Jeep Compass Intake Manifolds
Your Jeep Compass will be happy to know that the search for the right Intake Manifolds you’ve been looking for is over! Advance Auto Parts has 1 different Intake Manifolds for your vehicle, ready for shipping or in-store pick up. The best part is, our Jeep Compass Intake Manifolds start from as little as $848.99.
When it comes to your Jeep Compass, you want parts and products from only trusted brands. Here at Advance Auto Parts, we work with only top reliable Intake Manifolds brands so you can shop with complete confidence. We’re sure you will get the right product to keep that Compass running for a long time.
Shop online, find the best price on the right product, and have it shipped right to your door. If you prefer to shop in person for the right Intake Manifolds for your Compass, visit one of our local Advance Auto Parts locations and you’ll be back on the road in no time!
Compare 10 Jeep Intake Manifolds
Holley EFI – Gen III Hemi Hi-Ram EFI Manifold (Part No.300-651BK)
from
$1550.00
The EFI fuel rails are machined for -8AN O-ring fittings with passages large enough to accommodate high fuel flow and dampen pressure pulsations in the fuel system and come standard with EFI Hi-Ram kits.
Product Features:
See More
Product Features:
- Add Even More Power to the Gen III Hemi Engine with a Holley Hi-Ram Intake Manifold
- Fits Gen III Hemi Engines w/ Large Intake Ports (1.70″ Height x 1.88″ Wide) – fits 2009-up 5.7L, 2005-2010 6.1L, 2011-up 6.4L)
- Cast Aluminum Construction w/ Natural Satin or Black Finish
- Runner Length and the Tapered Cross Section Designed to Perform Well for a Wide Range of Engine Configurations
- Includes EFI Fuel Rails w/ -8 AN O-Ring Fittings & Large Passages to Accommodate High Fuel Flow and Dampen Pressure Pulsations in the Fuel System
- Works with Gen III Hemi Injectors & Bosch EV-1 Style Injectors
- O-Ring Seal to Head – Large Retained O-rings Offer Superior Original Equipment (OE) Style Sealing & Are Easy to Replace
- Billet Oil Fill Cap – Attractive Low Profile Design
- Positive Crankcase Ventilation (PVC) Ports w/ Adapter Fittings
- Overall Height: 11.59″
- Port for OE Style Manifold Absolute Pressure (MAP) Sensor (1 or 2 Bar)
- Cast-In Pads for Adding Nitrous Nozzles
- Manifold Base – Available Separately for Custom Induction Systems
Holley EFI – Gen III Hemi Hi-Ram EFI Manifold (Part No.300-650BK)
from
$1450.00
The EFI fuel rails are machined for -8AN O-ring fittings with passages large enough to accommodate high fuel flow and dampen pressure pulsations in the fuel system and come standard with EFI Hi-Ram kits.
Product Features:
See More
Product Features:
- Add Even More Power to the Gen III Hemi Engine with a Holley Hi-Ram Intake Manifold
- Fits Gen III Hemi Engines w/ Large Intake Ports (1.70″ Height x 1.88″ Wide) – fits 2009-up 5.7L, 2005-2010 6.1L, 2011-up 6.4L)
- Cast Aluminum Construction w/ Natural Satin or Black Finish
- Runner Length and the Tapered Cross Section Designed to Perform Well for a Wide Range of Engine Configurations
- Includes EFI Fuel Rails w/ -8 AN O-Ring Fittings & Large Passages to Accommodate High Fuel Flow and Dampen Pressure Pulsations in the Fuel System
- Works with Gen III Hemi Injectors & Bosch EV-1 Style Injectors
- O-Ring Seal to Head – Large Retained O-rings Offer Superior Original Equipment (OE) Style Sealing & Are Easy to Replace
- Billet Oil Fill Cap – Attractive Low Profile Design
- Positive Crankcase Ventilation (PVC) Ports w/ Adapter Fittings
- Overall Height: 11.59″
- Port for OE Style Manifold Absolute Pressure (MAP) Sensor (1 or 2 Bar)
- Cast-In Pads for Adding Nitrous Nozzles
- Manifold Base – Available Separately for Custom Induction Systems
Holley EFI – Gen III Hemi Hi-Ram EFI Manifold (Part No.300-651)
from
$1400.00
The EFI fuel rails are machined for -8AN O-ring fittings with passages large enough to accommodate high fuel flow and dampen pressure pulsations in the fuel system and come standard with EFI Hi-Ram kits.
Product Features:
See More
Product Features:
- Billet Oil Fill Cap – Attractive Low Profile Design
- Fits Gen III Hemi Engines w/ Large Intake Ports (1.70″ Height x 1.88″ Wide) – fits 2009-up 5.7L, 2005-2010 6.1L, 2011-up 6.4L)
- Cast Aluminum Construction w/ Natural Satin or Black Finish
- Works with Gen III Hemi Injectors & Bosch EV-1 Style Injectors
- Includes EFI Fuel Rails w/ -8 AN O-Ring Fittings & Large Passages to Accommodate High Fuel Flow and Dampen Pressure Pulsations in the Fuel System
- Works with Gen III Hemi Injectors & Bosch EV-1 Style Injectors
- O-Ring Seal to Head – Large Retained O-rings Offer Superior Original Equipment (OE) Style Sealing & Are Easy to Replace
- Overall Height: 11.59″
- Runner Length and the Tapered Cross Section Designed to Perform Well for a Wide Range of Engine Configurations
- Fits Gen III Hemi Engines w/ Large Intake Ports (1.70″ Height x 1.88″ Wide) – fits 2009-up 5.7L, 2005-2010 6.1L, 2011-up 6.4L)
- Cast Aluminum Construction w/ Natural Satin or Black Finish
- Add Even More Power to the Gen III Hemi Engine with a Holley Hi-Ram Intake Manifold
- Manifold Base – Available Separately for Custom Induction Systems
Holley EFI – Gen III Hemi Hi-Ram EFI Manifold (Part No.300-650)
from
$1350.00
The Holley Hi-Ram intake manifold is for high-performance applications where induction system height is not limited. Using this Hi-Ram intake with high flowing Gen III Hemi cylinder heads has outstanding potential for naturally aspirated & forced induction applications. Aggressive, bold, race-bred styling will make bad intentions clear for drag race, muscle car, marine, off-road, sandrails, pulling trucks, track, street-rod applications and more!
Product Features:
See More
Product Features:
- Works with Gen III Hemi Injectors & Bosch EV-1 Style Injectors
- Positive Crankcase Ventilation (PVC) Ports w/ Adapter Fittings
- Manifold Base – Available Separately for Custom Induction Systems
- Runner Length and the Tapered Cross Section Designed to Perform Well for a Wide Range of Engine Configurations
- Runner Length and the Tapered Cross Section Designed to Perform Well for a Wide Range of Engine Configurations
- Cast Aluminum Construction w/ Natural Satin or Black Finish
- Includes EFI Fuel Rails w/ -8 AN O-Ring Fittings & Large Passages to Accommodate High Fuel Flow and Dampen Pressure Pulsations in the Fuel System
- Billet Oil Fill Cap – Attractive Low Profile Design
- Positive Crankcase Ventilation (PVC) Ports w/ Adapter Fittings
- Port for OE Style Manifold Absolute Pressure (MAP) Sensor (1 or 2 Bar)
- Port for OE Style Manifold Absolute Pressure (MAP) Sensor (1 or 2 Bar)
- Cast-In Pads for Adding Nitrous Nozzles
- Manifold Base – Available Separately for Custom Induction Systems
Edelbrock – Victor EFI Gen III Chrysler HEMI Intake Manifold (Part No.7179)
from
$1169.00
Edelbrock part #7179 Victor EFI intake manifold is designed for the “Eagle or WT” Chrysler 5.7L, 6.1L and 6.4L Gen III HEMI engines with fuel injection. The overall design is similar to the factory 6.1L SRT intake manifold, but with longer higher flowing runners and features relocated fuel injector bosses for improved flow and added nitrous bosses along the near vertical runners. The front inlet can accommodate the factory style 80mm throttle body or the 92mm Hellcat throttle body. In testing, the Victor EFI prototype made 25 hp over the stock intake manifold on a 6.4L engine. Manifold will clear most hoods without modifications. Required fuel rail kit #3647 available separately.
See More
Holley EFI – Gen III Hemi Hi-Ram EFI Manifold Base (Part No.300-653)
from
$1069.00
Add even more power to your Gen III Hemi engine with a Holley Hi-Ram intake manifold. This cast intake manifold has large intake ports – fits 2009-up 5.7L, 2005-2010 6.1L & 2011-up 6.4L engines.
Product Features:
See More
Product Features:
- Fits Gen III Hemi Engines w/ Large Intake Ports (1.70″ Height x 1.88″ Wide) – fits 2009-up 5.7L, 2005-2010 6.1L, 2011-up 6.4L)
- Add Even More Power to the Gen III Hemi Engine with a Holley Hi-Ram Intake Manifold
- Port for OE Style Manifold Absolute Pressure (MAP) Sensor (1 or 2 Bar)
- Runner Length and the Tapered Cross Section Designed to Perform Well for a Wide Range of Engine Configurations
- Includes EFI Fuel Rails w/ -8 AN O-Ring Fittings & Large Passages to Accommodate High Fuel Flow and Dampen Pressure Pulsations in the Fuel System
- Manifold Base – Available Separately for Custom Induction Systems
- O-Ring Seal to Head – Large Retained O-rings Offer Superior Original Equipment (OE) Style Sealing & Are Easy to Replace
- Runner Length and the Tapered Cross Section Designed to Perform Well for a Wide Range of Engine Configurations
- Billet Oil Fill Cap – Attractive Low Profile Design
- Overall Height: 11.59″
- Works with Gen III Hemi Injectors & Bosch EV-1 Style Injectors
- Cast-In Pads for Adding Nitrous Nozzles
- Manifold Base – Available Separately for Custom Induction Systems
Holley EFI – Gen III Hemi Hi-Ram EFI Manifold Base (Part No.300-653BK)
from
$1025.00
The Holley Hi-Ram intake manifold is for high-performance applications where induction system height is not limited. Using this Hi-Ram intake with high flowing Gen III Hemi cylinder heads has outstanding potential for naturally aspirated & forced induction applications. Aggressive, bold, race-bred styling will make bad intentions clear for drag race, muscle car, marine, off-road, sand rails, pulling trucks, track, street-rod applications and more.
Product Features:
See More
Product Features:
- Add Even More Power to the Gen III Hemi Engine with a Holley Hi-Ram Intake Manifold
- Fits Gen III Hemi Engines w/ Large Intake Ports (1.70″ Height x 1.88″ Wide) – fits 2009-up 5.7L, 2005-2010 6.1L, 2011-up 6.4L)
- Cast Aluminum Construction w/ Natural Satin or Black Finish
- Runner Length and the Tapered Cross Section Designed to Perform Well for a Wide Range of Engine Configurations
- Includes EFI Fuel Rails w/ -8 AN O-Ring Fittings & Large Passages to Accommodate High Fuel Flow and Dampen Pressure Pulsations in the Fuel System
- Works with Gen III Hemi Injectors & Bosch EV-1 Style Injectors
- O-Ring Seal to Head – Large Retained O-rings Offer Superior Original Equipment (OE) Style Sealing & Are Easy to Replace
- Billet Oil Fill Cap – Attractive Low Profile Design
- Positive Crankcase Ventilation (PVC) Ports w/ Adapter Fittings
- Overall Height: 11.59″
- Port for OE Style Manifold Absolute Pressure (MAP) Sensor (1 or 2 Bar)
- Cast-In Pads for Adding Nitrous Nozzles
- Manifold Base – Available Separately for Custom Induction Systems
Dorman – Intake Manifold Assembly (Part No.615-801)
from
$848.99
When the original equipment intake manifold warps, cracks or fails on certain Chrysler, Dodge and Jeep vehicles and generates an intake manifold runner control (IMRC) code, it can often be caused by a failed IMRC shaft. This Dorman OE FIX intake manifold features upgrades to the factory IMRC shaft design for a longer-lasting repair. Improvements include a redesigned IMRC shaft that’s square, not cylindrical, with the flapper secured to the shaft via a square, slot-through feature rather than the factory’s failure-prone screw-in style. This OE FIX manifold also features an additional support column at each runner location, and additional shielding to better protect the IMRC motor junction from harmful debris.
Product Features:
See More
Product Features:
- Upgraded repair – this engine intake manifold features improvements to the original equipment’s IMRC shaft and motor junction to help provide a longer-lasting repair
- Ideal solution – precision-engineered, manufactured and tested for seamless installation on specified Chrysler, Dodge and Jeep vehicles
- Stronger design – redesigned IMRC shaft is square, not cylindrical, with the flapper secured to the shaft via a square, slot-through feature rather than the factory’s failure-prone screw-in style
- Increased durability – includes an additional support column at each runner location, and additional shielding to better protect the IMRC motor junction from harmful debris
Edelbrock – Performer Small-Block Chevy 2.8L Intake Manifold (Part No.3785)
from
$379.99Product Features:
- For Idle to 5500 RPM Street-Driven Performance
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
- Ideal for Light-Duty Pickups and Passenger Cars
- Unique Design Allows Use Of 2 bbl Or 4 bbl Top
Dorman – Lower Intake Manifold (Part No.615-914)
from
$309.99
This engine intake manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It is thoroughly tested to ensure top-quality OEM construction and superior reliability.
Product Features:
See More
Product Features:
- Ideal replacement – this intake manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
- Reliable construction – tested to ensure top-quality OEM performance and durability
- Perfect fit – designed to match all specifications of the original part for convenient, trouble-free installation
- Trustworthy design – built by the industry leader in aftermarket manifolds
Find Your Jeep Compass Intake Manifolds by Year
People also search Advance Auto for these popular years of Jeep Compass parts:
