International 1500D Belts and Hoses
Top International 1500D Belts and Hoses Categories
We carry over 5 Belts and Hoses in inventory for the International 1500D. If you’re looking for aftermarket Belts and Hoses for your International 1500D, check out all these categories:
Essential International 1500D Belts and Hoses
Gates – Premium Molded Coolant Hose (Part No.20639)
from
$82.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Materials specifically designed to resist collapse under vacuum
- Designed to resist electrochemical degradation, the main cause of casing failure
- Pre-formed for a good fit and to ensure perfectly sealed connections
- EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
- It meets the requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- temperature range Deg. F to +257 degrees F (-40 degrees C to +125 degrees C)
- Note: Gates recommends replacing the clamps and connectors each time a new radiator hose is installed.
- Caution: Do not use for fuel or oil transfer applications
Gates – Premium Molded Coolant Hose (Part No.20357)
from
$18.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- The specially designed materials resist collapse under vacuum.
- Designed to resist electrochemical degradation, which is the primary cause of hose failure
- Pre-shaped to fit and ensure a perfect seal
- EPDM tube; synthetic fiber knit reinforcement; EPDM cover resistant to heat, ozone, and chemical refrigerants
- It meets the requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing clamps and connectors every time a new cooling hose is installed.
- Caution: Do not use for fuel or oil transport applications.
Imperial – Transmission Oil Cooler Hose (Part No.248001)
from
$32.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Transmission oil cooler hose
- 11/32″ x 4-1/2′
- Designed for transmission fluid applications
- Made for tight-radius applications found in transmission cooler installations
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
Gates – FleetRunner Heavy-Duty V-Belt (Part No.9510HD)
from
$46.99
Designed for the toughest applications, Fleet Runner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. Fleet Runner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.
Product Features:
See More
Product Features:
- The patented material offers optimal performance at extremely high operating temperatures.
- Construction resistant to cracking, wear, oil and heat
- Special compound provides unmatched stability, load carrying capacity and belt life
- The unique notch pattern offers greater flexibility for smaller diameter pulleys
- Problem solver for failing disks
- Designed to save your fleet money and reduce downtime
- Compliant with RMA standards for oil and heat resistance and static conductivity requirements
Gates – Automotive XL High Capacity V-Belt (Part No.9510)
from
$44.99
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.
Product Features:
See More
Product Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- The shape is rectified to ensure precise dimensional control of the top width and side wall for a proper fit to the pulley.
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- It resists oil, heat, ozone, weather, and decay to improve belt life.
- Meets or exceeds SAE J636C specifications
International 1500D Belts and Hoses Categories
Helping You Find the Right Belts and Hoses for Your International 1500D
You love your 1500D. So we’ve made it easier than ever to help you find International 1500D Belts and Hoses in our online catalog. Our inventory holds 5 aftermarket and OEM Belts and Hoses for your International 1500D, ranging from $18.99 to $82.99.
We offer parts from 2 brands trusted to make quality Belts and Hoses for your International 1500D. Before you buy, take some time to read through customer reviews. We currently have 564 reviews of International 1500D Belts and Hoses from previous customers.
Find your 1500D Belts and Hoses here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your International 1500D part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Belts and Hoses Brands for Your International 1500D
Our inventory holds Belts and Hoses for your International 1500D from 2 trusted brands. You’ll find OEM and aftermarket parts from brands like Imperial and Gates, all of which can keep that International happy.
We have Imperial parts available for your International 1500D in categories like Transmission Cooler Hoses. Some of the top-rated Imperial parts in these categories are:
FAQs for International 1500D Belts and Hoses
What are the most purchased Belts and Hoses for the International 1500D?
Out of 5 Belts and Hoses for the International 1500D, the most popular in our inventory are:
