fresh and runs smooth … needed to do minor ajustment .. but nothing anyone couldn’t do …”
Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration
from $102.99
(5)
Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration
“Seeing the commercials on the speed channel got me thinking about my 1996 Dodge Dakota 4×4 with V-6, with a lot of miles. Needed a boost of power and”