Infiniti Q70L Fuel and Emissions Systems

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

• CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
• CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
• CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

CARQUEST’s line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and o-rings.

Product Features:

• Each unit is 100% tested to OE specifications.
• Includes new o-rings and seals made of premium OE quality materials.
• Includes application specific technical bulletin, where applicable.

Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.

Product Features:

• Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
• Direct Fit includes OE Connector for easy installation
• Performance meets or exceeds OE specifications
• True Direct-fit OE connectors and harness

Maximize your vehicle’s efficiency and emissions control with Carquest Vapor Canister Purge Solenoids. Engineered for precision, these solenoids seamlessly regulate the flow of fuel vapors from the Vapor Canister to the engine for cleaner combustion, reducing harmful emissions. Built to meet and/or exceed OEM standards, Carquest Purge Solenoids offer reliable functionality, long-lasting durability, and easy installation.

Product Features:

• Enhances overall engine performance by providing proper vapor flow to maintain correct air-fuel mixture.
• Helps reduce harmful emissions and ensures compliance with environmental regulations by controlling the release of fuel vapors into the engine
• Ensures precise operation with electromagnetic principles to control the flow of fuel vapors from the carbon canister to the engine
• Manufactured from high quality engineered materials, resistant to fuel vapors and extreme temperatures, ensuring long lasting performance
• Meets or exceeds all OEM specifications

DENSO Air/Fuel Ratio Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision-built for exact replacement and a first time fit. DENSO gives you the right part and the right fit.

Product Features:

• Specifically designed to meet the increasing demands of today’s engines
• 100 percent checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
• Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
• Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
• Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:

• Helps avoid premature fuel pump failure
• Lint free towel included
• Low suds formulation
• Removes harmful contaminants from the fuel tank

Recommended for replacement whenever the sending unit is serviced, this fuel tank sending unit lock ring securely retains the fuel pump assembly to the lock. Made of durable materials for reliable service.

Product Features:

• Direct replacement – this fuel tank sending unit lock ring is made to match the fit and performance of the original ring on specific vehicle applications
• Recommended for replacement whenever the sending unit is serviced, this fuel tank sending unit lock ring securely retains the fuel pump assembly to the lock
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Every single Delphi mass air flow (MAF) sensor that we manufacture – whether with or without the housing – is built with calibrated all-new components and is never remanufactured. Our mass air flow sensors are designed and tested to meet or exceed OE requirements, and engineered for a perfect fit in more than 180 million vehicles on the road today in North America – including makes from Ford, Toyota, Nissan, Volkswagen, Hyundai, BMW, Honda, GM, Mazda, Subaru, Acura and more.

Product Features:

• Delphi mass air flow sensors are the global benchmark for accuracy and signal noise
• Delphi mass air flow sensors feature high quality sensing elements for outstanding performance over a wide range of ambient temperatures
• Delphi is a manufacturer of OE mass air flow sensors since their first use over 30 years ago
• All parts are calibrated and tested to match the OE part
• Probe solution offered wherever possible to reduce repair time by eliminating the need to replace the flow tube
• Delphi OE technology validated to match the vehicle applications

Hitachi’s High Pressure Fuel Pumps (HPPs) are designed to enhance fuel volume delivery for exceptional operation and faster vehicle response. Our HPPs are a good alternative to the standard fuel pump for direct injection, supercharged, and turbocharged applications commonly found in todays vehicles. Pump housing is made of high strength aluminum to ensure durability while keeping weight low. Precision machined surfaces prevent fuel leakage/pressure drop while chemical resistant seals prevent premature wear from ethanol mixed fuels. Designed to meet the exact needs of each specific vehicle, Hitachi’s High Pressure Fuel Pumps are the premium choice. Hitachi is a Tier One OE supplier to the largest automobile manufacturers globally, delivering industry leading quality, and exceeding customer expectations with our products and service. Hitachi is bringing that same knowledge and expertise to the premium products we deliver in the Aftermarket because Quality Matters.

Product Features:

• These quality High Pressure Pumps provide exceptional operation with enhanced fuel volume delivery and faster vehicle response. Promotes a rise of fuel pressure from startup; reduces current consumption.
• Hitachi is a Tier 1 OE supplier for high pressure fuel pumps
• 100% NEW, never remanufactured
• Meets the OE performance and durability standards for this application
• High strength aluminum housing for light weight and durability
• Chemical resistant seals prevent premature wear from ethanol mixed fuels
• Precision machined surfaces prevent fuel leakage and subsequent pressure drop
• O-Ring/Gaskets included when applicable

Hitachis line of vehicle sensors are crucial to an efficiently operating vehicle. Whether is it an Automatic Transmission Speed Sensor, Crankshaft Angle Sensor, Camshaft Angle Sensor, Knock Sensor, Pressure Sensor, Temperature Sensor, Throttle Position Sensor, or Oil Level Sensor, you can rely on accurate readings and signals to be transmitted to your vehicles Electrical Control Unit (ECU) for an efficiently running system. Hitachi uses premium components and materials in the construction of all sensors extending the service interval of the product. Designed to meet the exact needs of each specific vehicle, Hitachis Sensors are the premium choice.

Product Features:

• Provides accurate measurement; reliable engine performance.
• 100% NEW, never remanufactured 

Pressure sensors are used within several operating systems on the vehicle. Subjects in this category measure the pressure of both liquid and air to include air in a positive pressure and negative pressure range. Pressure sensors report out as the result of an electrical device called a strain gauge which produces an analog or digital signal output dependent on the needs of the circuit. Pressures may be very low such as barometric pressure, or extremely high such as in a high-pressure fuel injection system.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
• Robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
• Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

This premium tool kit is designed to ensure the correct installation of the combustion seal on Gasoline Direct Injectors (GDI), which require replacement any time the injector is reinstalled. This special tool allows for the expansion of the combustion seal to allow installation onto the injector’s tip and resizing tools to provide precise dimensioning to ensure proper combustion sealing. Constructed of high-quality stainless steel the tool will provide years of trouble-free service and can be used on over 100 unique styles of GDI injectors.

Product Features:

• Includes two expansion cones
• Includes two resizing tools
• Includes one seal installation collet
• Includes hard case
• Includes instruction manual

Product Features:

• Passes all state and federal emissions tests
• Passes all state and federal emissions tests
• Manufactured from durable, long-life materials
• Reduces air pollution with proper sealing and venting
• Independently tested for emission control

Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:

• Passes all state and federal emissions tests
• Independently tested for emission control
• Independently tested for emission control
• Protects your fuel from theft and vandalism
• Reduces air pollution with proper sealing and venting
• Manufactured from durable, long-life materials

The temperature of various systems must be reported to the engine control module (ECM) as well as other operating system controllers in the vehicle. Coolant temperature, cabin temperature, exhaust temperature and ambient temperature are just a few systems reported by a temperature sensor. The temperature sensor is fed 5 volts by the systems computer, within the sensor housing will be a thermistor, or dropping resistor whose resistance value will change as the temperature surrounding it changes. Changing resistance in the circuit will change the volt signal at the processor indicating the current operating value.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
• Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
• Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
• Application matched components ensures system operation in like new condition.

Product Features:

• Provides closure for the EVAP system (normally vented) during OBD II test cycle
• Includes integrated filter, where applicable, that captures contaminants and particulates from incoming air, preventing clogging and ensuring clean airflow
• Quick valve response to engine demands, ensuring efficient venting of vapors and optimizing overall engine performance
• Meets or exceeds all OEM specifications

A malfunctioning vapor canister vent solenoid can cause the engine light to come on. This vapor canister vent solenoid is engineered of quality materials for durability to ensure proper operation of the vehicle’s evaporative emissions system.

Product Features:

• Direct replacement – this vapor canister vent solenoid fits and performs like original equipment with simple plug-and-play installation
• Quality construction – manufactured from premium materials for a long service life
• Excellent value – original equipment function at a lower price
• Quality tested – has undergone simulation and endurance testing to ensure proper fit and performance

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered and manufactured specifically for the repair environment
• Unsurpassed quality you can trust
• Validated for fit, form, and function

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

• BAR Certified adapters
• Adapter check’s a fuel cap’s ability to hold pressure.
• Adapters meet EPA standards for recommended fleet coverage.
• Check adapter application chart for specific makes and models

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

• BAR Certified adapters
• Adapter check’s a fuel cap’s ability to hold pressure.
• Adapters meet EPA standards for recommended fleet coverage.
• Check adapter application chart for specific makes and models

CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.

Product Features:

• Premium OE quality materials
• Services one injector

Product Features:

• Premium OE quality materials
• Includes upper o-ring
• Includes nylon split ring
• Includes combustion seal