Jeep J-100 Ignition and Tune-Up Products

Most modern electronic ignition systems require suppression style wires to preserve sensitive components. Flame-Thrower 8mm Custom fit MAGx2 wires provide enhanced RFI suppression and dual current paths for more power delivered to the spark plug. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cutting, crimping and splicing.

Product Features:

• Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
• Low 500 ohm per foot resistance.
• 8mm Silicone jacket to resist high temperatures, moisture, oil and chemicals.
• EPDM (Ethylene Propylene Diene Methylene) inner insulation for superior heat resistance and prevention of arcing and voltage leaks.
• Fiberglass reinforcing braid for added strength and flexibility.

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system or operating system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the manufacturer.

The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine¿s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

• All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
• Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
• Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
• Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

This spark plug non fouler is designed for easy installation on specified vehicles to protect spark plugs from fouling and damage. It is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this spark plug non fouler is designed for easy installation to protect spark plugs from fouling and damage on specified vehicles
• Ideal solution – this non-fouler preserves spark plug life and is a reliable replacement for an original non-fouler that has failed due to corrosion
• Durable construction – made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Product Features:

• PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
• BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees Celsius, inner insulation EPDM or silicone for best dielectric strength
• STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
• CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
• LIMITED WARRANTY: See package for details

SYLVANIA Long Life miniature bulbs provide standard performance for your car or truck’s interior and exterior auxiliary lighting. Ideal for use in your car’s back up/reverse, trunk, dome lights and more, Long Life bulbs are a direct replacement for your vehicle. Designed for durability, lower maintenance, and safety in mind.

Product Features:

• DEPENDABLE: Made from high quality materials for long-lasting durability
• EASY DIY INSTALLATION: A direct replacement for the factory bulbs in your vehicle, no modification required
• SMART MAINTENANCE: Always replace bulbs in pairs to ensure equal brightness and color
• PRO TIP: When changing your bulb, never touch the glass. Always use gloves or a clean shop towel to reduce the transfer of oils during install
• SAFETY: High-quality SYLVANIA bulbs are designed to perform to all relevant safety standards set for the lighting application
• TRUSTED BRAND: SYLVANIA is a trusted OEM automotive lighting manufacturer, with over 100 years of superior optical engineering experience

Product Features:

• Fel-Pro Oil Pan SnapUps 5/16″ bolts
• Designed to hold up the pan and gasket, for one person installation
• Engine Saver Hardware
• Unsurpassed quality you can trust
• Sold in sets of four and are reusable

The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

• All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
• Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
• Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
• Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

NGK Standard spark plugs (in the iconic NGK ‘yellow box’ packaging) are a proven OE cornerstone and technology customers have relied on for decades. Engineered specifically for OE applications, NGK Standard spark plugs provide OE quality nickel alloy reliable performance and design. NGK’s legendary high grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance, while triple gasket sealing prevents combustion gas leakage. Solid 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges. Trivalent metal plating ensures superior anti-corrosion and anti-seizing properties.

Product Features:

• ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode provides consistent performance
• RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
• NGK’s OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
• SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
• COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
• TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal

The Ignitor II provides increased starting voltage with adaptive dwell control. Ignitor Module Kits are extremely easy to install and fit into your original distributor to maintain your stock look. No additional ignition box is required keeping a clean look under the hood. Ignitors are available for most distributors that came with mechanical breaker points and will cover AUTOMOTIVE, MARINE, INDUSTRIAL and AGRICULTURE applications.

Product Features:

• Adaptive dwell maintains peak energy throughout the entire RPM range, reducing misfires while improving engine performance.
• Develops on average 4 times more available energy between 3000 and 5000 RPM, and 2 times more available plug voltage.
• Compensates for inherent electronic delay by adjusting the spark timing throughout the entire RPM range.
• Synchronized peak current and spark timing reduces heat build-up.
• Senses startup and develops more energy for quicker, easier starting.
• Pair with a Flame Thrower Canister Coil for optimal performance
• Legal in all 50 states and Canada (C.A.R.B. E.O. No. D-57-22)

The original Ignitor module is ideal for restorations. Ignitor Module Kits are extremely easy to install and fit into your original distributor to maintain your stock look. No additional ignition box is required keeping a clean look under the hood. Ignitors are available for most distributors that came with mechanical breaker points and will cover AUTOMOTIVE, MARINE, INDUSTRIAL and AGRICULTURE applications.

Product Features:

• Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
• 2:1 improvement over “points” in current fall time for increased coil output.
• Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.
• Epoxy molding makes our module impervious to dirt, oil, grease and moisture.
• Stable timing; no need for any adjustments.
• Pair with a Flame Thrower Canister Coil for optimal performance
• Legal in all 50 states and Canada (C.A.R.B. E.O. No. D-57-22)

Edelbrock part No. 22759 Max-Fire distributor for 1961-1980 Buick 215-350 V-8 engines is ready to run right out-of-the-box and are the perfect upgrade for your ignition system. They’re ideal for replacing or upgrading from a points triggered distributor. They feature precision machining for a perfect fit along with a simple three wire hook up for an easy installation with no need to run an external ignition control box. The centerless ground shaft utilizes an upper sealed roller bearing with an extra long lower bronze Oil-Lite bushing for smooth operation. The high output magnetic pickup and large paddle wheel reluctor deliver a strong trigger signal at high RPM for maximum performance. All of these features allow Max-Fire distributors to provide unrivaled voltage to the coil, ensuring that you’re getting maximum performance from your engine. We recommend a new Max-Fire coil for maximum voltage output, ensuring you get the most from your high performance engine at higher RPM’s. Each distributor includes a cap, rotor, retainer and mechanical advance curve kit.

Product Features:

• CNC machined from 6061-T6 aluminum with O-ring grooves for use in a fully machined engine block
• Cap and rotor are molded in high quality 30% glass filled polyester for durability and carbon tracking resistance
• Features brass contacts and a stainless steel rotor spring for maximum conductivity
• Hardened iron drive gear ensures long service life
• Fully adjustable mechanical and vacuum advance for increased mileage potential.

Our line of Billet Plug n¿ Play Distributors are based on a precision CNC-machined housing with an upper ball bearing to support the steel distributor shaft accurately from idle to redline rpm. These distributors feature our maintenance-free Ignitor II or III electronic ignition module to produce a strong spark and steady ignition timing.

Product Features:

• Precision CNC machined 6061-T6 billet aluminum housings are lightweight yet offer maximum strength.
• Our Billet distributors ship with Ignitor II modules factory installed.
• Each billet distributor is hand polished and buffed to a high luster.
• Tempered distributor shaft has low torsion displacement for accurate timing and extended operational life.
• Upper ball bearing and extra long oil impregnated bronze lower bushing work together to reduce friction and provide shaft and advance mechanism stability reducing high RPM vibration.

Product Features:

• SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
• Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
• 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
• EPDM inner insulation stops power-robbing voltage leaks.
• With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
• Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
• Excellent interference suppression and consistent performance
• Easy lock terminals for more convenient installation.
• Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
• Broad coverage available for most vehicles on the road today
• Include grease pack to ensure easy installation and removal

The distributor is just one piece of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

• Application matched component to ensure the system can be returned to like new condition.
• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

Set includes terminals for engines with early type (socket) and late type (HEI spark plug top) distributor caps. 90 degree boots and terminals factory installed on one end.

Product Features:

• Extra Long 8.5mm Wires So You Can Cut To Your Designed Length
• Incl. both socket-style and spark plug-style boots and terminals
• Includes Mini-Stripper-Crimper For Factory Style Crimps
• Size Includes [6] 90 Deg. Boots/Terminals
• Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
• Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately

ACDelco Professional Ignition Contact Set is a high quality aftermarket replacement component for one or more of the following vehicle systems: cooling, hvac, ignition, starting and charging, body-electrical and lighting, wiper and washer, and/or engine fuel management. This premium aftermarket set is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

• Professional, premium aftermarket replacement
• Provides the performance and dependability you expect from ACDelco
• Manufactured to meet expectations for fit, form, and function

The Ignition Contact Set is used in older vehicle applications to ground the ignition coil primary circuit and create the high secondary voltage required in the ignition process. Connected to the contact set is a condenser designed to absorb the high voltage spike created when the contact set opens.

Product Features:

• Application matched component to ensure the system can be returned to like new condition.
• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

The Ignition Contact Set is used in older vehicle applications to ground the ignition coil primary circuit and create the high secondary voltage required in the ignition process. Connected to the contact set is a condenser designed to absorb the high voltage spike created when the contact set opens.

Product Features:

• Application matched component to ensure the system can be returned to like new condition.
• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty (limited). Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Built by IATF 16949 certified manufacturers for consistent durability
• Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
• Segmented secondary bobbins to distribute high voltage and prevent shorting
• Extensive design validation testing to ensure long-lasting reliability
• 100% end-of-line tested to ensure proper performance
• Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

Universal, 12-volt coil features an oil-filled design and arc resistant alkyd top for superior performance, insulation and cooling. The internal design of this coil eliminates the need for a separate ballast resistor. This coil is specifically designed to deliver optimum performance when used with: Mallory UNILITE or magnetic breaker less ignitions Mallory HYFIRE IV electronic ignition controls, and Mallory electronic ignition conversion kits.

Product Features:

• 12 Volt Coil
• Oil-Filled Design
• Arch Resistant Alkyd Top
• Designed To Deliver Optimum Performance

Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
• 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
• Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure confidence and product reliability, every time.

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

• Manufactured From High Quality Material
• Engineered To The Specifications
• Meets The Quality Standards
• Designed For Performance And Durability
• Easy To Install