Jaguar XJR Alternators and Starters

Bosch Premium Alternators are designed, built and tested to provide the ultimate in performance and reliability.

Product Features:

• Full-load tested to guarantee compliance with Bosch’s strict performance specifications
• 100% factory tested, units are remanufactured (not rebuilt)
• Built to last – uses high quality materials and the most technologically advanced developments.

Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Air Strut Kit

Alternator

WAI is a leading parts manufacturer for the aftermarket. You’ll find superior quality and performance on all WAI 100% new alternators and starters as well as generators, motors, voltage regulators, rectifiers and other components.

Are you looking for a quality replacement part for your vehicle’s electrical system? Today’s remanufactured alternator is a complex combination of inner workings, and we completely remanufacture them to our own premium standard. All terminals are cleaned and replated. The slip rings are polished or replaced to maintain proper contact. The rectifier, diodes, rotor and bearings are performance tested or replaced for maximum output. All housings are cleaned and refinished and all stators are tested for integrity and recoated for corrosion prevention.

Product Features:

• OE-Equivalent Direct Fit Application.
• Fully tested to meet OE specifications.
• Provides exceptional reliability.

Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

DENSO alternators are not only original equipment on many of the world’s top production cars; they are a favorite in motorsports as well, where their light weight, high efficiency, and durability under the most gruelling conditions make them the natural choice. Remanufactured DENSO alternators go through a gruelling process: Stators and rectifiers are tested to 300 volts, while rotors are submitted to 600 volts, all to ensure reliable performance. Rotor slip rings are buffed to an 8 micron surface finish, with run out limited to 20 microns, minimizing brush wear and abrasion. Bearings are validated to OE standards and loaded with premium OE-standard lubricants. New or remanufactured, a DENSO alternator is a quality component.

Product Features:

• OE-Equivalent Direct Fit Application.
• Remanufactured using only OE Components.
• 29 performance and safety checks.
• Subjected to rigorous safety and performance tests.
• Tested to OE standards and re-packed with OE-grade lubricant.
• Provides exceptional reliability.

Bosch Premium Alternators are designed, built and tested to provide the ultimate in performance and reliability.

Product Features:

• Full-load tested to guarantee compliance with Bosch’s strict performance specifications
• 100% factory tested, units are remanufactured (not rebuilt)
• Built to last – uses high quality materials and the most technologically advanced developments.

WAI is a leading parts manufacturer for the aftermarket. You’ll find superior quality and performance on all WAI 100% new alternators and starters as well as generators, motors, voltage regulators, rectifiers and other components.

Product Features:

• Engineered to meet or exceed OEM specifications for a perfect fit and hassle-free installation.
• Premium grade solenoids contains materials specifically selected for best conductivity. High temperature cap ensures that the solenoid works flawlessly in high heat environments. High dielectric strenght outer case resists shorting.
• Armatures have precision machined and upgraded steel shaft for improved durability and performance.
• Each unit includes a printed copy of the test results so you know exactly what to expect from our parts right from the first time they power on.

DENSO remanufactured starters are subjected to rigorous testing; Armatures and field coils are high-voltage tested; commutators are refinished and performance-validated; terminals and fasteners are replaced with high-quality copper components. Every starter is exactingly bench-tested to ensure factory-original performance.

Product Features:

• High-voltage tested armature and field coils to ensure reliable performance
• Premium copper terminals to ensure a clean source of electrical current
• All-new bearings, brushes, and seals
• Maximum cranking torque under all conditions
• Class leaders in size and weight
• Environmentally designed to start in cold and hot weather conditions

The Denso 100% New Starter is manufactured to the strictest OE standards and subjected to rigorous safety and performance tests. Each Denso First Time Fit® starter goes through over 29 performance and safety checks and uses only the highest quality replacement components and OE-standard lubricants.

Product Features:

• OE-equivalent and direct fit application.
• 100% new starter with no remanufactured components.
• Armature – cleaned and high-voltage tested.
• Commutator – polished, gauged and performance tested.
• Clutch assembly – inspected, torque-tested and re-lubricated.
• 100% load tested.
• Designed to provide durability and performance.

Bosch has been a major supplier of new alternators and starters to OE vehicle manufacturers since 1913. Securing OE certification requires strict adherence to stringent precision and performance criteria. These same exacting criteria are also applied in the manufacturing of all Bosch aftermarket alternators and starters. Whether 100% remanufactured or new, Bosch Premium Alternators and Starters are quality built and 100% factory tested to ensure years of reliable performance, even under the most extreme operating conditions. That’s why they are preferred by more professional installers.

Product Features:

• Built to last using the highest quality materials and the most technologically advanced manufacturing processes
• Remanufactured using more new parts than any other unit
• 100% exhaustive multipoint quality and performance testing throughout the remanufacturing process ensures optimum starting and charging performance under all operating conditions
• Every unit is full-load tested to guarantee compliance with Bosch strict performance specifications
• Solenoid with 100% new terminal hardware, contact face and high temperature cap, are completely disassembled and computer performance tested for pull/hold strength
• 100% new long life self-lubricating brushes
• Gear train all new bushings
• Drive with 100% new bushings, springs, rollers, washers caps and high temperature lubrication
• Gear train lubricated with OE-specified grease providing protection from – 4 0 ?F to +3 02 ?F
• Commutator remachined to Bosch tight tolerances
• Permanent magnets/field coils tested for field strength and shorts (replaced with new as required)
• Armature continuity tested, gauged, straightened and shimmed
• All electrical connections resoldered
• All shaft splines and load bearing surfaces lubricated with OE high temperature grade

Bosch Premium Starters are designed, built and tested to provide the ultimate in performance and reliability.

Product Features:

• Built for extremes! Our new and reman starters and alternators are 100% factory tested to ensure reliable performance, under extremes of heat, cold and high demand
• Our new and reman starters and alternators are designed to perform equal to or better than the original equipment parts, that they replace
• Our new and reman starters and alternators are designed to be identical in fit and performance to original equipment parts
• Our new and reman starters and alternators utilize the latest manufacturing technologies and highest quality parts to ensure the best performance and longest life

Carquest Premium starters are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium starters are designed to meet or exceed OE specifications for fit, form and function. Our starters are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and needle bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:

• Designed to meet or exceed OE specifications for fit, form and function
• Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
• 100% remanufactured drive clutch assembly ensures lasting performance
• Armatures and commutators are 100% load tested
• New motor lead terminals and solenoid contacts are used to ensure maximum connectivity
• Application-specific technical bulletins included where applicable
• All units are 100% triple tested to ensure quality and performance
• Technical support team staffed with ASE Certified Technicians: 1-800-228-9672

Carquest Premium starters are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium starters are designed to meet or exceed OE specifications for fit, form and function. Our starters are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and needle bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:

• Designed to meet or exceed OE specifications for fit, form and function
• Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
• 100% remanufactured drive clutch assembly ensures lasting performance
• Armatures and commutators are 100% load tested
• New motor lead terminals and solenoid contacts are used to ensure maximum connectivity
• Application-specific technical bulletins included where applicable
• All units are 100% triple tested to ensure quality and performance
• Technical support team staffed with ASE Certified Technicians: 1-800-228-9672

Carquest Premium starters are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium starters are designed to meet or exceed OE specifications for fit, form and function. Our starters are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and needle bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:

• Designed to meet or exceed OE specifications for fit, form and function
• Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
• 100% remanufactured drive clutch assembly ensures lasting performance
• Armatures and commutators are 100% load tested
• New motor lead terminals and solenoid contacts are used to ensure maximum connectivity
• Application-specific technical bulletins included where applicable
• All units are 100% triple tested to ensure quality and performance
• Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
• This part number is upgraded with a durable sealant to help prevent contamination from engine leaks

Bosch Premium Starters are designed, built and tested to provide the ultimate in performance and reliability.

Product Features:

• Built for extremes! Our new and reman starters and alternators are 100% factory tested to ensure reliable performance, under extremes of heat, cold and high demand
• Our new and reman starters and alternators are designed to perform equal to or better than the original equipment parts, that they replace
• Our new and reman starters and alternators are designed to be identical in fit and performance to original equipment parts
• Our new and reman starters and alternators utilize the latest manufacturing technologies and highest quality parts to ensure the best performance and longest life

Bosch has been a major supplier of new alternators and starters to OE vehicle manufacturers since 1913. Securing OE certification requires strict adherence to stringent precision and performance criteria. These same exacting criteria are also applied in the manufacturing of all Bosch aftermarket alternators and starters. Whether 100% remanufactured or new, Bosch Premium Alternators and Starters are quality built and 100% factory tested to ensure years of reliable performance, even under the most extreme operating conditions. That’s why they are preferred by more professional installers.

Product Features:

• Built to last using the highest quality materials and the most technologically advanced manufacturing processes
• Remanufactured using more new parts than any other unit
• 100% exhaustive multipoint quality and performance testing throughout the remanufacturing process ensures optimum starting and charging performance under all operating conditions
• Every unit is full-load tested to guarantee compliance with Bosch strict performance specifications
• Solenoid with 100% new terminal hardware, contact face and high temperature cap, are completely disassembled and computer performance tested for pull/hold strength
• 100% new long life self-lubricating brushes
• Gear train all new bushings
• Drive with 100% new bushings, springs, rollers, washers caps and high temperature lubrication
• Gear train lubricated with OE-specified grease providing protection from – 4 0 ?F to +3 02 ?F
• Commutator remachined to Bosch tight tolerances
• Permanent magnets/field coils tested for field strength and shorts (replaced with new as required)
• Armature continuity tested, gauged, straightened and shimmed
• All electrical connections resoldered
• All shaft splines and load bearing surfaces lubricated with OE high temperature grade