Jeep 475 Parts

Name: Premium Molded Coolant Hose
Brand: Gates
SKU: 20993
Price: 49.99 USD

Jeep 475 Belts and Hoses

from

$49.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Materials specially designed to resist collapse in a vacuum
Designed to resist electrochemical degradation, which is the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM Tube; synthetic fiber knit reinforcement; EPDM cover resistant to heat, ozone and chemical refrigerants
Meets the requirements of SAE 20R4, Class D2 and DIN 73411, Class A (except for tolerances)
Temperature range -40 degrees F to +257 degrees F (-40 degrees C to +125 degrees C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$25.49

Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.

Product Features:

Improved sealing surface for improved leak resistance
High flexibility for easy installation
Maximum vehicle coverage with minimum inventory
Heat, oil and ozone resistant
Rated for SAE 20R5 Class D-2 performance
Temperature Range: up to +257 Deg. F (+125 Deg. C)
Note: Gates recommends replacing clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transportation applications.

from

$18.79

Improved sealing surface for improved leak resistance
High flexibility for easy installation
Maximum vehicle coverage with minimal inventory
Resistant to heat, oil and ozone
Rated for SAE 20R5 Class D-2 performance
Temperature range: up to +257 degrees Celsius. F (+125 Deg. C)
Note: Gates recommends replacing clamps and connectors each time a new radiator hose is installed.
Caution: Do not use for fuel or oil transfer applications

from

$31.99

Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:

The fiber-filled rubber adds flexibility along the entire length of the belt and provides greater lateral stability in the pulley.
Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
Resists oil, heat, ozone, weather, and decay to improve belt life
Meets or exceeds SAE J636C specifications

from

$31.99

Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.

Product Features:

Molded notches reduce bending stress, especially on small-diameter pulleys, while dissipating heat.
High modulus, high strength tensile cord
Oil and heat resistant construction
Meets SAE J636b and SAE J637 specifications
Meets RMA standards for oil and heat resistance and static conductivity requirements
NOTE: Some sizes are available as Gates PowerBand V-Belts

Jeep 475 Suspension Parts

from

$15.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Grade 5 or higher bolt
Bushing included
No Squeak
Reduces vibration

from

$32.99

Rubber or Heat Treated bushings
No Squeak
Reduces vibration

from

$6.99

Rubber or Heat Treated bushings
No Squeak
Reduces vibration

from

$13.99

Rubber or Heat Treated bushings
No Squeak
Reduces vibration

from

$13.99

SPRING BSHG.

Jeep 475 Transmission Parts

from

$33.99

Product Features:

BUILT TO LAST: Advanced heat treatment process for strength
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$3.29

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: springless; single-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$8.79

Design type: springless; single-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$15.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$25.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission cooler reinstallation kit
Contains part numbers 248001, 226201, 240250 and 4 hose clamps
Provides all hardware for reinstallation of Imperial transmission coolers
Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
Made of high grade nylon for easy installation
Removable buttons for cooler/fan relocation
Made for both transmission coolers and electric fan installation
Comes with Quick Connect coupler

from

$10.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$10.49

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$23.49

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$6.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$37.99

Product Features:

BUILT TO LAST: Advanced heat treatment process for strength
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$40.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 3/4″ x 5″ x 12-1/2″
Sub-compact to compact cars
GVWR up to 12,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$83.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
Up to Class C motorhomes, towing up to 5,000 pounds
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$80.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Rapid-Cool plate and fin transmission cooler
Size: 3/4″ x 11″ x 9-1/2″
Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
GVWR up to 24,000 lbs.; towing up to 5,000 lbs.
33% more efficient than a comparable tube and fin design
Compatible with OEM cooler systems
Made with the highest quality materials
100% pressure testing to 150 PSI for quality assurance
33% more efficient than a comparable tube and fin design

from

$52.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Mid-size and full-size cars, pickups
GVWR up to 18,000 lbs.; towing up to 3,500 lbs
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$67.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 12-1/2″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$21.49

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$6.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

Looking for the best Jeep 475 aftermarket replacement parts? Replacing worn and broken parts on your Jeep 475? Check out our online catalog to find the best selection of aftermarket Jeep 475 parts as well as real user reviews on Jeep 475 replacement parts. Make an informed decision about every component you add to your 475.

At Advance Auto, we’ve got you covered when it comes to getting your Jeep 475 in tip top condition. We’ve got over 158 Jeep 475 parts to choose from in popular categories like Belts and Hoses, Suspension Parts and Body Parts. If you’re looking for the best prices, try searching our Jeep 475 parts catalog to compare OEM and aftermarket parts for your Jeep 475.

Whether you need Jeep 475 body parts, interior components, or custom Jeep 475 parts you can find them online at Advance Auto. Want to order your Transmission Parts online? Or maybe you need your Jeep Interior Products same day? No problem, you can pick up 475 parts in person at locations across the country, or have them delivered to straight to your door after ordering online. Finding a great deal on new and used Jeep 475 parts has never been easier.

Advance Auto customers frequently search for the following types of Jeep 475 auto parts. Check out customer reviews and ratings, and compare prices on the following Jeep 475 parts:

People also search Advance Auto for these popular years of the Jeep 475:

Jeep 475 Parts

Top Jeep 475 Parts Categories

Jeep 475 Belts and Hoses

Gates – Premium Molded Coolant Hose (Part No.20993)

Gates – Vulco-Flex II Flexible Coolant Hose (Part No.25480)

Gates – Vulco-Flex II Flexible Coolant Hose (Part No.25478)

Gates – Automotive XL High Capacity V-Belt (Part No.9480)

Gates – Green Stripe Truck & Bus Series V-Belt (Part No.TR22425)

Jeep 475 Suspension Parts

Rare Parts – Spring Bolt (Part No.RP35165)

Rare Parts – Spring Bushing (Part No.RP35191)

Rare Parts – Shackle Bushing (Part No.RP35320)

Rare Parts – Shackle Bushing (Part No.RP35324)

Rare Parts – SPRING BSHG. (Part No.RP35954)

Jeep 475 Transmission Parts

National – Multi-Purpose Bearing (Part No.207-L)

National – Multi-Purpose Seal (Part No.240698)

National – Multi-Purpose Seal (Part No.340797)

National – Multi-Purpose Seal (Part No.472635)

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

National – Multi-Purpose Seal (Part No.8160S)

Driveworks – Oil Seal (Part No.S-5778)

National – Differential Pinion Seal (Part No.5778)

Driveworks – Taper Bearing Cup (Part No.S-15245)

National – Multi-Purpose Bearing (Part No.307)

Imperial – Econo-Kool Transmission Oil Cooler (Part No.242009)

Imperial – High Performance Transmission Oil Cooler (Part No.240514)

Imperial – Plate and Fin Style Transmission Cooler, Heavy Duty, 3/4" x 9-1/2" x 11" (Part No.243008)

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242012)

Imperial – High Performance Transmission Oil Cooler (Part No.240512)

National – Bearing Race (Part No.18520)

National – Multi-Purpose Seal (Part No.471466)

Search Over 158 Jeep 475 Parts Online for Delivery or Pick Up

Popular Types of Parts for Jeep 475

Find Parts for Your Jeep 475 by Year

More Popular Parts for All Makes