International M800 Navy Ignition and Tune-Up Products
Top International M800 Navy Ignition and Tune-Up Products Categories
We carry over 74 Ignition and Tune-Up Products in inventory for the International M800 Navy. If you’re looking for aftermarket Ignition and Tune-Up Products for your International M800 Navy, check out all these categories:
Essential International M800 Navy Ignition and Tune-Up Products
Carquest Premium – Ignition Condenser (Part No.GAA1038)
from
$18.99
An Ignition Capacitor is a device that will absorb excessive voltage spikes in electrical systems. The typical location or use for a capacitor is inside a distributor tied into a point ignition system. The ignition capacitor may also be called a radio capacitor or condenser used in electrical devices which may be susceptible to voltage spikes.
Product Features:
See More
Product Features:
- Application matched component to ensure the system can be returned to like new condition.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Carquest Premium – Ignition Condenser (Part No.GAA1037)
from
$12.99
An Ignition Capacitor is a device that will absorb excessive voltage spikes in electrical systems. The typical location or use for a capacitor is inside a distributor tied into a point ignition system. The ignition capacitor may also be called a radio capacitor or condenser used in electrical devices which may be susceptible to voltage spikes.
Product Features:
See More
Product Features:
- Application matched component to ensure the system can be returned to like new condition.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Champion – Copper Plus Spark Plug (RJ6C): Dependable Performance & Durability (Part No.102)
from
$2.49
Copper Plus spark plug RJ6C delivers dependable performance and durability, making it an ideal choice for maintaining your vehicle’s efficiency. Featuring a copper core center electrode, it ensures precise heat control and enhanced conductivity, promoting longer life and consistent wear. The nickel-tipped center and ground electrodes provide superior corrosion resistance, ensuring reliable ignition performance over time. Designed as a standard replacement, this spark plug meets ISO and SAE Standards, guaranteeing proven performance and compatibility with a wide range of vehicles. Its flat seat type and built-in resistor further enhance its functionality, making it a trusted solution for optimal engine operation.
Product Features:
See More
Product Features:
- Copper Plus – Dependable Performance and Durability
- Copper core center electrode allows for accurate control of heat range for longer life
- Superior corrosion resistance
- Built to ISO and SAE standards for proven performance
- Built to ISO and SAE standards for proven performance
ACDelco – Copper Core Spark Plug: Reliable Performance & Durability (Part No.R43S)
from
$6.29
ACDelco Professional Conventional Spark Plugs are designed for reliability and efficient performance, and are a high quality replacement for many vehicles on the road today. Their high-quality copper cores and outstanding suppression characteristics deliver reliable performance. They are also available for Marine applications. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Black Onyx coating helps reduce corrosion
- Copper core provides great heat transfer and helps maximize plug durability
- Ribbed suppressor seal extends resistance and helps prevent spark ‘flash over’ and misfires
- Nickel-chrome alloy sheathing helps prevent corrosion on center electrode
- Available for use in Marine applications
- Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
- Premium aftermarket replacement part
- Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
Mallory – Universal Street Performance Ignition Coil (Part No.29219)
from
$83.99
Universal, 12-volt coil features an oil-filled design and arc resistant alkyd top for superior performance, insulation and cooling. The internal design of this coil eliminates the need for a separate ballast resistor. This coil is specifically designed to deliver optimum performance when used with: Mallory UNILITE or magnetic breaker less ignitions Mallory HYFIRE IV electronic ignition controls, and Mallory electronic ignition conversion kits.
Product Features:
See More
Product Features:
- 12 Volt Coil
- Oil-Filled Design
- Arch Resistant Alkyd Top
- Designed To Deliver Optimum Performance
Edelbrock – Ignition Coil No. 22739 12V Cannister Style, 1.4 Ohm Primary Resistance (Part No.22739)
from
$46.99
Edelbrock Ignition Coil No. 22739 is a universal 12-volt cannister-style coil designed as a high-quality direct bolt-on replacement for OEM ignition coils. This advanced coil has a primary resistance of 1.4 ohms with an output of 42,000 volts. Internally, each Edelbrock Coil features heavy-duty primary and secondary windings for higher energy and greater spark that can help to provide quicker starts with improved idle quality. With a durable oil-filled housing, Edelbrock Coils are resistant to heat, shock and vibration with an effective operating range of 0 to 6,500 RPM.
Product Features:
See More
Product Features:
- output of 42000V
Dorman – Help – Spark Plug Non-Foulers – 14mm Gasket Seat Long Reach (Part No.42004)
from
$9.99
This spark plug non fouler is designed for easy installation on specified vehicles to protect spark plugs from fouling and damage. It is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spark plug non fouler is designed for easy installation to protect spark plugs from fouling and damage on specified vehicles
- Ideal solution – this non-fouler preserves spark plug life and is a reliable replacement for an original non-fouler that has failed due to corrosion
- Durable construction – made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
PerTronix – 91482 Ignitor II Adaptive Dwell Control Holley 8 cyl (Part No.91482)
from
$212.99
The Ignitor II provides increased starting voltage with adaptive dwell control. Ignitor Module Kits are extremely easy to install and fit into your original distributor to maintain your stock look. No additional ignition box is required keeping a clean look under the hood. Ignitors are available for most distributors that came with mechanical breaker points and will cover AUTOMOTIVE, MARINE, INDUSTRIAL and AGRICULTURE applications.
Product Features:
See More
Product Features:
- Adaptive dwell maintains peak energy throughout the entire RPM range, reducing misfires while improving engine performance.
- Develops on average 4 times more available energy between 3000 and 5000 RPM, and 2 times more available plug voltage.
- Compensates for inherent electronic delay by adjusting the spark timing throughout the entire RPM range.
- Synchronized peak current and spark timing reduces heat build-up.
- Senses startup and develops more energy for quicker, easier starting.
- Pair with a Flame Thrower Canister Coil for optimal performance
- Legal in all 50 states and Canada (C.A.R.B. E.O. No. D-57-22)
PerTronix – 91481 Ignitor II Adaptive Dwell Control Holley 8 cyl (Part No.91481)
from
$201.99
The Ignitor II provides increased starting voltage with adaptive dwell control. Ignitor Module Kits are extremely easy to install and fit into your original distributor to maintain your stock look. No additional ignition box is required keeping a clean look under the hood. Ignitors are available for most distributors that came with mechanical breaker points and will cover AUTOMOTIVE, MARINE, INDUSTRIAL and AGRICULTURE applications.
Product Features:
See More
Product Features:
- Adaptive dwell maintains peak energy throughout the entire RPM range, reducing misfires while improving engine performance.
- Develops on average 4 times more available energy between 3000 and 5000 RPM, and 2 times more available plug voltage.
- Compensates for inherent electronic delay by adjusting the spark timing throughout the entire RPM range.
- Synchronized peak current and spark timing reduces heat build-up.
- Senses startup and develops more energy for quicker, easier starting.
- Pair with a Flame Thrower Canister Coil for optimal performance
- Legal in all 50 states and Canada (C.A.R.B. E.O. No. D-57-22)
Carquest – Distributor Rotor (Part No.D152)
from
$8.99
BWD SELECT designs, specifies, and manufactures replacement parts with one goal in mind-make them the very best. To maximize performance and longevity, we use the finest materials and improve on OE specifications, whenever possible.
Product Features:
See More
Product Features:
- High-quality direct replacement electrical connector allows you to replace only the damaged connector instead of the entire harness for a cost-effective repair
- The terminal is manufactured with high grade materials such as copper alloy, brass, and phosphor bronze. The housing is fabricated using polyamide resins. All of the materials together provide the connectors with prolonged life and superior performance.
- All electrical connectors are 100% tested for proper mechanical and electrical fit, form and function
- Offering thousands of high-quality pigtails & sockets for nearly every electrical job
Carquest Premium – Distributor Rotor (Part No.DAA1002)
from
$5.99
The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.
Product Features:
See More
Product Features:
- All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
- Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
- Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
- Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.
Felpro – Distributor Mounting Gasket (Part No.70051)
from
$4.29
Product Features:
See More
- Fel-Pro Oil Pan SnapUps 5/16″ bolts
- Designed to hold up the pan and gasket, for one person installation
- Engine Saver Hardware
- Unsurpassed quality you can trust
- Sold in sets of four and are reusable
Carquest Premium – Spark Plug Wire Set: 9 Wires, Increased performance, Designed for direct fit (Part No.35-8315)
from
$33.49
Product Features:
See More
- SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
- Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
- 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
- EPDM inner insulation stops power-robbing voltage leaks.
- With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
- Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
- Excellent interference suppression and consistent performance
- Easy lock terminals for more convenient installation.
- Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
- Broad coverage available for most vehicles on the road today
- Include grease pack to ensure easy installation and removal
Carquest Premium – Spark Plug Wire Set: 7 Wires, Increased performance, Designed for direct fit (Part No.35-6309)
from
$27.49
Product Features:
See More
- SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
- Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
- 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
- EPDM inner insulation stops power-robbing voltage leaks.
- With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
- Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
- Excellent interference suppression and consistent performance
- Easy lock terminals for more convenient installation.
- Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
- Broad coverage available for most vehicles on the road today
- Include grease pack to ensure easy installation and removal
PerTronix – 808415 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 115 Degree Red (Part No.808415)
from
$88.99
Most modern electronic ignition systems require suppression style wires to preserve sensitive components. Flame-Thrower 8mm Custom fit MAGx2 wires provide enhanced RFI suppression and dual current paths for more power delivered to the spark plug. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cutting, crimping and splicing.
Product Features:
See More
Product Features:
- Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
- Low 500 ohm per foot resistance.
- 8mm Silicone jacket to resist high temperatures, moisture, oil and chemicals.
- EPDM (Ethylene Propylene Diene Methylene) inner insulation for superior heat resistance and prevention of arcing and voltage leaks.
- Fiberglass reinforcing braid for added strength and flexibility.
PerTronix – 808480 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 180 Degree Red (Part No.808480)
from
$90.99
Most modern electronic ignition systems require suppression style wires to preserve sensitive components. Flame-Thrower 8mm Custom fit MAGx2 wires provide enhanced RFI suppression and dual current paths for more power delivered to the spark plug. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cutting, crimping and splicing.
Product Features:
See More
Product Features:
- Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
- Low 500 ohm per foot resistance.
- 8mm Silicone jacket to resist high temperatures, moisture, oil and chemicals.
- EPDM (Ethylene Propylene Diene Methylene) inner insulation for superior heat resistance and prevention of arcing and voltage leaks.
- Fiberglass reinforcing braid for added strength and flexibility.
Carquest Premium – Spark Plug Wire Set: 9 Wires, Increased performance, Designed for direct fit (Part No.35-8316)
from
$43.99
CARQUEST Premium Spark Plug Wire Sets are engineered to restore ignition wire reliability and performance. They are designed to meet or exceed OE design requirements, performance, fit, form and function of the OE wire. Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
Product Features:
See More
Product Features:
- SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
- Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
- 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
- EPDM inner insulation stops power-robbing voltage leaks.
- With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
- Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
- Excellent interference suppression and consistent performance
- Easy lock terminals for more convenient installation.
- Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
- Broad coverage available for most vehicles on the road today
- Include grease pack to ensure easy installation and removal
Product Features:
Carquest Premium – Distributor Cap and Rotor Kit (Part No.CAE1792)
from
$15.99
The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.
Product Features:
See More
Product Features:
- All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
- Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
- Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
- Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.
Carquest – Distributor Cap (Part No.24C1021)
from
$13.99
The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine¿s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.
Product Features:
See More
Product Features:
- All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
- Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
- Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
- Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.
Carquest – Distributor Cap (Part No.24E1023)
from
$11.99
The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine¿s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.
Product Features:
See More
Product Features:
- All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
- Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
- Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
- Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.
MSD Ignition – Cap/Rotor Kit; Street Fire; Ford V8; Socket (Part No.5506)
from
$52.99
All of the Street Fire components are spec’d by MSD engineers and designed to provide performance for the price. The quality of each part is backed up with a one year warranty!
Product Features:
See More
Product Features:
- Supplied w/Heavy Duty Rotor
- Low Resistance Terminals
- Full Power Output At High RPM
- Perfect For Budget Minded Enthusiasts
Carquest – Distributor Cap (Part No.C158)
from
$18.05
BWD SELECT replacement parts are designed, specified and manufactured with one goal in mind – to make them the very best. We use the finest materials and improve on OE specifications whenever possible. The result is maximum performance and longevity.
Product Features:
See More
Product Features:
- Distributor cap uses glass-filled polyester resin with dielectric strength as high as 630 volts per mil, for optimum performance.
- Distributor cap has aluminum terminals to match OE performance.
- The BWD SELECT® exceed the original performance. The benefit is greater customer confidence.
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
Carquest Premium – Distributor Cap (Part No.CAC1056)
from
$16.99
The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.
Product Features:
See More
Product Features:
- All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
- Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
- Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
- Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.
Carquest Premium – Distributor Cap (Part No.CAE1058)
from
$18.99
The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.
Product Features:
See More
Product Features:
- All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
- Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
- Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
- Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.
Carquest Premium – Distributor Cap (Part No.CAC1065)
from
$12.99
The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.
Product Features:
See More
Product Features:
- All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
- Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
- Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
- Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.
International M800 Navy Ignition and Tune-Up Products Categories
Helping You Find the Right Ignition and Tune-Up Products for Your International M800 Navy
You love your M800 Navy. So we’ve made it easier than ever to help you find International M800 Navy Ignition and Tune-Up Products in our online catalog. Our inventory holds 74 aftermarket and OEM Ignition and Tune-Up Products for your International M800 Navy, ranging from $2.49 to $212.99.
We offer parts from 16 brands trusted to make quality Ignition and Tune-Up Products for your International M800 Navy. Before you buy, take some time to read through customer reviews. We currently have 753 reviews of International M800 Navy Ignition and Tune-Up Products from previous customers. Some of the top rated parts include DiamondFire Spark Plug (E3.46): Enhanced Power & Fuel Efficiency with 3.9 stars and Platinum Spark Plug: Enhanced Durability & Improved Performance with 4.9 stars.
Find your M800 Navy Ignition and Tune-Up Products here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your International M800 Navy part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Ignition and Tune-Up Products Brands for Your International M800 Navy
Our inventory holds Ignition and Tune-Up Products for your International M800 Navy from 16 trusted brands. You’ll find OEM and aftermarket parts from brands like NGK, ACDelco, and Champion, all of which can keep that International happy.
We have Champion parts available for your International M800 Navy in categories like Spark Plugs. Some of the top-rated Champion parts in these categories are:
from
$3.79
(13)
Copper Plus Small Engine Spark Plug (J8C): Dependable Performance & Durability
Spark Plugs
Top-Rated NGK Ignition and Tune-Up Products
Leading NGK Ignition and Tune-Up Products
We carry NGK brand parts for your International M800 Navy across several catalog categories, including Spark Plugs. Some of our most reviewed NGK parts include:
FAQs for International M800 Navy Ignition and Tune-Up Products
What are the most purchased Ignition and Tune-Up Products for the International M800 Navy?
Out of 74 Ignition and Tune-Up Products for the International M800 Navy, the most popular in our inventory are:
What are the top-rated International M800 Navy Ignition and Tune-Up Products?
Top-rated Ignition and Tune-Up Products for your International M800 Navy based on customer reviews/ratings are:
from
$8.49
(16)
DiamondFire Spark Plug (E3.46): Enhanced Power & Fuel Efficiency
“Comical relief aside, I had a water Fowler plug in my pressure washer and chose to replace it.
Washer works great!”
from
$4.99
(10)
Platinum Spark Plug: Enhanced Durability & Improved Performance
“I used these plugs on a 400 bb mopar with 64/426 wedge heads .made tho engine run so much better the your standard copper plugs.yes I will buys these ”
