Jaguar XK8 Motor Oil

FRAM Engine Oil SAE 5W-20 utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-20 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:

• Low-speed pre-ignition control
• Chain wear protection
• Piston cleanliness
• Turbo-compatibility
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.
• Reliable engine protection: FRAM Conventional Oil 5W20 5 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.

Castrol EDGE High Mileage 5W-20 is an advanced full synthetic motor oil that is specifically designed for vehicles with over 75,000 miles. It’s been engineered to reduce leaks, burnoff and power robbing deposits, but also contains a proprietary additive to protect the emission system. Our Phosphorus Replacement Technology reduces harmful phosphorus to protect the catalytic converter and extend maximum performance. It is the natural choice for drivers who demand maximum performance from their high mileage car.

Product Features:

• Phosphorus Replacement Technology to help extend the life of the emission system
• Reduces leaks, oil burnoff and power robbing deposits
• 15,000 miles between oil changes (1)
• (1) Or one year, whichever comes first
• Meets or exceeds the following specifications:
• API SP/SN PLUS/SN/SM
• ILSAC GF-6
• Porsche A40
• Meets engine test requirements of Chrysler MS 6395
• Meets Ford WSS-M2C960-A1

Castrol GTX High Mileage 10W-30 is the No. 1 consumer high-mileage brand of motor oil. It’s a synthetic blend engine oil that helps extend the life of engines by protecting against sludge, wear and burn-off. Engineered with Phosphorous Replacement Technology, it also protects emission systems by replacing some of the phosphorous that can damage catalytic converters.

Product Features:

• Phosphorus Replacement Technology helps extend emission system life
• Superior dispersancy that fights sludge build up
• Exceptional oil burn-off protection exceeding industry standards (1)
• Seal conditioners to help reduce leaks
• Advanced additives that minimize engine wear
• Improved fuel economy (2)
• (1) Based on API and ACEA volatility specifications
• ILSAC GF-6
• (2) In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
• API SP/SN PLUS/SN/SM
• ILSAC GF-6

FRAM Engine Oil SAE 5W-30 utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:

• Low-speed pre-ignition control
• Chain wear protection
• Piston cleanliness
• Turbo-compatibility
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.
• Reliable engine protection: FRAM Conventional Oil 5W30 5 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.

Castrol EDGE 10W-30 is an advanced full synthetic motor oil and the optimal choice for drivers who want the best combination of wear protection, viscosity control and thermal stability to maximize engine performance. It is one of Castrols strongest engine oils with the strength to maintain this unsurpassed level of engine protection for up to 20,000 miles between oil changes or one year.

Product Features:

• 3X Stronger than the leading full synthetic (1)
• 10X Better high stress performance (2)
• 20,000 miles between oil changes (3)
• (1) Viscosity breakdown as measured in Kurt Orbahn test on 5W-30 grade
• (2) As measured in Seq IX test under high load/torque conditions vs. API SP test limits
• (3) Or one year, whichever comes first
• Approved and Licensed Specifications:
• Exceeds API SP/SN PLUS/SN/SM
• ILSAC GF-6

Castrol EDGE Euro 5W-30 A3/B4 is an advanced full synthetic motor oil engineered to exceed manufacturer test limits ensuring the highest level of protection and maximum performance for European cars. European car manufacturers create unique motor oil specifications to ensure the lubricant can withstand the intense pressure, heat and friction generated in a high output engine. To ensure compliance, rigorous engine tests are developed, with approval granted only when the oil achieves the minimum values required in each test. Castrol EDGE Euro Car fluids are formulated to exceed these requirements and deliver maximum protection and performance.

Product Features:

• 1.2X Better viscosity control to help engines run better for longer (1)
• 2X Better engine cleanliness to help maximize engine performance (2)
• (1) As measured in DV6 test vs. test limit
• (2) As measured in OM646LA test vs. test limit
• Approved and licensed specifications:
• ACEA A3/B4
• API SL
• Meets Ford WSS-M2C946-B1
• BMW Longlife-01
• MB-Approval 229.5
• VW 502 00 / 505 00

Liqui Moly’s Leichtlauf High Tech 5W-40 is a fully synthetic, premium low-friction engine oil for all-season use in gasoline and diesel engines without diesel particulate filters (DPF). The combination of innovative base oils – based on synthesis technology and the latest additive technology – guarantees an engine oil that reduces oil and fuel consumption and that ensures fast lubrication of the engine. Depending on the manufacturer instructions, oil change intervals of up to 40,000 km are possible. Ideally suited for modern gasoline and diesel engines with multi-valve technology, turbocharger and with or without charge air cooling. Especially suitable where there are long intervals between changes and heavy duty engine requirements.

Product Features:

• All season use reliable at high and low temperatures
• Suited for modern gasoline and diesel engines with multivalve technology, turbocharger and with or without charge air cooling
• An engine oil that reduces oil and fuel consumption
• Ensures fast lubrication of the engine
• Made in germany
• Low-friction formula: Leichtlauf LIQUI-MOLY Synthetic Engine Oil 5W-40 is a premium, fully synthetic engine oil that reduces oil and fuel consumption, thanks to its low-friction formula.

Castrol GTX 5W-20 is a synthetic blend motor oil with a double-action formula proven to clean away the sludge that can block engine oilways (1) and help prevent new sludge formation. Sludge is a thick, tar like substance caused by severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals. Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life. (1) When tested in engines with a high level of sludge

Product Features:

• Premium-quality base oils and anti-wear additives that help extend engine life
• Superior protection against engine sludge
• Advanced protection against viscosity and thermal breakdown
• Superior protection against high-temperature deposits
• Meets or exceeds the following specifications:
• API SP/SN PLUS/SN/SM
• ILSAC GF-6
• Meets or exceeds the following specifications:
• Meets Ford WSS-M2C945-B1
• Meets Ford WSS-M2C960-A1

FRAM Engine Oil Full Synthetic SAE 5W-20 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories.

Product Features:

• Faster oil flow at start-up
• Fuel efficiency gains over heavier grade oils
• Excellent sludge and varnish protection
• Outstanding thermal and oxidation stability
• Lowers oil vaporization and consumption at extreme conditions
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
• Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 5W-20 meets stringent API: SP, SN, SM, SL, SJ and ILSAC GF-6A specifications, ensuring top-tier protection for your engine.
• Advanced Additive Technology: Specifically formulated to prevent low-speed pre-ignition (LSPI), a major concern for GDI and TGDI engines, thereby reducing the risk of pre-mature engine failure.
• Versatile Compatibility: Suitable for gas-direct engine (GDI), turbo gas-direct engine (TGDI), carbureted, and normally fuel-injected engines, making it a versatile choice for various engine types.

Pentosin HP 5W-30 Synthetic Motor Oil is a high-performance engine oil that is fully synthetic and designed for modern vehicles with extended oil service intervals. It is suitable for use in both gasoline and diesel engines, including those with turbochargers, as well as non-turbocharged vehicles that require 5W-30 oil. This all-season motor oil offers excellent protection against motor oil sludge and fuel deposits, and it contains special friction modifiers that help to reduce engine wear. Pentosin HP 5W-30 Synthetic Motor Oil is formulated for long service life intervals, making it an ideal choice for drivers who want to keep their engines running smoothly and efficiently. It meets service class API SL,CL.

Product Features:

• An all- season engine oil offering great protection against harsh start-up conditions and extreme temperature changes.
• Formulated for long service life intervals.
• Reduces engine oil sludge and fuel deposits.
• Contains special friction modifiers which help the engine run smoothly and improve fuel economy.
• Fully Synthetic Formula: Pento High Performance Engine Oil is made with a full synthetic formula, providing superior protection and performance for your engine.
• Meets API SL/CL Specs: This engine oil meets the latest API SL/CL specifications, ensuring that it meets the highest standards for engine protection and performance.

Castrol Full Synthetic 5W-30 Engine Oil is expertly formulated for highly tuned four-cylinder and latest technology engines that operate at higher temperatures. This full synthetic oil, classified as standard with an SAE oil weight of 5W-30, ensures exceptional lubrication for all engine components, from the valve train to the bearings, providing the strength needed for maximum engine performance.

Product Features:

• Expertly formulated for highly tuned four-cylinder and latest technology engines that operate at higher temperatures.
• Full synthetic composition ensures exceptional lubrication for all engine components, from the valve train to the bearings.
• Classified as standard with an SAE oil weight of 5W-30, providing the strength needed for maximum engine performance.
• Helps maximize engine performance by maintaining optimal lubrication under high-temperature conditions.
• Comes in a convenient 1 QT size, perfect for top-offs or completing oil changes.

FRAM Conventional High Mileage 5W20 Engine Oil is specially designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 5W20 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed all new car manufacturers’ warranty requirements as well as the stringent industry standards API SP/CF, and 5W20 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.

Product Features:

• Formulated with a unique combination of premium base oils and an enhanced additive system
• Provides increased protection in higher mileage engines
• Helps restore seal condition to reduce oil consumption
• Increases protection against high temperature deposits and ring sticking
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.
• Specially formulated for high mileage engines: FRAM High Mileage 5W20 1 QT is designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines, making it an ideal choice for vehicles with over 75,000 miles.

Castrol GTX 5W-20 is a synthetic blend motor oil with a double-action formula proven to clean away the sludge that can block engine oilways (1) and help prevent new sludge formation. Sludge is a thick, tar like substance caused by severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals. Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life. (1) When tested in engines with a high level of sludge

Product Features:

• Premium-quality base oils and anti-wear additives that help extend engine life
• Superior protection against engine sludge
• Advanced protection against viscosity and thermal breakdown
• Superior protection against high-temperature deposits
• Meets or exceeds the following specifications:
• API SP/SN PLUS/SN/SM
• ILSAC GF-6
• ILSAC GF-6
• Meets Ford WSS-M2C945-B1

Castrol EDGE High Mileage 10W-30 is an advanced full synthetic motor oil that is specifically designed for vehicles with over 75,000 miles. It’s been engineered to reduce leaks, burnoff and power robbing deposits, but also contains a proprietary additive to protect the emission system. Our Phosphorus Replacement Technology reduces harmful phosphorus to protect the catalytic converter and extend maximum performance. It is the natural choice for drivers who demand maximum performance from their high mileage car.

Product Features:

• Phosphorus Replacement Technology to help extend the life of the emission system
• Reduces leaks, oil burnoff and power robbing deposits
• 15,000 miles between oil changes (1)
• (1) Or one year, whichever comes first
• Meets or exceeds the following specifications:
• API SP/SN PLUS/SN/SM
• ILSAC GF-6

Castrol GTX 10W-40 is a premium conventional motor oil that has been helping to extend engine life for over 50 years. It is specially engineered to prevent harmful build-up of sludge while protecting against new oil splatter formation better than tough industry standards. Sludge is a thick, tar like substance caused by severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals. Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life.

Product Features:

• Advanced protection against viscosity and thermal breakdown
• Superior protection against engine sludge
• Premium quality base oils and anti-wear additives to help extend the life of your engine
• Helps minimize oil consumption
• (1) When tested in engines with a high level of sludge
• Meets or exceeds the following specifications:
• API SP/SN PLUS/SN/SM

5W-30 Pento Super Performance III is a newly formulated high performance engine oil designed to be used in vehicles that call for extended oil drain intervals. This oil is blended by using some of the most modern additives available and carefully selected synthetic based oils. By doing this the oil is considered a Low SAPS formulation that preserves catalysts, the environment, and maintains outstanding engine performance.

Product Features:

• An all- season motor oil offering great protection against harsh start-up conditions and extreme temperature changes.
• Formulated for long service life intervals.
• Reduces motor oil sludge and fuel deposits.
• Contains special friction modifiers which help the engine run smoothly and improve fuel economy.
• High Performance Formula: The 5W-30 Pento Super Performance III is a newly formulated high performance engine oil designed for vehicles with extended oil drain intervals.
• Advanced Additives: Blended with some of the most modern additives available, ensuring superior engine protection and performance.
• Full Synthetic Composition: Made from carefully selected synthetic based oils, providing excellent lubrication and stability.
• Low SAPS Formulation: Preserves catalysts and the environment while maintaining outstanding engine performance.
• Exceeds Industry Standards: Meets and exceeds API SM, CF; ACEA A3, B3, B4, C3 specifications, ensuring top-tier quality and reliability.

Give your higher mileage engine the care it deserves with Mobil 1 High Mileage full-synthetic motor oil 5W-30. This formula utilizes Mobil 1s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness to vehicles with over 75,000 miles. Mobil 1 High Mileage motor oil extends engine life by reducing friction and preventing deposits and sludge buildup-keeping critical engine parts clean and protected for up to 10,000 miles between oil changes. (1) Mobil 1 helps to keep your engine running at lower temperatures (2) and is proven to cool engine temperatures by over 10%. (3) Mobil 1 High Mileage full-synthetic motor oil 5W-30 also helps control oxidation to prevent oil breakdown and is recommended by ExxonMobil for all types of modern cars, SUVs, light vans, and light trucks-including those with high-performance, turbocharged, supercharged, multi-valve, or fuel-injected engines. Mobil 1 is Americas No. 1 selling synthetic motor oil brand at retail, (4) trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR. ( (1) Protects for up to 10,000 miles or 1 year, whichever comes first. To learn more about the Mobil 1 Limited Warranty, visit Mobil.US. (2) Compared to conventional oil. (3) Based on proprietary engine testing, results may vary. (4) Source: The NPD Group/ Retail Tracking Service/ Dollar Sales/ PCMO full-synthetic/ 52 weeks ending July 1, 2023)

Product Features:

• Mobil 1 High Mileage full-synthetic motor oil 5W-30 is designed for engines with over 75,000 miles to go up to 10,000 miles between oil changes.(1)
• Utilizes Mobil 1s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness
• Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
• Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -30 degrees F)
• Mobil 1 is specially formulated to help remove sludge and lower engine temperatures
• Manufacturer Part Number: 120769
• Extended Engine Life: This high mileage motor oil extends engine life by reducing friction and preventing deposits and sludge buildup, keeping critical engine parts clean and protected for up to 10,000 miles between oil changes.
• Temperature Control: Proven to cool engine temperatures by over 10%, Mobil 1 helps to keep your engine running at lower temperatures compared to conventional oil.
• Oxidation Control: Mobil 1 High Mileage motor oil helps control oxidation to prevent oil breakdown, ensuring long-lasting performance and protection.
• Versatile Compatibility: Recommended by ExxonMobil for all types of modern cars, SUVs, light vans, and light trucks, including those with high-performance, turbocharged, supercharged, multi-valve, or fuel-injected engines.

Castrol EDGE 5W-20 is an advanced full synthetic motor oil and the optimal choice for drivers who want the best combination of wear protection, viscosity control and thermal stability to maximize engine performance. It is one of Castrols strongest engine oils with the strength to maintain this unsurpassed level of engine protection for up to 20,000 miles between oil changes or one year.

Product Features:

• 3X Stronger than the leading full synthetic (1)
• 10X Better high stress performance (2)
• 20,000 miles between oil changes (3)
• (1) Viscosity breakdown as measured in Kurt Orbahn test on 5W-30 grade
• (2) As measured in Seq IX test under high load/torque conditions vs. API SP test limits
• (3) Or one year, whichever comes first
• Approved and Licensed Specifications:
• MB-Approval 229.5
• Exceeds API SP/SN PLUS/SN/SM
• Meets engine test requirements of Chrysler MS 6395
• Meets Ford WSS-M2C945-B1
• Meets Ford WSS-M2C960-A1

Pentosin HP II 5W-40 Synthetic Motor Oil is a high-performance engine oil that is designed to provide excellent protection for your vehicle all year round. This fully synthetic oil is formulated to offer longer changing intervals, reduce motor oil sludge and fuel deposits, and preserve the catalyst and the environment. It contains special friction modifiers that help to improve fuel efficiency and maintain outstanding engine performance. Pentosin HP II 5W-40 Synthetic Motor Oil exceeds service class API SM ACEA A3,B4, making it an ideal choice for drivers who demand the best from their vehicles. Whether you’re driving in extreme temperatures or under heavy loads, Pentosin HP II 5W-40 Synthetic Motor Oil will help keep your engine running smoothly and efficiently.

Product Features:

• An all- season engine oil offering great protection against harsh start-up conditions and extreme temperature changes.
• Formulated for long service life intervals.
• Reduces engine oil sludge and fuel deposits.
• Contains special friction modifiers which help the engine run smoothly and improve fuel economy.
• Fully Synthetic Oil Composition: PENTO HP II 5W-40 1L is made up of fully synthetic oil composition, which provides superior protection to the engine and ensures longer engine life.
• Longer Changing Intervals: The newly formulated PENTO HP II 5W-40 1L allows for longer changing intervals, which means less frequent oil changes and reduced maintenance costs.

European engines need a premium motor oil designed to help them last. Valvoline European Vehicle Full Synthetic Motor Oil. It’s the motor oil specially developed to extend the life of European-made gasoline and diesel engines. Our exclusive formula uses top wear additives, premium antioxidants and added detergents to fight wear, resist oil breakdown and defend against deposits better than industry standards. Its exceptional range of temperature protection ensures your engine will be defended when the weather and road conditions get tough. This superior level of protection makes it the best choice for most Audi, BMW, Mercedes-Benz, Porsche, and VW vehicles. Engineered with ingenuity, tested with tenacity, and proven with purpose, our formula was innovated in America with a century and a half of hands-on experience from the original motor oil brand.

Product Features:

• Advanced protection in european vehicles agains the four main causes of engine breakdown: wear friction heat and deposits
• Extra wear protection vs. industry and oem standards with advanced anti-wear additives
• Superior performance for european gasoline and diesel engines
• Exceptional high/low temperature protection defends your engine no matter the climate or driving conditions
• Meets or exceeds all requirements of api sp, acea a3/b3, a3/b4, mb 229.5, 229.3, &226.5, vw 50200/50500 & 50501, bmw ll-01 & ll-14fe+, porche a40, volvo 95200356, renault rn0700 & rn0710, psa b71 2296, and chrysler ms-12633/ ms-10725
• Superior engine sludge and varnish protection for European-made gasoline and diesel engines.

FRAM Engine Oil SAE 10W-30 utilizes a blend of high-quality conventional base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 10W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:

• Low-speed pre-ignition control
• Chain wear protection
• Piston cleanliness
• Turbo-compatibility
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.
• Suitable for modern engines: Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs.

FRAM Engine Oil SAE 10W-30 utilizes a blend of high-quality conventional base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 10W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 10W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:

• Low-Speed Pre-Ignition Control
• Chain Wear Protection
• Piston Cleanliness
• Turbo-Compatibility
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
• Versatile Compatibility: Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI), as well as older carbureted or normally fuel-injected gasoline engine designs.
• High-Quality Conventional Base Stocks: Utilizes a blend of high-quality conventional base stocks to ensure reliable engine protection across a broad range of operating conditions.
• Meets Stringent Standards: Complies with API SP, SN Plus, SN, SM, and ILSAC GF-6A, GF-5, and earlier API and ILSAC Service Categories, ensuring it meets the latest industry requirements.
• SAE oil weight of 10W-30, making it a dependable choice for various engine types.

Castrol EDGE Euro 5W-30 K is an advanced full synthetic motor oil engineered to exceed manufacturer test limits ensuring the highest level of protection and maximum performance for European cars. European car manufacturers create unique motor oil specifications to ensure the lubricant can withstand the intense pressure, heat and friction generated in a high output engine. To ensure compliance, rigorous engine tests are developed, with approval granted only when the oil achieves the minimum values required in each test. Castrol EDGE Euro Car fluids are formulated to exceed these requirements and deliver maximum protection and performance.

Product Features:

• 3X Better wear protection to reduce friction and optimize performance (1)
• 1.9X Better engine cleanliness to help maximize engine performance (1)
• (1) As measured in OM646LA test vs. test limit
• Approved and licensed specifications:
• ACEA C3
• API SP
• BMW Longlife-04
• Meets Ford WSS-M2C947-B1
• MB-Approval 229.31/ 229.51/ 229.52
• Porsche C30
• Renault RN 0700 / RN 0710

Castrol GTX High Mileage 5W-30 is the #1 consumer high-mileage brand of motor oil. It’s a synthetic blend engine oil that helps extend the life of engines by protecting against sludge, wear and burn-off. Engineered with Phosphorous Replacement Technology, it also protects emission systems by replacing some of the phosphorous that can damage catalytic converters.

Product Features:

• Phosphorus Replacement Technology helps extend emission system life
• Superior dispersancy that fights sludge build up
• Exceptional oil burn-off protection exceeding industry standards (1)
• Seal conditioners to help reduce leaks
• Advanced additives that minimize engine wear
• Improved fuel economy (2)
• (1)Based on API and ACEA volatility specifications
• Approved for BMW M-Models
• (2) In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
• Meets or exceeds the following specifications:
• API SP/SN PLUS/SN/SM
• ILSAC GF-6
• Meets Ford WSS-M2C946-B1
• Meets Ford WSS-M2C961-A1

Environmental factors such as poor fuel quality, hot weather and stop-start driving conditions can lead to sludge, varnish and carbon build-up in your engine: three factors that reduce engine life, power and fuel economy. Castrol Ultraclean is a synthetic blend engine oil available in 0W-20, 5W-20 and 5W-30 grades. Its double-action formula has been proven to clean away the sludge that can block engine oilways and helps prevent new sludge formation thanks to its synthetic technology. In fact, it provides up to 1.4X better sludge protection than is demanded by the latest industry standard. If keeping your engine clean is important to you, it’s good to know that no other oil keeps engines cleaner.

Product Features:

• 1.4X superior sludge protection compared to tough industry standards (As measured in the Sequence VH Sludge test vs. API SP test limits)
• Advanced protection against viscosity and thermal breakdown
• Superior protection against high-temperature deposits
• Premium-quality base oils and anti-wear additives that help extend the life of your engine
• Double-Action Formula: The synthetic blend engine oil features a double-action formula that effectively cleans away existing sludge and prevents new sludge formation.
• Versatile Grades: Available in 0W-20, 5W-20, and 5W-30 grades, Castrol Ultraclean caters to various engine requirements and driving conditions.
• Enhanced Engine Performance: By reducing sludge, varnish, and carbon build-up, this oil helps improve engine life, power, and fuel economy.
• Synthetic Blend Composition: The GTX Ultraclean 5W-20 Synthetic Blend Motor Oil combines the benefits of synthetic technology with the reliability of a standard oil class.