Infiniti Engine Cold Air Intakes

The K&N 69-7081-1TS Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Infiniti G35 models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smooths and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine’s RPM range. Air is directed through the intake tube into the engine’s throttle body for a guaranteed power gain. The intake tube has an attractive silver powder-coat finish that’s made to last and it accommodates the factory mass air sensor and crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, pliers, ratchet set and an Allen wrench. ach vehicle and air intake.

Product Features:

• Guaranteed to increase horsepower
• Designed to improve throttle response and engine sound
• Free-flowing aluminum tube
• Easy to install, usually in 90 minutes or less
• Lasts up to 100,000 miles before service is required (depending on driving conditions)
• Replaces entire factory air intake system
• Washable and reusable lifetime air filter
• K&N Million Mile Limited Warranty

Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media.

Product Features:

• Guaranteed to increase horsepower and torque.
• Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter.
• Engineered to provide high airflow and exceptional filtration.
• Replaces factory air filter and intake tube.
• Filter only requires cleaning every 100,000 miles under normal highway driving conditions.
• Typical installation can be completed in 60 minutes or less with simple hand tools.
• No-Hassle Lifetime Limited Warranty.
• Will not void vehicle warranty(limited)

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.

Product Features:

• Guaranteed to increase horsepower and torque
• Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
• Engineered to provide high airflow and exceptional filtration
• Replaces factory air filter and intake tube
• Filter only requires cleaning every 100,000 miles under normal highway driving conditions
• Typical installation can be completed in 60 minutes or less with simple hand tools
• No-Hassle Lifetime Limited Warranty
• Will not void vehicle warranty(limited)

Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media.

Product Features:

• Guaranteed to increase horsepower and torque.
• Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter.
• Engineered to provide high airflow and exceptional filtration.
• Replaces factory air filter and intake tube.
• Filter only requires cleaning every 100,000 miles under normal highway driving conditions.
• Typical installation can be completed in 60 minutes or less with simple hand tools.
• No-Hassle Lifetime Limited Warranty.
• Will not void vehicle warranty(limited)

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

Product Features:

• Guaranteed to increase horsepower and torque
• Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
• Engineered to provide high airflow and exceptional filtration
• Replaces factory air filter and intake tube
• Filter only requires cleaning every 100,000 miles under normal highway driving conditions
• Typical installation can be completed in 60 minutes or less with simple hand tools
• No-Hassle Lifetime Limited Warranty
• Will not void vehicle warranty(limited)

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.

Product Features:

• Guaranteed to increase horsepower and torque
• Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
• Engineered to provide high airflow and exceptional filtration
• Replaces factory air filter and intake tube
• Filter only requires cleaning every 100,000 miles under normal highway driving conditions
• Typical installation can be completed in 60 minutes or less with simple hand tools
• No-Hassle Lifetime Limited Warranty
• Will not void vehicle warranty(limited)

Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake comes with a red Spectre reusable low restriction air filter, high quality polished aluminum tubing and a black powder coated heat shield (where applicable) to help prevent engine air from entering the intake inlet. Spectre air intakes come with the necessary boots, clamps and hardware for an OE fit and finish.

Product Features:

• DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
• BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
• IMPROVED ENGINE SOUND: Hear the power under the hood
• WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
• EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
• EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
• HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
• Will not void vehicle warranty(limited)

Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media.

Product Features:

• Guaranteed to increase horsepower and torque.
• Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter.
• Engineered to provide high airflow and exceptional filtration.
• Replaces factory air filter and intake tube.
• Filter only requires cleaning every 100,000 miles under normal highway driving conditions.
• Typical installation can be completed in 60 minutes or less with simple hand tools.
• No-Hassle Lifetime Limited Warranty.
• Will not void vehicle warranty(limited)

Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media.

Product Features:

• Guaranteed to increase horsepower and torque.
• Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter.
• Engineered to provide high airflow and exceptional filtration.
• Replaces factory air filter and intake tube.
• Filter only requires cleaning every 100,000 miles under normal highway driving conditions.
• Typical installation can be completed in 60 minutes or less with simple hand tools.
• No-Hassle Lifetime Limited Warranty.
• Will not void vehicle warranty(limited)

Takeda Intake System

Five Layer Performance Air Filters:These 360-degree radial flow air filters feature our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. They provide your engine with the largest amount of high-flowing air, usually resulting in the highest power gains out of all our filter media options. This media is perfect for street and/or track use. Their inverted bullet-style tops makes for more filter surface area, resulting in longer service intervals.One-Piece Housings:The included performance air filters are surrounded by open-element XLPE polymer (cross-linked polyethylene) housings that minimize warm engine air for maximum performance. The open design allows for easy viewing of the air filter, yet blocks out heat when the hood is closed. They utilize the vehicle’s OE air inlets with no additional hardware.Dyno-Tuned Intake Tubes:This system features high quality, computer-designed, dyno-tuned intake tubes to achieve maximum power gains while maintaining a perfect fit. Their XLPE material is heat soak resistant and extremely durable.Hassle-Free Installation:The computer designed system utilizes factory mounting locations, minimizing the use of unnecessary hardware and ensuring a perfect fit every time. Its innovative design makes for a hassle-free, direct bolt-on installation process that requires no cutting or drilling. It features our patent pending filter-to-housing interface that uses half the number of parts of a traditional cold air intake system.

Product Features:

• Outflows Factory Intake by 36%
• Washable and Reusable Pro 5R Air Filters for Maximum Performance
• Integrates Factory Air Scoops with No Additional Hardware
• Open-Element Design Allows for Viewing of Air Filters, Yet Keeps Out Hot Air When Hood is Closed

Huge 3-Layer Performance Air Filter: The Momentum GT intake is designed around an oil-free, large 9″ oval 360 degree radial flow performance air filter with 3-layers of progressive finer porosity synthetic media providing maximum convenience. The unique air filter to housing interface (patent pending) allows for maximum filter size which increases the available air volume while simplifying the installation process. The air filter is wrapped in reinforced metal providing maximum strength to prevent filter collapse. Unique One-Piece High Quality Housing W/ Sight Window: A custom CAD designed roto-molded housing made from heat resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the air box. The roto-molded housing is made out of black cross-linked polyethylene. A urethane plug is also included if you wish to completely seal the auxiliary air scoop. High Quality Tube: This system uses a high quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. This tube has a built-in resonance chamber to catch un-wanted air intake noises. Premium Hardware: Premium stainless steel clamps and a silicone coupling are used for strength and durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation. Emissions Disclaimer: This product does not require a CARB EO# (Vehicle does not exist in U.S.)

Product Features:

• High-Quality One-Piece Sealed Housing with Auxiliary Air Scoop
• Unique (Patent Pending) Housing-to-Filter Interface for Easy Installation
• Built-In Sight Window Provides Easy Inspection of Filter Without Disassembly
• Washable and Reusable Pro DRY S Air Filter for Maximum Convenience

The AEM-21-774DS Performance Cold Air Intake System produces horsepower And torque gains by replacing your vehicle’s restrictive factory air filters And air intake housings. This air intake system was designed, tuned And dyno-tested to fit select Infiniti Q50 models. Air enters the system through dual AEM Dryflow synthetic washable air filters for outstanding air flow, filtration And performance. The air filters are located in the original air box spaces And are protected by heat shields which are designed to reduce intake air temperature And increase horsepower. Air is then fed to the engine through not one, but two air intake tubes. This air intake system was developed to accommodate the engine’s factory emissions control devices including the mass air flow sensors And crankcase vent tube. The dual tapered cylinder shaped AEM Dryflow air filters are made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools And it is backed by AEM’s Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California And other states adopting California emission standards while others are 50 state legal. View the 21-774DS vehicle applications to determine the legal status for each vehicle.

Product Features:

• Product might not be available in all states due to local laws.

The AEM 21-8502DC Brute Force Air Intake System produces horsepower And torque gains for high displacement engines by replacing the vehicle’s restrictive factory air filter And air intake housing. This air intake system was designed, tuned And dyno-tested to fit specific Nissan Titan, Armada And Pathfinder as well as Infiniti QX56 models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration And performance. The air filter is located in the original air box space And is protected by a heat shield which is designed to reduce intake air temperature And increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine’s factory emissions control devices including the mass air flow sensor And two replacement silicone breather hoses. The cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM’s Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California And other states adopting California emission standards while others are 50 state legal. View the 21-8502DC vehicle applications to determine the legal status for each vehicle.

Product Features:

• Estimated Horsepower Gain: 17.9 HP @ 3750 RPM
• Replacement Filter: 21-2109DK
• Increased horsepower
• Tuned and dyno-tested to improve acceleration and engine sound
• Low restriction aluminum tubing
• Air filter lasts up to 100,000 miles before cleaning is required (depending on driving conditions)
• Washable and reusable oil-free filter media
• AEM Lifetime Limited Warranty

The AEM 21-807C is designed to replace the restrictive air filter And airbox of specific Infiniti Q50 models. The oversized oval-shaped AEM Dry Flow filter is made from an oil-free, synthetic filter media And can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The AEM heatshield replaces the restrictive factory airbox, And uses the factory engine cover as it’s top cover. To create a seal between the AEM heatshield/airbox And engine cover a rubber edge trim is included. The air intake system is backed by AEM’s Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California And other states adopting California emission standards, while others are 50 state legal. View the 21-807C vehicle applications to determine the legal status for each vehicle.

Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

Product Features:

• Guaranteed to increase horsepower and torque.
• Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter.
• Engineered to provide high airflow and exceptional filtration.
• Replaces factory air filter and intake tube.
• Filter only requires cleaning every 100,000 miles under normal highway driving conditions.
• Typical installation can be completed in 60 minutes or less with simple hand tools.
• No-Hassle Lifetime Limited Warranty.
• Will not void vehicle warranty(limited)

Bringing you the next generation of intakes, the Momentum GT sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This intake system is superior in every way. From the one-piece sealed housing with a tire tread top, to the massive air filter and premium hardware, we spared no expense to give you the best intake on the market.

Product Features:

• Pro 5R Filter Media
• 5-Layer Progressive Cotton Gauze Media
• Washable And Reusable
• Huge 5 in. Flange w/Inverted Top Air Filter

Takeda Intake System