Infiniti FX50 Engine Parts

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered for the sealing repair environment
• Unsurpassed quality you can trust
• Validated for fit, form, and function

Product Features:

• Resistant to temperatures from -58 Deg. F to 482 Deg. F, and briefly up to 572 Deg. F (-50 Deg. C to 250 Deg. C, briefly to 300 Deg. C)
• Insignificant shrinkage and loss of mass even in high-heat environments
• Fast-curing, low-odor, noncorrosive (pH neutral, non-acidic, non-oxidizing), and will not harm oxygen sensors
• Sealing gap 0.006 in (0.15 mm)

Product Features:

• Design type: spring loaded; multi-lip
• Temperature range: -20 Deg F to 300 Deg F / -29 Deg C to 49 Deg C
• Resistance to EP lubricants
• Low swell in hydrocarbon fluids
• Delivers quality and reliable performance for every type of repair

Value-priced seal meets all cataloged application requirements.

Product Features:

• Brand may vary by location

Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.

Product Features:

• Provides proper seal to ensure leak prevention
• Stops engine blow by
• High quality construction
• Meets all OEM specifications

DENSO’s camshaft position sensors are manufactured to the strictest OE standards resulting in unsurpassed reliability durability and detection accuracy. DENSO’s camshaft position sensors offer leading edge sensing technology which helps control ignition timing more precisely.

Product Features:

• OE technology adapted for the aftermarket
• Reduces emissions, increased performance
• Delivers the highest reliability and detection accuracy

Carquest Premium camshaft position sensors are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium crankshaft and camshaft sensors are engineered with technology that provides increased output accuracy through a stronger, more consistent signal. Our sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium crankshaft and camshaft position sensors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Engineered with technology that provides increased accuracy with a stronger, more consistent signal
• Sensors are based on proven hall effect and variable reluctance technology
• Includes OE-style brackets, hold downs, hardware, or spacers as needed for each application.
• O-rings and seals are included if required.
• Weather-tight connectors prevent leaks and corrosion for better reliability.
• Extensive design validation testing and 100% end-of-line tested.
• Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

Hitachi’s Variable Timing Control Cover Assembly is an aluminum cover that contains the Variable Timing Solenoid valve. This cover mounts to the engine’s Timing Chain Case Front Cover, which encapsulates the Variable Timing Gear (Camshaft Phasor). The Variable Timing Conntrol Assembly main function is to control oil pressure to the camshaft phasors (camshaft sprockets), which control the engine’s valve timing. The camshaft phasors (Variable Timing Gear) are mounted to the camshaft.

Product Features:

• Meets the OE performance and durability standards for this application
• Meets the OE performance and durability standards for this application
• Meets the OE performance and durability standards for this application
• Sprocket tooth profile designed to reduce wear and tear while increasing chain-to-tooth engagement
• Precision machined surfaces and ports create optimal flow passages and minimal friction for smooth operation
• Computer-aided balancing eliminates noise and vibration during operation

Hitachi’s Variable Timing Control Cover Assembly is an aluminum cover that contains the Variable Timing Solenoid valve. This cover mounts to the engine’s Timing Chain Case Front Cover, which encapsulates the Variable Timing Gear (Camshaft Phasor). The Variable Timing Conntrol Assembly main function is to control oil pressure to the camshaft phasors (camshaft sprockets), which control the engine’s valve timing. The camshaft phasors (Variable Timing Gear) are mounted to the camshaft.

Product Features:

• Meets the OE performance and durability standards for this application
• Meets the OE performance and durability standards for this application
• Meets the OE performance and durability standards for this application
• Sprocket tooth profile designed to reduce wear and tear while increasing chain-to-tooth engagement
• Precision machined surfaces and ports create optimal flow passages and minimal friction for smooth operation
• Computer-aided balancing eliminates noise and vibration during operation

Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:

• All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
• All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
• All threads and machined surfaces are and repaired with technology that exceeds the original metal
• Non-sealing iron surfaces painted to prevent oxidization

Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:

• All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
• All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
• All threads and machined surfaces are and repaired with technology that exceeds the original metal
• Non-sealing iron surfaces painted to prevent oxidization

DENSO’s crankshaft position sensors are manufactured to the strictest OE standards resulting in unsurpassed reliability durability and detection accuracy. DENSO’s crankshaft position sensors offer leading edge sensing technology which helps control ignition timing more precisely.

Product Features:

• OE technology adapted for the aftermarket
• Reduces emissions, increased performance
• Delivers the highest reliability and detection accuracy

Carquest Premium crankshaft position sensors are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium crankshaft and camshaft sensors are engineered with technology that provides increased output accuracy through a stronger, more consistent signal. Our sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium crankshaft and camshaft position sensors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Engineered with technology that provides increased accuracy with a stronger, more consistent signal
• Sensors are based on proven hall effect and variable reluctance technology
• Includes OE-style brackets, hold downs, hardware, or spacers as needed for each application.
• O-rings and seals are included if required.
• Weather-tight connectors prevent leaks and corrosion for better reliability.
• Extensive design validation testing and 100% end-of-line tested.
• Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

Anchor 9859 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 2007-2020
• Weight approx: 4 Lbs
• Hydraulic

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Design type: spring loaded; multi-lip
• Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
• Excellent high temperature capabilities
• Compatible with wide range of fluids
• Delivers quality and reliable performance for every type of repair

The variable valve timing (VVT) system allows the engine control module (ECM) to regulate the intake and exhaust valve phase angle providing the most optimal engine volumetric efficiency under all engine operating condition to control tailpipe emissions and engine efficiency. Variable valve timing is an emission control device and although there are various methods of operation, the typical device is regulated by oil control valves, actuator solenoids and camshaft phasers.

Product Features:

• Precision-wound coated copper windings increase product durability and life cycle.
• Hard-coated and anodized spool valve to prevent corrosion and increase service life.
• Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
• Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure product reliability, every time.
• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

Hitachi’s Variable Timing Control Cover Assembly is an aluminum cover that contains the Variable Timing Solenoid valve. This cover mounts to the engine’s Timing Chain Case Front Cover, which encapsulates the Variable Timing Gear (Camshaft Phasor). The Variable Timing Conntrol Assembly main function is to control oil pressure to the camshaft phasors (camshaft sprockets), which control the engine’s valve timing. The camshaft phasors (Variable Timing Gear) are mounted to the camshaft.

Product Features:

• Meets the OE performance and durability standards for this application
• Meets the OE performance and durability standards for this application
• Additional O-ring located in the solenoid housing prevents water from damaging electrical components
• Optimally designed electromagnet requires less energy to maintain operating positions
• Precision machined ports and high-quality seals create less pressure drop
• Hitachi’s Variable Timing Solenoid (VTSs) precisely regulate oil flow to the Variable Timing Gear to allow the engine to adjust timing for optimal performance and fuel economy. Our VTS have a(n) optimally designed electromagnet(s) requiring less energy to

Building upon a foundation of premium full-line products established under NGK ignition and oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. is the only OE supplier with a full line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

• NTK’s Variable Valve Timing Solenoids are manufactured to meet and/or exceed OE fit, form and function to ensure proper VVT operation.
• The VVT solenoids meets the demands of today’s VVT engines at both low and high RPMs.
• The VVT solenoids include a hard-coat anodized spool valve to prevent corrosion and increase service life.
• The VVT solenoids include precision-wound, coated-copper windings to increase solenoid longevity.
• The VVT solenoids are manufactured with a high strength thermoplastic that is resistant to temperature, moisture, and chemicals.
• The VVT Solenoids are manufactured to precise OE valve body dimensions and utilizes fluorocarbon O-rings to help prevent oil leakage.
• The VVT Solenoids are 100% tested and inspected to ensure consistent quality with end of production tested in oil to be sure the valve is primed and will work properly upon installation.

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered for the sealing repair environment
• Validated for fit, form and function
• Unsurpassed quality you can trust
• Includes all the parts necessary to complete the repair unless otherwise noted

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

• Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:

• Matches OE form, fit and function
• High quality rubber designed to keep water and dirt out
• Quality construction for fitment
• Designed for under vehicle environment
• Application specific for this vehicle

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• RIGHT TYPE – Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
• QUALITY MATERIALS – Each valve stem seal features materials based on the specific application for your vehicle repair
• ENGINEERING EXPERTISE – Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
• INSTALLATION AID – Installation tool included to protect inner lip of seal from damage during seal installation
• COVERAGE – Available for domestic and foreign nameplate vehicles