Name: Drag Linkage Hardware Kit
Brand: Omix
SKU: 18041.02
Price: 17.79 USD

from

$17.79

Is your Jeep’s steering loose? Are your tires wearing in an uneven pattern? Chances are that some of your steering components are worn. Fixing them is cheaper than replacing your tires and it’s a whole lot safer too. Omix-ADA offers high quality replaceme

Product Features:

Includes Caps; Cups; Springs And Washers
OE Style
Direct Fit
Limited 5 Year Warranty

from

$24.99

Is your Jeep’s steering loose? Are your tires wearing in an uneven pattern? Chances are that some of your steering components are worn. Fixing them is cheaper than replacing your tires and it’s a whole lot safer too. Omix-ADA offers high quality replaceme

Product Features:

Steel
OE Style
Direct Fit
Limited 5 Year Warranty

from

$401.99

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:

Metal
OE Style
Direct Fit
Limited 5 Year Warranty

from

$28.49

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:

Use With 134 F-Head
OE Style
Direct Fit
Limited 5 Year Warranty

from

$29.49

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:

Solenoid Only
OE Style
Direct Fit
Limited 5 Year Warranty

from

$2.79

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:

OE Style
Direct Fit
Limited 5 Year Warranty

from

$12.79

Is your Jeep running rough? Over time ignition parts will deteriorate. It’s easier to replace them now than to have a roadside breakdown in the future. Order high quality ignition parts from Omix-ADA to get your Jeep running smooth again.

Product Features:

12 Volt
OE Style
Direct Fit
Limited 5 Year Warranty

from

$353.99

Product Features:

Designed for Optimum Torque and Acceleration
Maximum Performance From Idle through Mid-Range
Matched To Performer Intakes PN[2131/3731]
Includes Hydraulic Lifters and Assembly Lube
Major Improvement in Throttle Response and Torque
Use For Daily Drivers/Trucks/Vans/RVs/4x4s
Take The Guesswork Out Of Camshaft Selection

from

$39.99

Having problems with your clutch? Does it slip or chatter when you let the pedal out? The clutch disc, pressure plate, or throw-out bearing are probably worn out. It’s always a good idea to replace all three at the same time. That will save you labor in t

Product Features:

For 8.5 in. Clutch
OE Style
Direct Fit
Limited 5 Year Warranty

from

$182.99

Is your water pump leaking? Over time the rubber impeller will deteriorate. It’s easier to replace it now than to have a roadside breakdown in the future. Get a high quality water pump from Omix-ADA. Keep your Jeep running cool.

Product Features:

OE Style
Direct Fit
High Quality
Efficient Cooling
Limited 5 Year Warranty

from

$4.29

Is your Jeep running rough? Over time ignition parts will deteriorate. It’s easier to replace them now than to have a roadside breakdown in the future. Order high quality ignition parts from Omix-ADA to get your Jeep running smooth again.

Product Features:

For 4.2L; 5.0L; 5.9L Or 6.6L
OE Style
Direct Fit
Limited 5 Year Warranty

from

$42.99

Is your Jeep’s steering loose? Are your tires wearing in an uneven pattern? Chances are that some of your steering components are worn. Fixing them is cheaper than replacing your tires and it’s a whole lot safer too. Omix-ADA offers high quality replaceme

Product Features:

Steel
OE Style
Direct Fit
Limited 5 Year Warranty

from

$126.99

Having problems with your clutch? Does it slip or chatter when you let the pedal out? The clutch disc, pressure plate, or throw-out bearing are probably worn out. It’s always a good idea to replace all three at the same time. That will save you labor in t

Product Features:

9.25 in.
OE Style
Direct Fit
Limited 5 Year Warranty

from

$171.99

The Edelbrock #7372?head gaskets provide the best sealing solution and are matched to Edelbrock cylinder heads for optimal performance. Edelbrock relies on industry leading head gasket manufactures to ensure our head gasket sets will provide the best fit

Product Features:

Head: 4.275″ Bore/0.045″ Thick/10.60cc Vol.
Intake: 1.13″x2.21″ Port/.030″ Thick
Exhaust: 1.80″x1.30″ Port
3/16″ Valve Cover
Multi Piece Configuration

from

$45.99

A true performance application component for cars, trucks, hot rods and racing/competition vehicles – yet designed to be also used for street vehicles. Soft-running enough to absorb vibrations for street use yet rugged for racing use. When required- a torque resistant safety interlock design is used that is comparable in strength to those too hard-running metal mounts. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal motor mounts. The popular early style mounts for General Motors vehicles are available in either zinc or chrome metal finishes. Made of Hyper-Flex performance polyurethane. Resistant to under vehicle fluids such as: oils, coolants, road contaminants, etc.

Product Features:

Gains Both Performance and Longevity
Will Handle Any and All Torque
Out Lasts Rubber

from

$76.99

Is your Jeep’s exhaust pipe bent or rusted out? Trying to pass your annual state Inspection or restore your Jeep back to stock? Omix-ADA offers high quality exhaust pipes, gaskets, and hangers to keep you on the road and trail.

Product Features:

Aluminized Steel
OE Style
Direct Fit
Limited 5 Year Warranty

from

$363.99

Starters eventually wear out over time. Does your starter spin quickly without starting the engine or make a rapid clicking noise? If so, Omix-ADA offers this direct OE replacement starter to get your motor running.

Product Features:

12 Volt
OE Style
Direct Fit
Limited 5 Year Warranty

from

$404.99

LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.

Product Features:

High Performance
Affordable
Durable 16 Gauge Material
Welds Easier
Lasts Longer
Heat Cured
High Heat Resistant

from

$504.99

Edelbrock part #7531 RPM Air-Gap AMC intake manifold is designed for 1970-91 304-401 c.i.d. V8 applications. The RPM Air-Gap intake manifold incorporate the same race-winning technology as our Victor Series competition intakes. The air-gap design features

Product Features:

Based on Performer RPM-Series with Unique Air Gap
Air Gap Cooler and Denser Mixture for More Power
Designed for 1500 to 6500 RPM Street-Driven Power
Dual-Plane High-Rise Intake w/180 deg Firing Order
Produces Incredible Top-End Horsepower
Retains Good Throttle Response and Acceleration
Includes Std Oil Fill ; PCV ; A/C Accy Bosses
Not for Exhaust-Heat Chokes – No Exhaust Crossover

from

$18.49

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:

For Use With 4 Speed Transmission
OE Style
Direct Fit
Limited 5 Year Warranty

from

$264.99

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:

Steel
OE Style
Direct Fit
Limited 5 Year Warranty

from

$48.49

Product Features:

Heavy Duty Cap and Rotor Kit
With Brass Inserts

from

$31.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
Slotted bolt holes allow for easier header installation.
Not intended for use in emission controlled vehicles.

from

$439.99

The B&M Quicksilver features a ratcheting action for positive shifts, Chrome Knob, neutral safety switch, NHRA/IHRA approved Reverse Lockout. Fits Most 3 and 4 speeds.

Product Features:

Universal Floor Mount Application
Base Trimmed For Custom Fit
Cable Operated
Quick Installation
Accurate Shifting

from

$87.99

Has your Jeep left you on the side of the road? There’s not much guessing with a fuel pump. They either work or they don’t. Omix-ADA offers high quality fuel pumps to get you going again.

Product Features: