Infiniti QX4 Drivetrains
Top Infiniti QX4 Drivetrains Categories
We carry over 29 Drivetrains in inventory for the Infiniti QX4. If you’re looking for aftermarket Drivetrains for your Infiniti QX4, check out all these categories:
Essential Infiniti QX4 Drivetrains
Valvoline – DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.822405)
from
$14.49
Valvoline DEXRON-VI/MERCON LV ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors DEXRON-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON-II and/or DEXRON-III are recommended. Recommended for use in the following applications: DEXRON-VI, DEXRON-III, DEXRON-II, and Allison C-4.
Product Features:
See More
Product Features:
- Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
- Enhanced anti-shudder protection for smooth shifting and maximum power transfer
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
Dorman – Drive Shaft Repair Kit – Only Fits Dorman Driveshafts (Part No.932-988)
from
$59.99
This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle
- Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – 1-Piece Steel Driveshaft Assembly (OE Fix) (Part No.946-240)
from
$1072.99
The original drive shafts on specific vehicles have permanently staked universal joints that make servicing difficult. This Dorman OE FIX rear drive shaft makes the U-joints serviceable for simpler maintenance.
Product Features:
See More
Product Features:
- Ready to install – this drive shaft is shipped pre-assembled and factory balanced to ensure immediate smooth operation
- Simplifies repair – this replacement makes the U-joints serviceable for simpler maintenance
- All-new manufacturing – made 100% new, not remanufactured, so there’s no core charge or return hassle
- Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
National – Multi-Purpose Bearing (Part No.32308-C)
from
$61.99
Product Features:
See More
- CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
- PREMIUM MATERIALS: Precision manufactured using high-quality materials for durability and performance
- OE-STYLE DESIGN: Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
National – Multi-Purpose Bearing (Part No.30209-C)
from
$61.99
Product Features:
See More
- CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
- PREMIUM MATERIALS: Precision manufactured using high-quality materials for durability and performance
- OE-STYLE DESIGN: Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
FAG US – Shaft Seal (Part No.SS3607)
from
$6.29
Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.
Product Features:
See More
Product Features:
- High-precision and High-quality components used in all KITs
- Coverage of classic and new high-tech solutions for the best system coverage
MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.393)
from
$25.99
Product Features:
See More
- COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
- GREASABLE DESIGN – Greasable u-joints allow for new grease to flush out contaminants and moisture
- KEEPS DIRT OUT – Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Cross forging shape and flash provide easier installation and high strength
National – Multi-Purpose Seal (Part No.710665)
from
$15.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
- Resistance to EP lubricants
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
National – Transfer Case Output Shaft Seal (Part No.710113)
from
$14.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
Beck/Arnley – Cu Joint Boot Kit (Part No.103-2288)
from
$31.49
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- One piece neoprene boot
- Kit complete with boot, grease, and hardware for complete installation
- Hardware matches original design requirements
- Application specific for this vehicle
Dorman – Uni-Fit C.V. Joint Boot Kit Outer greater than 3.58 In. Diameter (Part No.614-003)
from
$34.99
This CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself
- Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest Premium – CV Axle Shaft Assembly (Part No.NCV53128)
from
$189.99
All CARQUEST axles have a new zinc dichromate plated nut or attaching hardware. CV joint grease has a high moly content. The boot bands are made from stainless steel, and the boots are manufactured to resist wear and damage due to extreme high and low temperatures.High moly CV joint grease with stainless-steel boot bands
See More
FAG US – Shaft Seal (Part No.SS2533)
from
$17.99
Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.
Product Features:
See More
Product Features:
- High-precision and High-quality components used in all KITs
- Coverage of classic and new high-tech solutions for the best system coverage
Driveworks – Camshaft Seal (Part No.S-99139)
National – Axle Diff. Seal (Part No.711070)
from
$19.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
- Resistance to EP lubricants
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
National – Shaft Repair Sleeve (Part No.99139)
from
$39.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
National – Shaft Repair Sleeve (Part No.99181)
from
$37.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
National – Shaft Repair Sleeve (Part No.99157)
from
$37.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
National – Multi-Purpose Seal (Part No.225040)
from
$7.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
National – Shaft Repair Sleeve (Part No.99189)
from
$38.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
Infiniti QX4 Drivetrains Categories
Helping You Find the Right Drivetrains for Your Infiniti QX4
You love your QX4. So we’ve made it easier than ever to help you find Infiniti QX4 Drivetrains in our online catalog. Our inventory holds 29 aftermarket and OEM Drivetrains for your Infiniti QX4, ranging from $6.29 to $1,072.99.
We offer parts from 10 brands trusted to make quality Drivetrains for your Infiniti QX4. Before you buy, take some time to read through customer reviews. We currently have 4,447 reviews of Infiniti QX4 Drivetrains from previous customers. Some of the top rated parts include Uni-Fit C.V. Joint Boot Kit Outer greater than 3.58 In. Diameter with 3.3 stars and CV Axle Shaft Assembly with 4.2 stars.
Find your QX4 Drivetrains here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Infiniti QX4 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Drivetrains Brands for Your Infiniti QX4
Our inventory holds Drivetrains for your Infiniti QX4 from 10 trusted brands. You’ll find OEM and aftermarket parts from brands like Mobil Oil, Royal Purple, and Valvoline, all of which can keep that Infiniti happy.
We have MOOG Driveline Products parts available for your Infiniti QX4 in categories like Universal Joints. Some of the top-rated MOOG Driveline Products parts in these categories are:
Top-Rated Mobil 1 Drivetrains
Leading Mobil 1 Drivetrains
We carry Mobil 1 brand parts for your Infiniti QX4 across several catalog categories, including Differentials. Some of our most reviewed Mobil 1 parts include:
FAQs for Infiniti QX4 Drivetrains
What are the most purchased Drivetrains for the Infiniti QX4?
Out of 29 Drivetrains for the Infiniti QX4, the most popular in our inventory are:
from
$41.99
(133)
High Performance 5W-30 Synthetic Engine Oil, Better Wear Protection, 5 Quart
Differential Oil
from
$14.49
(2)
DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
from
$11.99
This product is not rated
DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart
Differential Oil
What are the top-rated Infiniti QX4 Drivetrains?
Top-rated Drivetrains for your Infiniti QX4 based on customer reviews/ratings are:
from
$34.99
(18)
Uni-Fit C.V. Joint Boot Kit Outer greater than 3.58 In. Diameter
“Well built , with grease fittings. Good OEM alternative!! Recommend!!”
