International C102 Belts and Hoses
Top International C102 Belts and Hoses Categories
We carry over 27 Belts and Hoses in inventory for the International C102. If you’re looking for aftermarket Belts and Hoses for your International C102, check out all these categories:
Essential International C102 Belts and Hoses
Imperial – Metal Line Kit for Engine Oil Cooler (Part No.240293)
from
$59.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Metal line kit
- For use in engine oil cooler applications
- Routes oil lines past exhaust manifolds
- Provides protection where standard hoses can fail
- Used on Chevrolet V8 applications
- Routes oil lines past exhaust manifolds
- Provides protection where standard hoses can fail
- Comes with all parts needed for the job
Imperial – Engine Oil Cooler Hose (Part No.240112)
from
$48.99
1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.
Product Features:
See More
Product Features:
- Engine oil cooler hose
- Size: 1/2″ x 12′
- Designed for engine oil applications
- 12′ hose length accommodates most applications
- Size: 1/2 in. x 12′
- Designed for engine oil applications
- 12′ hose length accommodates most applications
- Medium duty applications
Gates – ThermalPro Premium Molded Coolant Hose (Part No.20338)
from
$9.79
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Materials specifically designed to resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing clamps and connectors every time a new cooling hose is installed.
- Caution: Do not use for fuel or oil transfer applications
Dayco – Bottom Cog V-Belt; 44.5 Inch Long, Exact Fit Premium Quality (Part No.15445)
from
$32.99
Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.
Product Features:
See More
Product Features:
- Provides greater durability and flexibility – 35% stronger than all previous versions
- Prevents electromechanical interference issues on modern vehicles
- Resists heat, oil and grease
Dayco – Bottom Cog V-Belt; 51.5 Inch Long, Exact Fit Premium Quality (Part No.15515)
from
$27.49
Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.
Product Features:
See More
Product Features:
- Provides greater durability and flexibility – 35% stronger than all previous versions
- Prevents electromechanical interference issues on modern vehicles
- Resists heat, oil and grease
Dayco – Bottom Cog V-Belt; 64 Inch Long, Exact Fit Premium Quality (Part No.15640)
from
$23.99
Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.
Product Features:
See More
Product Features:
- Provides greater durability and flexibility – 35% stronger than all previous versions
- Prevents electromechanical interference issues on modern vehicles
- Resists heat, oil and grease
- Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds
Dayco – Bottom Cog V-Belt; 43.5 Inch Long, Exact Fit Premium Quality (Part No.15435)
from
$16.79
Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.
Product Features:
See More
Product Features:
- Provides greater durability and flexibility – 35% stronger than all previous versions
- Prevents electromechanical interference issues on modern vehicles
- Resists heat, oil and grease
Imperial – Transmission Oil Cooler Hose (Part No.248001)
from
$32.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Transmission oil cooler hose
- 11/32″ x 4-1/2′
- Designed for transmission fluid applications
- Made for tight-radius applications found in transmission cooler installations
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
Gates – Green Stripe Heavy-Duty Vulco-Flex Coolant Hose (Part No.26521)
from
$34.99
Heavy-duty flexible hose designed to replace straight or curved coolant hoses. The benefit is maximum coverage with minimum inventory. Hose inside diameter remains constant from end to end. No convolutions inside hose so tube is smooth, allowing free coolant flow. Approved for marine applications.
Product Features:
See More
Product Features:
- Designed to resist electrochemical degradation, the main cause of pipe failure
- The steel wire spiral allows them to adopt multiple shapes without bending or crushing
- EPDM tube and Neoprene cover for extended service life
- Polyester fabric-ply reinforcement vulcanizes into shape without unnecessary strain on connections
- Resistant to heat, oil and ozone
- Compliant with SAE 20R5 Type EC Class D-2 specifications
- temperature range Deg. F to +257 degrees F (-40 degrees C to +125 degrees C)
- Warning: Do not use for fuel or oil transfer applications
- Caution: Do not use for fuel or oil transfer applications.
Gates – Premium Molded Coolant Hose (Part No.20357)
from
$18.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- The specially designed materials resist collapse under vacuum.
- Designed to resist electrochemical degradation, which is the primary cause of hose failure
- Pre-shaped to fit and ensure a perfect seal
- EPDM tube; synthetic fiber knit reinforcement; EPDM cover resistant to heat, ozone, and chemical refrigerants
- It meets the requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing clamps and connectors every time a new cooling hose is installed.
- Caution: Do not use for fuel or oil transport applications.
Gates – Vulco Straight Coolant Hose (Sold by inch) (Part No.24028)
from
$1.99
Specially engineered stick hose is ideal for straight coolant/air connections in automotive, stationary engine, industrial and home applications.
Product Features:
See More
Product Features:
- Heat-resistant cover
- Cover marked in 1-inch increments to facilitate approximate cut lengths, allows for “custom” installations.
- Meets the requirements of SAE 20R1 standard for Class D-2 walls
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: For a maintenance-free connection, use PowerGrip SB clamps
- Caution: Do not use for fuel or oil transfer applications
Gates – Green Stripe Heavy-Duty Vulco-Flex Coolant Hose (Part No.26504)
from
$34.49
Heavy-duty flexible hose designed to replace straight or curved coolant hoses. The benefit is maximum coverage with minimum inventory. Hose inside diameter remains constant from end to end. No convolutions inside hose so tube is smooth, allowing free coolant flow. Approved for marine applications.
Product Features:
See More
Product Features:
- Designed to resist electrochemical degradation, the main cause of pipe failure
- The steel wire spiral allows them to adopt multiple shapes without bending or crushing
- EPDM tube and neoprene lid for extended lifespan
- The polyester fabric reinforcement takes the form of vulcanization without unnecessary stress on the connections.
- Resistant to heat, oil and ozone
- Meets SAE 20R5 Type EC Class D-2 specifications
- Temperature range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transport applications.
- Caution: Do not use for fuel or oil transfer applications.
International C102 Belts and Hoses Categories
Helping You Find the Right Belts and Hoses for Your International C102
You love your C102. So we’ve made it easier than ever to help you find International C102 Belts and Hoses in our online catalog. Our inventory holds 27 aftermarket and OEM Belts and Hoses for your International C102, ranging from $1.99 to $59.99.
We offer parts from 4 brands trusted to make quality Belts and Hoses for your International C102. Before you buy, take some time to read through customer reviews. We currently have 2,240 reviews of International C102 Belts and Hoses from previous customers. Some of the top rated parts include Bottom Cog V-Belt; 51.5 Inch Long, Exact Fit Premium Quality with 5.0 stars.
Find your C102 Belts and Hoses here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your International C102 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Belts and Hoses Brands for Your International C102
Our inventory holds Belts and Hoses for your International C102 from 4 trusted brands. You’ll find OEM and aftermarket parts from brands like Imperial, Dayco, and Gates, all of which can keep that International happy.
We have Driveworks parts available for your International C102 in categories like Serpentine and V Belts. Some of the top-rated Driveworks parts in these categories are:
Top-Rated Imperial Belts and Hoses
Leading Imperial Belts and Hoses
We carry Imperial brand parts for your International C102 across several catalog categories, including Transmission Cooler Hoses. Some of our most reviewed Imperial parts include:
FAQs for International C102 Belts and Hoses
What are the most purchased Belts and Hoses for the International C102?
Out of 27 Belts and Hoses for the International C102, the most popular in our inventory are:
from
$12.99
This product is not rated
Bottom Cog V-Belt; 36.5 Inch Long, Exact Fit Premium Quality
V-Belts
What are the top-rated International C102 Belts and Hoses?
Top-rated Belts and Hoses for your International C102 based on customer reviews/ratings are:
