Infiniti QX56 Belts and Hoses

Essential Infiniti QX56 Belts and Hoses

Driveworks – Poly Rib Belt Serpentine Belt; 97.3 Long, 7 Rib Count (Part No.973K7)

Poly Rib Belt Serpentine Belt; 97.3 Long, 7 Rib Count

from

$67.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Dayco – Poly Rib Belt Serpentine Belt; 96.14 Long, 7 Rib Count (Part No.5070961)

Poly Rib Belt Serpentine Belt; 96.14 Long, 7 Rib Count

from

$73.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
  • Made in the USA
See More

Dayco – Poly Rib Belt Serpentine Belt; 97.3 Long, 7 Rib Count (Part No.5070973)

Poly Rib Belt Serpentine Belt; 97.3 Long, 7 Rib Count

from

$55.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 12 Inch Length (Part No.80412)

Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 12 Inch Length

from

$31.99
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • Meets Type EC electro-chemical requirements as specified in SAE J1684
See More

Dayco – Straight Heater Hose; EPDM Rubber, 3/4 Inch Diameter (sold by foot) (Part No.80273)

Straight Heater Hose; EPDM Rubber, 3/4 Inch Diameter (sold by foot)

from

$1.29
Specifically designed to carry the heated coolant from the engine block to the heater core under the dashboard and return it to the engine, this Dayco Standard Heater Hose is constructed using all EPDM compounds and spiral reinforcement for high burst strength and excellent heat resistance. Made for general service on light trucks and passenger cars, this hose is similar to SAE 20R3, Class D-2 and has a temperature rating of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). This Dayco Standard Heater Hose is compatible with all common coolant and coolant additives. Note: This hose is NOT suitable for fuel or oil transfer.

Product Features:
  • Specifically designed to be compatible with all common coolants and coolant additives
  • Constructed using all EPDM compounds and spiral reinforcements
  • Similar to SAE 20R3, Class D-2
  • Has a high burst strength and excellent heat resistance of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
  • PLEASE NOTE: Item is sold and priced by the foot. See store for details.
See More

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 18 Inch Length (Part No.80413)

Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 18 Inch Length

from

$23.49
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • Meets Type EC electro-chemical requirements as specified in SAE J1684
See More

Gates – Premium Molded Coolant Hose (Part No.23280)

Premium Molded Coolant Hose

from

$26.49
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 9.50" Long, 1.28" Diameter (Part No.B70854)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 9.50" Long, 1.28" Diameter

from

$30.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15" Long, 1.31" Diameter (Part No.E72303)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15" Long, 1.31" Diameter

from

$39.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Flex Radiator Hoses; EPDM Rubber, 17.25 Inch Long, 1.25 Inch Inner Dia. (Part No.81051)

Flex Radiator Hoses; EPDM Rubber, 17.25 Inch Long, 1.25 Inch Inner Dia.

from

$23.99
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.

Product Features:
  • Designed to meet OE specifications
  • Not suitable for oil or heat transfer
  • Meets SAE J20R4, Class D-2 requirements for improved service hoses
  • This hose is designed to prevent splitting, ballooning, and elongation
See More

Gates – Safety Stripe Standard Straight Heater Hose (Sold by foot) (Part No.28409)

Safety Stripe Standard Straight Heater Hose (Sold by foot)

from

$2.49
Premium hose constructed for long service life.

Product Features:
  • Good resistance to high temperatures for extended periods of time, which extends the service life.
  • Meets SAE 20R3 Standard Wall Class D-2 requirements
  • Temperature range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Warning: Do not use for fuel or oil transfer applications
  • PLEASE NOTE: Item is priced and sold by the foot. See store for details.
See More

Gates – Straight Heater Hose: EPDM, Direct Fit, 0.625" Inside Diameter (sold by foot) (Part No.28411)

Straight Heater Hose: EPDM, Direct Fit, 0.625" Inside Diameter (sold by foot)

from

$1.99
Premium hose constructed for long service life.

Product Features:
  • Good resistance to high temperatures for extended periods of time, which prolongs service life
  • Meets SAE 20R3 Standard Wall Class D-2 requirements
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • CAUTION: Do not use for fuel or oil transfer applications
  • PLEASE NOTE: Item is priced and sold by the foot. See store for details.
See More

Dorman – Automatic Belt Tensioner (Tensioner Only) (Part No.419-319)

Automatic Belt Tensioner (Tensioner Only)

from

$58.99
This accessory drive belt tensioner assembly is designed to match the fit of an original equipment assembly on specified vehicles. It is engineered to help ensure proper belt tension when an original belt is slipping, broken, or worn from fatigue.

Product Features:
  • Direct replacement – this accessory drive belt tensioner assembly is designed to match the fit of an original equipment assembly on specified vehicles
  • Ideal solution – engineered to help ensure proper belt tension when an original belt is slipping, broken, or worn from fatigue
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999710A)

Accessory Drive Belt Tensioner - Original Equipment Quality

from

$91.99
Litens was the Original Equipment (O.E.) suppliers of this Nissan/Infinity tensioner and offers this “O.E. Exact”* part for the aftermarket. This “O.E. Exact”* part for the aftermarket meets all original equipment form, fit, and function specifications. *(O.E. Exact – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design). This popular tensioner is designed with a heavy duty steel pulley for long life and trouble free performance. Choosing The Correct Replacement Part: Both the original equipment and Litens aftermarket tensioner use round spring technology and are marked “Made in Canada”. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
  • Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
  • Installation instructions included.
  • Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
  • Professional Mechanics will change this tensioner in approx. 20 minutes.
  • Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.
See More

INA US – ACC DRV BELT TNS ASY (Part No.FT40224)

ACC DRV BELT TNS ASY

from

$84.99
ACC DRV BELT TNS ASY

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999571A)

Accessory Drive Belt Tensioner - Original Equipment Quality

from

$385.99
This Heavy duty belt tensioner is manufactured by one of the largest original equipment tensioner suppliers to ensure proper fit and performance. This tensioner is produced for serpentine belt routing applications and is made of high strength steel for improved life and durability. This part corresponds to the 2011-2015 Nissan NV/Infiniti QX56,QX80 with 5.6L. The tensioner maintains the O.E. round spring technology as well as the internal damping design specified for this application. This higher damping consequently reduces arm motion and wear as well as an optimized install feature for ease on tensioner replacement. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Manufactured by one of the largest original equipment part suppliers to ensure proper form, fit, and performance
  • Internal “round spring” technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance.
  • Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
  • Installation instructions included
See More

Litens – Idler Pulley: Direct Fit, Steel, 72mm Diameter (Part No.900371A)

Idler Pulley: Direct Fit, Steel, 72mm Diameter

from

$54.99
This Litens pulley is manufactured by one of the largest original equipment pulley suppliers to ensure proper fit and performance. This pulley is produced for serpentine belt routing applications and conforms to original equipment material, tolerances, and specifications. This replacement part is made in Canada to the O.E. specified design and meets all performance and durability requirements. This Heavy duty Steel pulley is specifically designed for Nissan truck and SUV applications. A new 12mm I.D. reduction bearing included. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Manufactured by one of the largest original equipment part suppliers to ensure proper form, fit, and performance.
  • Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
  • Installation instructions included.
See More

Helping You Find the Right Belts and Hoses for Your Infiniti QX56

You love your QX56. So we’ve made it easier than ever to help you find Infiniti QX56 Belts and Hoses in our online catalog. Our inventory holds 20 aftermarket and OEM Belts and Hoses for your Infiniti QX56, ranging from $1.29 to $385.99.

We offer parts from 6 brands trusted to make quality Belts and Hoses for your Infiniti QX56. Before you buy, take some time to read through customer reviews. We currently have 789 reviews of Infiniti QX56 Belts and Hoses from previous customers. Some of the top rated parts include Idler Pulley: Direct Fit, Steel, 72mm Diameter with 1.0 stars.

Find your QX56 Belts and Hoses here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Infiniti QX56 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Belts and Hoses Brands for Your Infiniti QX56

Our inventory holds Belts and Hoses for your Infiniti QX56 from 6 trusted brands. You’ll find OEM and aftermarket parts from brands like Dayco, DriveWorks, and Gates, all of which can keep that Infiniti happy.

Top-Rated Dayco Belts and Hoses

Leading Dayco Belts and Hoses

We carry Dayco brand parts for your Infiniti QX56 across several catalog categories, including Serpentine and V Belts and Radiator Hoses. Some of our most reviewed Dayco parts include:
Poly Rib Belt Serpentine Belt; 97.3 Long, 7 Rib Count
from $55.99
(70)
Poly Rib Belt Serpentine Belt; 97.3 Long, 7 Rib Count
Serpentine Belts

FAQs for Infiniti QX56 Belts and Hoses

What are the most purchased Belts and Hoses for the Infiniti QX56?

Out of 20 Belts and Hoses for the Infiniti QX56, the most popular in our inventory are:
Poly Rib Belt Serpentine Belt; 97.3 Long, 7 Rib Count
from $67.99
(28)
Poly Rib Belt Serpentine Belt; 97.3 Long, 7 Rib Count
Serpentine Belts
Safety Stripe Standard Straight Heater Hose (Sold by foot)
from $2.49
This product is not rated
Safety Stripe Standard Straight Heater Hose (Sold by foot)
Coolant Hoses
Accessory Drive Belt Tensioner - Original Equipment Quality
from $91.99
This product is not rated
Accessory Drive Belt Tensioner – Original Equipment Quality
Belt Tensioner Assemblies

What are the top-rated Infiniti QX56 Belts and Hoses?

Top-rated Belts and Hoses for your Infiniti QX56 based on customer reviews/ratings are:
Idler Pulley: Direct Fit, Steel, 72mm Diameter
from $54.99
(1)
Idler Pulley: Direct Fit, Steel, 72mm Diameter
“Did not need part. Bought just in case. But part was rusty and looked as it was once pit in service. Loose in beat up box. Not even wrapped up. Disapp”