from

$32.99

An essential component in the diesel electronic control system, this sensor provides the vehicle powertrain control module (PCM) with camshaft position and engine speed. The PCM uses this to calculate accurate fuel injection timing. Failure of this component can result in a check engine light, engine misfire, no-start condition and poor drivability.

Product Features:

Original equipment fit, form and function
Direct OE replacement

from

$49.99

This oil pan dipstick flange repair kit is a direct replacement for a damaged or leaking dipstick flange. Includes new seals and a corrosion-resistant finish for a long service life.

Product Features:

Ideal replacement – this flange repair kit is a direct replacement for a damaged or leaking original equipment dipstick flange
Complete repair solution – this flange repair kit includes new seals and all hardware required to repair the flange
Easy to install – no special tools are required to install this flange kit
Quality tested – this part has undergone try-on, corrosion and material testing to ensure a quality fit and long service life

from

$37.99

This Dorman OE FIX oil pan dipstick flange repair kit includes a special tool that allows a leaky main O-ring to be changed without removing the oil pan, saving time. Kit includes enough O-rings to perform five complete repairs.

Product Features:

Saves time – this kit saves hours of shop time by allowing the leaky O-ring between the oil pan and the dipstick flange to be replaced without removing the pan
Special tool included – this dipstick flange repair kit includes a reusable special tool to allow replacement of the flange seal in place
Cost-effective solution – includes large (flange) and small (dipstick tube) O-rings to perform 5 complete repairs
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life

from

$84.99

This engine oil cooler gasket set is designed to match the original bolts required to repair and restore proper function to the oil cooler on specified vehicles.

Product Features:

Direct replacement – this engine oil cooler gasket set is designed to match the original gaskets required to repair and restore proper function to the oil cooler on specified vehicles
Restores functionality – this gasket set is made to fit and fully restore part functionality after the original gaskets fail
Durable construction – these parts are made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$82.99

This CARQUEST complete valve cover gasket kit features an updated integrated internal valve cover gasket harness, which supplies electrical signals to the glow plugs and fuel injectors. The kit also includes the necessary external harness pigtail to repair broken, cracked or melted connectors between the vehicle harness and valve cover gasket, a common cause of engine misfire.

Product Features:

Original equipment fit, form and function
Includes one valve cover gasket featuring integrated injector and glow plug internal harness
Includes harness pigtail to repair connection between valve cover and engine harness
Services one side

from

$21.99

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$11.79

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$355.99

Made In USA. Melling Engine Oil Priming Tank was developed as a way for engine builders to safely pre-prime the engine with oil prior to initial engine startup. The priming tank, when filled with clean oil and air pressure pumps oil into all of the critical areas of the new engine quickly and safely.

from

$1162.00

Rotomaster remanufactured Turbochargers are available for a vast array of automotive applications to meet the growing demand for maximum vehicle performance with optimal fuel efficiency. Every Rotomaster turbocharger has been designed and tested to guarantee O.E. fit and performance. Rotomaster is committed to getting your vehicle back on the road and back to peak performance with these remanufactured, direct-replacement turbochargers.

Product Features:

All wheels, shafts and corresponding bores are measured and controlled with specific go/no-go tolerances and renewed or replaced as needed to ensure trouble-free operation.
Each unit is 100% disassembled and thoroughly cleaned using proprietary processes and dedicated specialized equipment.
All components are inspected to exact standards, and renewed as appropriate to ensure that problematic areas that typically cause failure are renewed to the highest quality standards.
100% of rotating, journal, and thrust bearings and seals are replaced, and all mating surfaces/passages are renewed as required for a longer-lasting unit.
Each unit comes with a pre-lube syringe to ensure product protection during installation.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$399.99

This engine oil cooler is designed to match the fit and function of an original equipment cooler on specified vehicles. It is engineered to help maintain proper engine oil temperature when an original cooler has failed from heat, corrosion or damage.

Product Features:

Direct replacement – this engine oil cooler is designed to match the fit and function of an original equipment cooler on specified vehicles
Ideal solution – engineered to help maintain proper engine oil temperature when an original cooler has failed from heat, corrosion or damage
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$6.99

Product Features:

Superior Wear Protection – Formulated with extreme pressure additives to protect engine components from metal-to-metal contact during initial startup
High Tackiness – Stays in place during assembly and storage, ensuring consistent lubrication exactly where it’s needed
Broad Compatibility – Safe for use with all engine components including camshafts, lifters, bearings, and valve train parts
Easy Startup Support – Reduces friction and prevents dry starts by providing instant lubrication during first engine fire-up

from

$113.99

Product Features:

Superior Wear Protection – Formulated with extreme pressure additives to protect engine components from metal-to-metal contact during initial startup
High Tackiness – Stays in place during assembly and storage, ensuring consistent lubrication exactly where it’s needed
Broad Compatibility – Safe for use with all engine components including camshafts, lifters, bearings, and valve train parts
Easy Startup Support – Reduces friction and prevents dry starts by providing instant lubrication during first engine fire-up

from

$144.99

This engine oil cooler mount is designed to match the fit and function of the original mount on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this engine oil cooler mount is designed to match the fit and function of the original mount on specified vehicles
Restores functionality – reliable replacement for an original cover that has failed due to corrosion
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$285.99

Made in USA. Melling oil pumps provide dependable performance every time in every application. Every Melling oil pump is engineered and assembled to the highest production standards from high quality materials. All Melling oil pumps use the latest in gear and gerotor technology to provide the highest level of quality and performance. Gears are machined to close tolerances to ensure proper engine pressure and correct, efficient pump operation. End plates are precision ground for maximum wear resistance. Every Melling oil pump is individually tested for pressure and flow under conditions designed to duplicate actual engine operating conditions.

Product Features:

Manufactured from high quality materials for consistent durable wear
Precision engineered for optimum fit and function
Designed for long-life and worry-free performance
Melling oil pumps are tested for pressure and flow under operating conditions to ensure quality

from

$279.99

Oil pan leaking? This engine oil pan is precision-engineered to match the original equipment pan on specific vehicle years, makes and models for a reliable replacement.

Product Features:

Direct replacement – this engine oil pan is made to match the original pan on specific vehicles
Complete assembly – includes replacement pan and drain plugs to match original components
Durable design – high-strength coating prevents future corrosion
Trustworthy value – backed by team of engineers and quality control experts in the United States