International Scout II Drive Shafts and Axles

Product Features:

• Rear axle stud for Dana Spicer 44 and AMC Model 35
• 1/2″ x 20 thread
• 0.618″ knurl diameter
• 1 15/32″ long
• 31/64″ shoulder length

Dana 28, Dana 30, Model 35-Reverse, Dana 44, Dana 50 INside axle snap ring (next to side gear).

Product Features:

• Inner axle snap ring for Dana Spicer 28, 30, 44 and 50
• Intalls next to side gear

Front outer replacement axle seal for Dana 30 and 44 IHC.Yukon Mighty seal.

Product Features:

• Outer axle seal
• Fits Dana Spicer 30 and 44 in International Scout

Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.

Product Features:

• Direct replacement – this differential end yoke matches the fit and construction of the original yoke
• Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts
• Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
• Validated fit – this differential end yoke has been tested to confirm accurate fit

Designed to meet or exceed OE quality, premium-quality bearings from National are manufactured to exacting standards to deliver lasting performance and extended bearing life.

Product Features:

• BUILT TO LAST – Advanced heat treatment process for strength
• PREMIUM MATERIALS – Precision manufactured using premium-grade steel for lasting performance and extended bearing life
• RELIABLE PERFORMANCE – Element size and quantity are engineered to meet or exceed the load rating of OE bearings
• COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
• RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

Replacement redi-sleeve yoke saver for Dana 25, Dana 27, Dana 30, Dana 44, Dana 50 .Yukon Mighty seal.

Product Features:

• Pinion Redi-sleeve
• Fits Dana Spicer 25, 27, 30, 4 and 50

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Design type: spring loaded; multi-lip
• Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
• Good low temperature capability
• Low swell in hydrocarbon fluids
• Delivers quality and reliable performance for every type of repair

Product Features:

• BUILT TO LAST: Advanced heat treatment process for strength
• PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
• RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
• COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
• RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.

Product Features:

• OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
• Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
• The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
• Zerk allows for lubricating at regular intervals to help extend the life of the part.

Yukon hardcore drive flange kit for Dana 44, 19 spline outer stubs. Non-engraved caps..

Product Features:

• Drive flange kit
• Fits Dana Spicer 44 with 19 spline outer axles
• Includes two drive flanges, two caps and all necessary hardware

Yukon 4340 Chrome-Moly replacement outer stub for Dana 30 and 44, Scout, and CJ with a length of 8.72″ and 27 splines. Yukon 4340 Chrome-Moly axles provide up to 50% increased strength over stock axles for use in extreme performance applications with large tires and high horsepower. Yukon’s 4340 axles are manufactured using the latest technologies and the highest quality materials to ensure high strength and long life. Limited Lifetime warranty covers manufacturing defects and axle breakage for as long as you own the vehicle. This warranty is not transferable to another party. “No Questions Asked” replacement for first warranty return, however Yukon reserves the right to either replace axle or refund original purchase price after the first warranty claim. Yukon (through Randy’s ring & pinion) makes final determination on warranty considerations.

Product Features:

• Fits Dana Spicer 30 in Jeep CJ and Scout
• 4340 Chromoly
• Outer stub
• 27 spline
• 8.72″ from end of splines to center of u-joint bore

Yukon 4340 Chrome-Moly replacement outer stub for Dana 30 and 44 (CJ and Scout) with a length of 8.72″ and 30 splines. Yukon 4340 Chrome-Moly axles provide up to 50% increased strength over stock axles for use in extreme performance applications with large tires and high horsepower. Yukon’s 4340 axles are manufactured using the latest technologies and the highest quality materials to ensure high strength and long life. Limited Lifetime warranty covers manufacturing defects and axle breakage for as long as you own the vehicle. This warranty is not transferable to another party. “No Questions Asked” replacement for first warranty return, however Yukon reserves the right to either replace axle or refund original purchase price after the first warranty claim. Yukon (through Randy’s ring & pinion) makes final determination on warranty considerations.

Product Features:

• Fits Jeep CJ and Scout front
• 4340 Chromoly
• Outer stub
• 30 spline
• 8.72″ from end of splines to center of u-joint bore

Spindle bearing for Dana 44. This replaces Spicer part number 550759.

Product Features:

• Spindle bearing
• Fits Dana Spicer 44

With advanced load-carrying capacity and compact design, tapered roller bearings are used in wheel bearings, transmissions, differentials, transfer cases and other miscellanous applications. FAG manufacturers over 100 million tapered roller bearings annually.

Product Features:

• High-precision and High-quality components used in all KITs
• Coverage of classic and new high-tech solutions for the best system coverage

The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:

• Carrier bearing puller
• Works with an impact gun to safely and easliy remove carrrier bearings
• Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications

Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHEV 60-02; DODGE 57-02; FORD 55-07; GMC 63-02; INTL 57-02; KW 81-18; MACK 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.

Product Features:

• MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
• HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
• READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
• For Years: 1955-2018
• Weight approx: 4 Lbs
• BEARING ID / BORE: 1.5750 INCH / 40 MM
• CENTERLINE: 2.48 INCH / 63 MM
• MOUNT WIDTH: 6.62 INCH / 168 MM
• STYLE: ROUND FRAME
• NOT PICTURED: TWO DUST SHIELDS

Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 81-88; CCC 87-13; CHEV 60-90; DODGE 78-81; FORD 75-98; GMC 79-90; INTL 57-02; KW 81-18; MACK 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.

Product Features:

• MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
• HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
• READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
• For Years: 1957-2018
• Weight approx: 8 Lbs
• BEARING ID / BORE: 2.3622 INCH / 60 MM
• CENTERLINE: 3.37 INCH / 86 MM
• MOUNT WIDTH: 8.62 INCH / 219 MM

Yukon replacement axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Axle bearing and seal kit (Set10), some flanged, Timken brand, for Dana 44 and Model 20. This axle bearing & seal kit services one side only.

Product Features:

• Axle bearing and seal kit for Dana 44 rear and Nissan Titan rear
• Includes axle bearing and seal
• Services one side

Product Features:

• Axle bearing retainer for Jeep TJ rear with Dana Spicer 44
• 3/8″ bolt holes
• 1 5/8öx3 3/16ö bolt pattern

Product Features:

• Bearing retainer
• Fits Yukon axle part numbers YA D75786-1X and YA D75786-2X

Product Features:

• Outer stub dust shield for Dana Spicer 30, 44 and AMC Model 35 IFS

Product Features:

• Inner axle dust shield
• Fits Dana Spicer 30