Jeep Cherokee Performance and Racing Products

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:

• Heavy Duty
• Stiffer Spring Rate Than OE
• Direct Fit
• Limited 5 Year Warranty

ACCEL high-performance 32 ounce points resist point float up to 6,500 RPM. Extra-thick contact arms prevent flexing. Large tungsten contacts provide crisp circuit-breaking for peak coil output. Phenolic rubbing blocks endure heavy spring loads.

Product Features:

• Extra Thick Contact Arms
• Large Radius Tungsten Contacts
• High Strength Phenolic Rubbing Blocks
• Prevents Points Float
• Moisture-Proof Buna-N Condenser

Has your Jeep left you on the side of the road? There’s not much guessing with a fuel pump module. They either work or they don’t. Omix-ADA offers high quality fuel pump modules to get you going again.

Product Features:

• Built To Meet Or Exceed OE Specifications
• OE Style
• Direct Fit
• Limited 5 Year Warranty

A true performance application component for cars, trucks, hot rods and racing/competition vehicles – yet designed to be also used for street vehicles. Soft-running enough to absorb vibrations for street use yet rugged for racing use. When required- a torque resistant safety interlock design is used that is comparable in strength to those too hard-running metal mounts. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal motor mounts. The popular early style mounts for General Motors vehicles are available in either zinc or chrome metal finishes. Made of Hyper-Flex performance polyurethane. Resistant to under vehicle fluids such as: oils, coolants, road contaminants, etc.

Product Features:

• Gains Both Performance and Longevity
• Will Handle Any and All Torque
• Out Lasts Rubber

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:

• Black
• Plastic
• OE Style
• Direct Fit
• Limited 5 Year Warranty

Are you rebuilding an engine and need a fresh set of piston rings? Omix-ADA offers high-quality replacement piston ring sets from Standard to .080 thousandths over size. They will give you years of service and get you back on the road.

Product Features:

• .060 Over
• Engine Work May Be Required To Install This Part
• Limited 5 Year Warranty

Unique One-Piece Sealed Housing: The smooth one-piece sealed housing with auxiliary air scoop is used to eliminate the use of multiple-piece housings and ensure the coldest air intake charge available. A urethane plug is also included if you wish to completely seal the auxiliary air scoop. High Quality Tube: This system uses a high quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. Large 5-Layer Performance Air Filter: This Momentum ST intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a massive round flange and is 8″ tall inverted top Pro 5R filter media. The Pro 5R performance air filter features 5-layers of progressively finer mesh cotton gauze oiled media and is constructed with 100% polyurethane frame for long life and multiple cleaning cycles. Premium Hardware: Premium stainless steel T-bolt clamps and a silicone coupler at the throttle body is used for strength and durability while also providing the most secure installation available. Momentum ST intakes are designed with fewer parts for a quick and simple installation.

Product Features:

• Outflows Factory Intake By Up To 28%
• High Quality One-Piece Sealed Housing with Auxiliary Air Scoop
• CAD-Designed Roto-Molded Intake Tube
• Pro 5R Oiled 5-Layer Progressively Finer Mesh Oiled Media Filter

Is your Jeep’s steering loose? Are your tires wearing in an uneven pattern? Chances are that some of your steering components are worn. Fixing them is cheaper than replacing your tires and it’s a whole lot safer too. Omix-ADA offers high quality replaceme

Product Features:

• Steel
• OE Style
• Direct Fit
• Limited 5 Year Warranty

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

• Fel-Pro performance intake manifold gaskets have been tested with virtually all aftermarket cylinder head and intake manifold combinations.
• No exhaust crossover openings or blocking shields
• Embossed steel core laminate w/coating
• Not intended for use in emission controlled vehicles.

Own a Jeep? The toughest four letter word on wheels. Are you looking for a parts source rugged enough to match your off the beaten path sense of adventure? With more than 11,000 unique part numbers from brands like Omix-ADA, Rugged Ridge, Alloy USA, Outland Automotive, ORV Suspension and Precision Gear, consider this your trail guide to the 4×4 of your dreams. A go anywhere, anytime, in any weather vehicle. Go ahead and smile, because it’s going to take a lot of courage not to be cocky when you Own a Jeep like that? Omix-ADA is more than just a parts manufacturer, they’re a community of enthusiasts dedicated to producing the finest in off-road solutions. Our products have been propelling four-wheel drive vehicles down highways, back roads and over the world’s roughest terrain for about two decades. Omix’s team of engineers have developed, tested and trail ridden many of our 11,000+ products until they were perfected for you. Omix-Ada is proud to have one of the most capable Research and Development, Engineering, and Product Design teams in the automotive aftermarket. By utilizing the latest in 3D Computer Aided Design and Finite Element Analysis, and coupling these tools with our decades of market experience, we are able to develop products that give our customers the highest value parts possible.

Product Features:

• 1982-1983 CJ5, 1982-1986 CJ7, 1982-1986 CJ8, 1984-2001 Cherokee, 1987-2006 Wrangler, 1993-1998 Grand Cherokee, Disc Brake Caliper Bleeder Screw (Front), LH or RH

Is your Jeep’s steering loose? Are your tires wearing in an uneven pattern? Chances are that some of your steering components are worn. Fixing them is cheaper than replacing your tires and it’s a whole lot safer too. Omix-ADA offers high quality replaceme

Product Features:

• Steel
• OE Style
• Direct Fit
• Limited 5 Year Warranty

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:

• Exhaust
• Sold Individually
• OE Style
• Direct Fit
• Limited 5 Year Warranty

Is your clutch chattering or slipping? Maybe you are just replacing the clutch while you have the engine or transmission out? Omix-ADA offers a Master clutch kit for your Jeep that includes the pressure plate, clutch disc, throw-out bearing, fork, and pil

Product Features:

• 10.5 in.
• OE Style
• Direct Fit
• Limited 5 Year Warranty

Is your Jeep’s exhaust pipe bent or rusted out? Trying to pass your annual state Inspection or restore your Jeep back to stock? Omix-ADA offers high quality exhaust pipes, gaskets, and hangers to keep you on the road and trail.

Product Features:

• Aluminized Steel
• OE Style
• Direct Fit
• Limited 5 Year Warranty

Is your axle’s differential making ugly noises? It could be that the pinion bearing has starved for oil or it is worn out from high mileage. The longer you wait to fix it, the more damage will be done. Omix-ADA offers new replacement pinion bearings for y

Product Features:

• Inner
• OE Style
• Direct Fit
• Limited 5 Year Warranty

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

• Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
• Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
• Not intended for use in emission controlled vehicles.

Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks black oxide coated. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:

• For Use With Cast Iron Heads
• Springs Made of Highest Quality Spring Wire
• Springs Precision Wound To Close Tolerances
• Use with Original Equipment Heads Only

The Edelbrock 1405 Performer Series 600 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1405 Performer Series 600 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “hold a tune”, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.

Product Features:

• Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
• Manual Choke
• 4 Barrel Count
• Square Bore
• Smooth Secondary Transition
• Both Timed and Full Vacuum Ports
• Includes PCV Outlet

There is a big following of AMC enthusiasts that are cruising a 401 equipped Javelin or trail blazing in a rock crawling Jeep with an inline 6-cylinder! MSD offers two Pro-Billet Distributors to deliver accurate trigger signals and are maintenance-free! This pick-up never requires adjustment and simply plugs right into an MSD Ignition Control. Just above it and under our strong race rotor is an adjustable mechanical advance assembly. The chro-moly weights of this assembly slide on nylon bushings producing smooth movement of the timing. You can easily adjust the curve to match your engine’s requirements with the supplied springs and stop bushings. Each precision CNC-machined billet aluminum housing features a sealed ball-bearing and long sintered bushing for stability at any rpm and increased endurance. An oversized steel shaft receives a QPQ coating to reduce friction and prevent corrosion. Both distributors are supplied with a high quality cap, rotor and gear. There is even a vacuum advance canister for street cruising economy!

Product Features:

• Designed For Street/Performance Use w/Mech or Vacuum Advance
• Must Be Used w/An MSD Ignition Control
• Supplied w/Socket Style Distributor Cap And Rotor
• Nylon pads ensure smooth operation of the advance weights
• Advance weight pins are staked and tig welded to the plate
• Mech. advance assem. can be locked out for crank trigger systems
• Advance plate and weights are fine blanked from chrome moly steel
• QPQ coated for friction reduction

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:

• Use With AMC 360
• OE Style
• Direct Fit
• Limited 5 Year Warranty

All kits consist of matched ACCEL custom fit wire set, ACCEL distributor cap and rotor and get the ACCEL U-Groove spark plugs, free. Kits include 8mm custom fit extreme 9000 wire set with heat reflective coat sparkplug boots rated at 1200 degrees Fahrenhe

Product Features:

• Complete Super Tune Kit
• 8mm Spiral Core Wires
• Accel Classic Core Plugs
• High Performance Cap And Rotor
• Reduced Emissions

Designed by a dedicated team of Jeep enthusiasts, the ORV suspension program is one of the most complete programs available. We have looked at each application in detail to provide the very best and most complete solution for your specific Jeep model. Sin

Product Features:

• Black Powder Coated
• 3 in. Lift
• Smooth Ride
• Direct Fit
• Limited 5 Year Warranty

For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:

• Maintains Better Alignment While Driving
• Full Floating and Non Binding
• Fits Into the Remaining Stock Control Arms

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:

• Left Or Right
• OE Style
• Direct Fit
• Limited 5 Year Warranty

Made of superior Hyper-Flex material. Saves replacing again and again, lasting 3 to 10 times longer. Assemble to chassis the same way as OEM isolators and do not adversely change ride characteristics.

Product Features:

• Made of Superior Hyper-Flex+ Material
• Lasts from 3 to 10 Times Longer
• Assemble to Chassis Same Way as OEM
• Maintains Factory Ride Characteristics
• Simple Way to Increase Vehicle Height