from

$209.99

This fuel injector control module is designed to match the fit and function of the original module on specified applications, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this FICM inverter board replaces the original board on certain Ford and Navistar vehicles to restore operation when the original unit fails from excessive heat and vibration
Cost-saving solution – when FICMs fail, it’s often only the power board, not the controller board and housing that make up the entire module; save money by just replacing broken board
No programming required – if you replace the entire module, you need to reinitialize it using professional tools, but not if you replace only the inverter board with this repair kit
Improved design – since the factory board fails from excessive heat and vibration, this unit features additional securing compound to help prevent it from failing the same way again in the future

from

$209.99

CARQUEST premium remanufactured injectors are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each injector is 100% tested on a sophisticated flow bench under multiple operating parameters to meet or exceed OE specifications.

Product Features:

Each unit is 100% tested to OE specifications
Includes 100% replacement of plunger and barrel to improve longevity over competitive units
Includes all new premium quality O-rings and seals
Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation

from

$224.05

Qualities that have made SMP an industry leader for more than 95 years, innovation, engineering expertise, superior quality, meticulous testing, unmatched customer service, competitive pricing, and brand integrity, are at the heart of every TechSmart part.

Product Features:

Allows you to replace only faulty power supply instead of entire fuel injection control module assembly
100% new, not remanufactured, so there’s no leftover debris that may cause failure
Re-engineered circuit board layout
Higher-quality electronics protect critical components from excess heat that can lead to failure

from

$367.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:

100% O-ring replacement
All Delphi injectors are tested utilizing OE methodologies
Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
No internal seal rings equals minimized leakage
Recessed fuel exit minimizing possible plugging
Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock

from

$257.05

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
State-of-the-art designs that meet or exceed OE specifications
Top-of-the-line quality and performance
With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues

from

$244.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Application-specific to ensure the proper fit and form
Precision-engineered pressure regulators for proper fuel delivery and engine performance
As a global manufacturer, we have complete control of the manufacturing process, from components to finished product?

from

$295.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
State-of-the-art designs that meet or exceed OE specifications
Top-of-the-line quality and performance
With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues

from

$10.49

The components in this fuel injector O-ring kit are designed to match the fit of the original O-rings on specified vehicles. They are engineered to help ensure leak-free connections to the fuel injectors during service or when the rings are damaged.

Product Features:

Direct replacements – the components in this fuel injector O-ring kit are designed to match the fit of the original O-rings on specified vehicles
Ideal solution – engineered to help ensure leak-free connections to the fuel injectors during service or when the rings are damaged
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$298.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:

100% O-ring replacement
All Delphi injectors are tested utilizing OE methodologies
Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
No internal seal rings equals minimized leakage
Recessed fuel exit minimizing possible plugging
Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock

from

$387.99

CARDONE Remanufactured Fuel Injectors provide an alternative plug and play solution to fuel delivery for diesel applications. All units are flow tested and balanced and replaced with new O-rings and gaskets. Each unit retains OEM duty cycle and pulse width ensuring reliable performance. All units are built to meet or exceed OEM performance, providing a quality product both you and your vehicle can rely on.

Product Features:

All gaskets, O-rings and bearings are replaced 100% to ensure optimal performance
Each assembled unit is individually calibrated and tested to ensure it meets or exceeds O.E.M. form, fit and function
All components are renewed or replaced as necessary to ensure high quality and durability
When applicable, improvements based on typical failure modes of original units are incorporated into the design and manufacture of replacement component parts, which translates into longer service life and less down-time for the driver
Guaranteed fit and function
Meets or exceeds O.E.M. performance

from

$319.05

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
State-of-the-art designs that meet or exceed OE specifications
Top-of-the-line quality and performance
With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues

from

$478.99

CARDONE Remanufactured Fuel Injection Regulating Valves control the pressure in the high pressure oil system which operates your injectors. Vehicle conditions such as poor idle, stalling, and no-start are some of the correctible symptoms. Each individual unit is completely disassembled and undergoes quality testing to ensure proper operating parameters to meet or exceed OEM performance.

Product Features:

Built and 100% tested to perform like the original, with all standard wear items replaced
Air decay tested to ensure on-car performance
Designed for easy installation and setup
Guaranteed fit and function
Meets or exceeds O.E.M. performance

from

$232.99

Injection control pressure determines fuel injection quantity under varying engine operating conditions. Improper injection quantity can result in poor engine performance or a no-start condition. New IPR valve is manufactured to meet or exceed original equipment performance specifications to ensure precise control of injection oil pressure.

Product Features:

Original equipment fit, form and function
Manufactured to precise OE performance specifications

from

$231.99

Injection control pressure determines fuel injection quantity under varying engine operating conditions. Improper injection quantity can result in poor engine performance or a no-start condition. New IPR valve is manufactured to meet or exceed original equipment performance specifications to ensure precise control of injection oil pressure.

Product Features:

Original equipment fit, form and function
Manufactured to precise OE performance specifications
O-ring seals included and installed on new IPR valve

from

$14.29

Complete injector seal kit includes all seven components necessary to properly reseal injector when installed. All parts in kit are manufactured using premium OE quality materials.

Product Features:

Kit includes top high-pressure oil inlet seal and metal C clip, two injector body O-rings, copper combustion seal and two electrical plug seals
Premium OE quality materials
Services one injector

from

$33.49

This fuel injection pressure regulator seal is designed to match the fit and function of the original seal on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this fuel injection pressure regulator seal is designed to match the fit and function of the original seal on specified vehicles
Restores functionality – this seal is made to fit and fully restore part functionality after the original seal fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$289.99

CARQUEST premium remanufactured injectors are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each injector is 100% tested on a sophisticated flow bench under multiple operating parameters to meet or exceed OE specifications.

Product Features:

Each unit is 100% tested to OE specifications
Includes 100% replacement of nozzle to ensure accurate and precise injection under all operating parameters
Includes new fuel line which requires replacement any time line is removed
Includes all new premium quality O-rings and seals
Includes stainless-steel combustion gasket
Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation

from

$318.99

Injection control pressure determines fuel injection quantity under varying engine operating conditions. Improper injection quantity can result in poor engine performance or a no-start condition. New IPR valve is manufactured to meet or exceed original equipment performance specifications to ensure precise control of injection oil pressure.

Product Features:

Original equipment fit, form and function
Manufactured to precise OE performance specifications
O-ring seals included and installed on new IPR valve

from

$257.99

CARQUEST premium remanufactured injectors are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each injector is 100% tested on a sophisticated flow bench under multiple operating parameters to meet or exceed OE specifications.

Product Features:

Each unit is 100% tested to OE specifications
Includes 100% replacement of the solenoids which eliminates wire insulation cracking and coil failure in the field
Includes 100% replacement of connector which ensures proper connection to vehicle wiring harness and proper fit and sealing through valve cover
Spool valves and housing are 100% leak and flow tested to meet or exceed OE specifications
New spool valves are designed with updated features to reduce injector stiction
Precision ground nozzles are 100% flow tested to ensure accurate and precise fuel delivery
Includes all new premium quality O-rings and seals
Includes copper combustion gasket
Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation

from

$344.99

CARDONE Remanufactured Fuel Injectors provide an alternative plug and play solution to fuel delivery for diesel applications. All units are flow tested and balanced and replaced with new O-rings and gaskets. Each unit retains OEM duty cycle and pulse width ensuring reliable performance. All units are built to meet or exceed OEM performance, providing a quality product both you and your vehicle can rely on.

Product Features:

All gaskets, O-rings and bearings are replaced 100% to ensure optimal performance
Each assembled unit is individually calibrated and tested to ensure it meets or exceeds O.E.M. form, fit and function
All components are renewed or replaced as necessary to ensure high quality and durability
When applicable, improvements based on typical failure modes of original units are incorporated into the design and manufacture of replacement component parts, which translates into longer service life and less down-time for the driver
Guaranteed fit and function
Meets or exceeds O.E.M. performance

from

$14.29

The injector sleeve provides sealing and cooling between the diesel fuel injector and cylinder head. Improper sealing can lead to combustion gas and coolant leaks into the fuel system, which can result in engine misfire and injector failure. Replacing the sleeve at time of injector service or replacement ensures proper sealing, improving injector longevity.

Product Features:

Original equipment fit, form and function

from

$350.05

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation

from

$279.99

CARDONE Remanufactured Fuel Injectors provide an alternative plug and play solution to fuel delivery for diesel applications. All units are flow tested and balanced and replaced with new O-rings and gaskets. Each unit retains OEM duty cycle and pulse width ensuring reliable performance. All units are built to meet or exceed OEM performance, providing a quality product both you and your vehicle can rely on.

Product Features:

All gaskets, O-rings and bearings are replaced 100% to ensure optimal performance
Each assembled unit is individually calibrated and tested to ensure it meets or exceeds O.E.M. form, fit and function
All components are renewed or replaced as necessary to ensure high quality and durability
When applicable, improvements based on typical failure modes of original units are incorporated into the design and manufacture of replacement component parts, which translates into longer service life and less down-time for the driver
Guaranteed fit and function
Meets or exceeds O.E.M. performance

from

$38.99

This fuel pressure regulator service kit is designed to match the original hardware required to repair the fuel injectors on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

Direct replacement – this fuel pressure regulator service kit is designed to match the original hardware required to repair the fuel injectors on specified vehicles
Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$334.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Our fuel pressure regulators are application specific for the perfect fit and form
A robust engineering design for greater resistance to leakage
With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues