Jeep Cherokee Towing Products

Essential Jeep Cherokee Towing Products

CURT – CLASS 3 TRAILER HITC (Part No.13395)

CLASS 3 TRAILER HITC

from

$334.99
CLASS 3 TRAILER HITC

CURT – Trailer Hitch: 2" Receiver, 5,000 LB Capacity, Installs as low as 35 Mins (Part No.13160)

Trailer Hitch: 2" Receiver, 5,000 LB Capacity, Installs as low as 35 Mins

from

$285.99
Whatever your task at hand — whether it’s launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close — CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Jeep Cherokee XJ (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5,000 lbs. GTW and 500 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 6,000 lbs. WD and 600 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2″ receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.

Product Features:
  • Rated to 5,000 lbs. gross trailer weight and 500 lbs. tongue weight
  • Compatible with weight distribution hitch (6,000 lbs. WD / 600 lbs. WDTW)
  • Engineered with a vehicle-specific design for a custom fit
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable high-gloss black powder coat finish
  • Co-cured in a rust-resistant liquid A-coat, inside and out
  • Equipped with an open-back receiver for easy cleaning
  • Made in USA (may include imported hardware)
See More

Husky Towing – Class Iii, Square Tube, 2"Receiver, 4500Lb Weight Carrying/750Lb Tongue, Cs (Part No.69646C)

Class Iii, Square Tube, 2"Receiver, 4500Lb Weight Carrying/750Lb Tongue, Cs

from

$283.99
Husky offers a full line of unique hitch models to provide a custom fit for nearly every vehicle on the road today. Husky receiver hitches are engineered and rigorously tested to SAE J684 standards for safety. Each hitch is protected inside and out with an industry leading, rust resistant finish.

Product Features:
  • Manufactured With A Vehicle Specific Design For A Custom Fit
  • Precisely-Welded For Superior Strength And Fit
  • Co Cured In A Rust Resistant Liquid Bonderite (R) Coating
  • Strengthened With A Welded, Seamless Collar
  • Open Back Receiver For Easy Cleaning
See More

Dorman – Trailer Hitch Connector (Part No.924-611)

Trailer Hitch Connector

from

$110.99
This trailer tow harness connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this trailer tow harness connector matches the appearance and function of the factory hardware on specified applications
  • Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Hopkins – LITE MATE 3-2 CONVTR (Part No.48915)

LITE MATE 3-2 CONVTR

from

$18.99
Many of today’s tow vehicles are equipped with separate brake lights and turn signals, however, the trailers we tow still use the combined taillight for brake and turn. The 48915 taillight converter is designed to combine the independent vehicle brake light and turn signal and combine them for the common-bulb trailer lights. Includes a built-in 4 flat connector.

Product Features:
  • 60 in. Long
  • Adapts Tow Vehicles Taillight System To The Trailers
  • Powers Up To 2.1 Amps Per Output
  • Double-Molded Weatherproof Design; Includes Dust Cover
  • Corrosion Resistant Terminals
  • Includes Splices And Terminal Grease
  • Complete With Splices And Circuit Tester
See More

Hopkins – 46155, 4 Flat Universal Towing Connector Kit w/converter (independent bulb turn signals) (Part No.46155)

46155, 4 Flat Universal Towing Connector Kit w/converter (independent bulb turn signals)

from

$39.99
The 46155 Universal Taillight Converter Kit has everything needed to make a vehicle equipped with independent turn signals tow ready. By including splice connectors and a circuit probe tester, this kit includes the extra tools required to complete the project.

Product Features:
  • 60 inch length
  • Electronic Taillight Converter adapts tow vehicles taillight system to the trailer’s
  • Double-molded weatherproof design
  • Includes L.E.D. circuit tester, 3 splice connectors, cable ties, dust cover, ground screw, and grease packet
  • Includes 4 wire flat extension
  • Includes vehicle side 4 flat
  • Includes dust cover and grease packet to prevent corrosion
  • Includes Dust Cover And Grease Packet To Prevent Corrosion
See More

Husky Towing – 4 Way Flat And 7 Way Round, Utilizes Oem Connectors, 2 Door Connector Protection (Part No.33059)

4 Way Flat And 7 Way Round, Utilizes Oem Connectors, 2 Door Connector Protection

from

$57.99
Husky Towing Products Offers Innovative Designs, High Quality, Custom Installation And Safe, Easy Operation. Husky Is Source For A Complete Line Of Hitches, Electrical Products And Towing Accessories.

Product Features:
  • Provides Multiple Towing Options From One Connector
  • Connects To Your Vehicle OEM Tow Package Connector
  • Exact OEM Replacement For Enhanced Fit And Maximum Weatherproofing
  • Applies To Over 18 Different Vehicle Makes Equipped With A Factory Tow Package
  • High Impact, ABS Plastic Construction
See More

Hopkins – Trailer Tail Light Converter: Protects Vehicle Electronics, Powers up to 5.0A (Part No.46255)

Trailer Tail Light Converter: Protects Vehicle Electronics, Powers up to 5.0A

from

$70.99
Many of today’s vehicles do not possess the electrical means for powering the extra voltage requirements of a trailer. Power Taillight Converters units completely isolate the tow vehicle from trailer malfunctions. Power is taken directly from the battery for isolation and brighter trailer tail lights.

Product Features:
  • For vehicles equipped with independent bulb turn signals or common bulb systems
  • Protects tow vehicle electronics from wiring shorts
  • Includes 14 ga. power lead wire, fuse & fuse assembly, splices, and cable ties
  • Powers up to 5.0 amps per output
  • Receives power directly from the battery
  • Includes vehicle side 4 flat
  • Includes dust cover and grease packet to prevent corrosion
  • Includes Dust Cover And Grease Packet To Prevent Corrosion
See More

Hopkins – Plug-and-Play Towing Wiring Kit with OEM Connectors (Part No.41155)

Plug-and-Play Towing Wiring Kit with OEM Connectors

from

$25.99
Dont splice onto your vehicles factory wiring harness. Simply plug in this Hopkins? vehicle wiring kit featuring exact OEM matching connectors for a perfect weather-tight fit. This kit includes the accessories needed to get you towing faster.

Product Features:
  • Plug-In Simple? Wiring Kit
  • Utilizes OEM Connectors For Enhanced Fit And Weatherproofing
  • Includes Vehicle Side 4 Flat
  • Corrosion Resistant Terminals
  • Impact And Corrosion Resistant
  • Includes Dust Cover And Grease Packet To Prevent Corrosion
  • Includes Step-By-Step Instructions
See More

CURT – Front Mount Hitch with 2in. Receiver (Part No.31084)

Front Mount Hitch with 2in. Receiver

from

$164.99
A CURT front trailer hitch allows you to use the front end of your vehicle for a variety of towing applications. They can be used for mounting a winch, a snow plow, a number of towing accessories and can even be used for some trailering applications. When space is limited, a front trailer hitch is commonly used to hold a cargo carrier, freeing up space inside the vehicle for extra cargo and making the rear mount receiver available to pull a trailer. At the boat ramp, your boat trailer can be hitched up to the front receiver hitch, giving you better control over the trailer as you launch. Some of the other accessories that can be used with a front tow hitch are the CURT winch mount, step pad, license plate holder, spare tire mount, skid shield and tow hooks. All CURT front trailer hitches provide a useful receiver tube to accept a 2″ x 2″ shank, and they are commonly used on trucks, vans and SUVs. This front trailer hitch is rated for 3,000 lbs. GTW and 300 lbs. TW. It also has a straight-line pull rating of 9,000 lbs. It is designed to be a custom trailer hitch for certain years of the Jeep Cherokee, Comanche and Wagoneer (to verify your vehicle compatibility, see application info). It comes with all necessary hardware for a complete installation and is backed by a limited lifetime warranty.

Product Features:
  • Rated to 3,000 lbs. gross trailer weight and 300 lbs. tongue weight
  • Compatible with a tow hook or shackle mount (9,000 lbs. straight-line pull)
  • Made with a vehicle-specific design for a custom fit
  • Provides a convenient mount for hitch accessories
  • Ideal for attaching a snow plow, cargo carrier or other front hitch mount
  • Allows for easy maneuvering of a trailer into a tight spot
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
See More

Milemarker – Winch Hydraulic Fittings (Part No.35-5020-51)

Winch Hydraulic Fittings

from

$147.99
For use with 75 Series and HI Series winches.

Product Features:
  • Winch Hydraulic Fittings
See More

Carquest Premium – Trailer Connector Kit (Part No.TCC1251)

Trailer Connector Kit

from

$78.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
See More

Carquest Premium – Trailer Connector Kit (Part No.TCC1189)

Trailer Connector Kit

from

$106.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
See More

CURT – Custom Towed-Vehicle RV Wiring Harness (Part No.58909)

Custom Towed-Vehicle RV Wiring Harness

from

$123.99
Towing your vehicle behind your RV is a great way to experience more of the adventure on your cross-country excursions. Whether you’re towing a compact car or a full-size truck, CURT has the perfect solution to help you Bring It! CURT towed-vehicle RV harnesses are a vehicle-specific, plug-and-play solution to wiring your vehicle for dinghy towing. They use original-equipment-compatible connectors to plug into your vehicle’s wiring system without any cutting, splicing or soldering required. They provide a standard 4-way flat connector to plug into the RV socket and synchronize the vehicle’s tail lights, turn signals and brake lights with the RV’s. Because each towed-vehicle RV harness has a vehicle-specific design, installation is fast and easy. This particular RV dinghy towing wiring harness is designed for specific years of the Jeep Cherokee. CURT RV harnesses are also built to provide long-lasting operation. They feature integrated block diodes that protect the vehicle’s circuits from the RV signals. They isolate the sensitive vehicle electronics, keeping them from overheating and short circuiting. Every CURT towed-vehicle RV harness comes ready to install with all necessary hardware included. They also come with a 4-way flat extension to provide plenty of length to plug into the RV socket, as well as a connector mounting bracket to mount the connector on the vehicle.

Product Features:
  • Connects a towed vehicle to an RV using a standard 4-way flat trailer plug
  • Simple plug-and-play design eliminates the need for cutting or splicing
  • Integrated block diodes isolate sensitive vehicle electronics from RV signals
  • Uses towed vehicle’s existing taillights, brake lights and turn signals
See More

Carquest Premium – Trailer Connector Kit (Part No.TCA1362)

Trailer Connector Kit

from

$55.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
See More

Carquest Premium – Trailer Connector Kit (Part No.TCC1276)

Trailer Connector Kit

from

$87.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
See More

CURT – Custom Wiring Harness (4-Way Flat Output) (Part No.55354)

Custom Wiring Harness (4-Way Flat Output)

from

$61.99
If your vehicle is not equipped with wiring for towing a trailer, CURT custom wiring is the ideal solution. A custom wiring harness — also called a T-connector — is a simple, plug-and-play electrical device that plugs into your automotive electric system and provides a standard, universal trailer wiring connection. This is done using two or more vehicle-specific, OEM-compatible connectors to plug into the taillight assembly, eliminating the need for cutting, splicing and soldering during installation. Custom wiring harnesses are made vehicle-specific, and while they are not available for all vehicles, they do offer one of the fastest, easiest and most secure ways to wire a vehicle for towing. This particular plug-in harness provides a 4-way flat connector socket and is designed to be a custom wiring harness to fit certain years of the Jeep Cherokee, including Sport (to verify your vehicle compatibility, see application info). It comes with all necessary wiring components to establish a reliable trailer wiring connection, as well as a dust cover to keep the connector clean when not in use. You have a picture in mind of your next destination — maybe it’s the boat landing at your favorite fishing spot, maybe it’s a campsite that overlooks one of nature’s masterpieces, or maybe it’s the next big jobsite. However, turning that picture into a reality takes more than just daydreaming. It takes a solid connection and the right amount of power. CURT custom wiring is made with some of the most sophisticated technology in the industry and is designed to install with ease, giving you a long-lasting electrical connection for your towing hitch setup.

Product Features:
  • Plugs into vehicle tail light assembly to provide a 4-way flat socket
  • Simple plug-and-play design eliminates the need for cutting or splicing
  • 4-way flat output connects tail lights, brake lights and turn signals
  • Equipped with tail light converter for vehicle-trailer compatibility
  • Constructed with SMT circuitry for better performance and durability
  • Dust cover included to keep connector clean when not in use
  • Backed by a limited one-year warranty
See More

Hopkins – 40974, Multi-Tow® Exact Fit OEM replacement 7 Blade and 4 Flat Towing Connector (Part No.40974)

40974, Multi-Tow® Exact Fit OEM replacement 7 Blade and 4 Flat Towing Connector

from

$41.99
Tow more than one trailer? This exact OEM replacement Multi-Tow® design features multiple towing options from one connector by providing sockets for towing both 7 blade and 4 flat trailers. This connector is Plug-In Simple!® with no cutting or splicing, saving you time by utilizing an OEM connector to create an exact fit for easy installation and maximum weatherproofing.

Product Features:
  • Multi-Tow® provides multiple towing options from one connector
  • Plug-In Simple!® Wiring Kit
  • Utilizes OEM connectors create an exact fit and maximum weatherproofing
  • Impact and corrosion resistant
  • Pre-greased terminals for added protection
  • Includes Step-By-Step Instructions
See More

Milemarker – HI12000; Hydraulic Winch (Part No.75-52000C)

HI12000; Hydraulic Winch

from

$1971.99
Mount to front of vehicle. Can be permanent or detachable. Free spooling and mechanical lock. Sealed against elements, can be used under water. Corrosion resistant. Stainless steel tie bars and fasteners. Reversible mounting. Limited warranty. Adapter sold separately, required for install.

Product Features:
  • Mounts To Front Of Vehicle
  • Can Be Permanent Or Detachable
  • Free spooling; Mechanical Lock
  • Sealed Against Elements; Can Be Used Under Water
  • Stainless Steel Tie Bars And Fasteners
  • Reversible Mounting
  • Limited Warranty
See More

Milemarker – HI9000; Hydraulic Winch (Part No.75-50085C)

HI9000; Hydraulic Winch

from

$1806.99
Mount to front of vehicle. Can be permanent or detachable. Free spooling and mechanical lock. Sealed against elements, can be used under water. Corrosion resistant. Stainless steel tie bars and fasteners. Reversible mounting. Limited warranty.

Product Features:
  • Mounts To Front Of Vehicle
  • Can Be Permanent Or Detachable
  • Free spooling; Mechanical Lock
  • Sealed Against Elements; Can Be Used Under Water
  • Stainless Steel Tie Bars And Fasteners
  • Reversible Mounting
  • Limited Warranty
See More

Helping You Find the Right Towing Products for Your Jeep Cherokee

You love your Cherokee. So we’ve made it easier than ever to help you find Jeep Cherokee Towing Products in our online catalog. Our inventory holds 34 aftermarket and OEM Towing Products for your Jeep Cherokee, ranging from $7.99 to $1,971.99.

We offer parts from 7 brands trusted to make quality Towing Products for your Jeep Cherokee. Before you buy, take some time to read through customer reviews. We currently have 11,322 reviews of Jeep Cherokee Towing Products from previous customers. Some of the top rated parts include Class III Multi-Fit Towing Hitch, 5,000 lb Gross Towing Weight, 500 lb Tongue Weight with 3.3 stars and 48035, 4 Flat Vehicle Side Towing Connector (48") with 3.6 stars.

Find your Cherokee Towing Products here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Jeep Cherokee part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Towing Products Brands for Your Jeep Cherokee

Our inventory holds Towing Products for your Jeep Cherokee from 7 trusted brands. You’ll find OEM and aftermarket parts from brands like Hopkins, CURT, and Husky, all of which can keep that Jeep happy.

Top-Rated Hopkins Towing Products

Leading Hopkins Towing Products

We carry Hopkins brand parts for your Jeep Cherokee across several catalog categories, including Trailer Wiring. Some of our most reviewed Hopkins parts include:
40955, Multi-Tow® FORD / GM 7 Blade and 4 Flat Wiring Kit
from $42.99
(20)
40955, Multi-Tow® FORD / GM 7 Blade and 4 Flat Wiring Kit
Trailer Wiring Harness

FAQs for Jeep Cherokee Towing Products

What are the most purchased Towing Products for the Jeep Cherokee?

Out of 34 Towing Products for the Jeep Cherokee, the most popular in our inventory are:
Trailer Hitch: 2" Receiver, 5,000 LB Capacity, Installs as low as 35 Mins
from $209.99
This product is not rated
Trailer Hitch: 2" Receiver, 5,000 LB Capacity, Installs as low as 35 Mins
Trailer Hitch – Class I

What are the top-rated Jeep Cherokee Towing Products?

Top-rated Towing Products for your Jeep Cherokee based on customer reviews/ratings are:
Class III Multi-Fit Towing Hitch, 5,000 lb Gross Towing Weight, 500 lb Tongue Weight
from $269.99
(60)
Class III Multi-Fit Towing Hitch, 5,000 lb Gross Towing Weight, 500 lb Tongue Weight
“Great pproduct, easy to install and will fit multiple vehicles.”
48035, 4 Flat Vehicle Side Towing Connector (48")
from $7.99
(5)
48035, 4 Flat Vehicle Side Towing Connector (48")
“Great fit”
Connector
from $99.99
(1)
Connector
“Well-made, solid materials and construction. Wire leads are adequate length for wiring in and placement of unit though 6″ more inches would have been ”