Hummer H2 Automatic Transmission Parts

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• Protective outer coverings help provide long-lasting durability
• Color-coded wires allow for easy installation
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

AUTO TRANS BAND

Fixing a broken automatic transmission shift cable usually requires replacing the entire cable assembly. This 2-piece assortment of Dorman OE FIX bushings saves expense by allowing the replacement of just the failed bushing.

Product Features:

• Convenient solution – this shift cable bushing assortment directly replaces a broken bushing and eliminates the need to replace the entire cable assembly
• Save time and money – save the expense and significant installation time of replacing an entire cable assembly
• Ensure fit – this bushing assortment is vehicle-specific and precision-engineered for specified General Motors, Chrysler and Saab models and years
• Trustworthy quality – designed in the United States and backed by more than a century of automotive aftermarket excellence

ATP Automatic Transmission Control Solenoid (Lock-Up)

ATHARNESS VSS REPR

At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.

Product Features:

• Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
• All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
• During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
• All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
• Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
• No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
• Product might not be available in all states due to local laws.

All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required. All of friction components are replaced with upgraded heavy duty parts. Drum assemblies are air checked and side play is checked to assure proper clearance. All of seals, o’rings and gaskets are replaced. All of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valve body valves and valve bores are inspected and valve bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing. Transmissions are assembled, end plays are set and fasteners are torqued to the required specification. All of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno test. Transmission park locking mechanism is checked during dyno test. (where applicable). (Torque Converter) All of converters are dynamic balanced. All of pumps are furnaced brazed. All new bearings and o’rings. All new springs and rollers in stator. All new thrust washers. All new friction liners in overdrive lockup converters. Converter endplay and hub/pump runout and diameter is checked.

Product Features:

• All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required.
• 100% of friction components are replaced with upgraded heavy duty parts.
• Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, o’rings and gaskets are replaced.
• 100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear.
• Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
• Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and o’rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
• 100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno

All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required. All of friction components are replaced with upgraded heavy duty parts. Drum assemblies are air checked and side play is checked to assure proper clearance. All of seals, o’rings and gaskets are replaced. All of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valve body valves and valve bores are inspected and valve bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing. Transmissions are assembled, end plays are set and fasteners are torqued to the required specification. All of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno test. Transmission park locking mechanism is checked during dyno test. (where applicable). (Torque Converter) All of converters are dynamic balanced. All of pumps are furnaced brazed. All new bearings and o’rings. All new springs and rollers in stator. All new thrust washers. All new friction liners in overdrive lockup converters. Converter endplay and hub/pump runout and diameter is checked.

Product Features:

• All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required.
• 100% of friction components are replaced with upgraded heavy duty parts.
• Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, o’rings and gaskets are replaced.
• 100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear.
• Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
• Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and o’rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
• 100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno
• Product might not be available in all states due to local laws.

Our Remanufactured Transmissions include torque convertors, trans is completely disassembled & checked then reassembled to spec for tolerances, vacuum, seal & balance, all wear parts replaced & sim tested.

Product Features:

• Our Remanufactured Transmissions include torque convertors, trans is completely disassembled & checked then reassembled to spec for tolerances, vacuum, seal & balance, all wear parts replaced & sim tested.
• If we have important installation information it will be included on tags or in the paperwork packaged with your transmission.
• Transmissions are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
• All of our transmissions are Dyno tested to ensure the highest standard of trouble free service and longevity.
• With Mobil 1 Fluid

Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road.

Product Features:

• Product might not be available in all states due to local laws.
• We are committed to remanufacturing transmissions to the same stAndards And methodologies used for OEM transmissions
• Each Moveras transmission is produced in a World Class manufacturing facility
• Our entire process has been developed from scratch, utilizing LEAN manufacturing principles
• Our transmissions are produced in a Clean Room environment
• Every transmission is built to the same exacting standards by using a precisely documented and controlled process.

An automatic transmission is a hydraulic multi-speed device that does not require any input from the vehicle operator other than selecting vehicle direction. Hydraulic pressure is controlled by a series of electronic shift solenoids that are commanded by the transmission control module. Planetary gear sets and hydraulically controlled shift plates and brake bands apply power to the main shaft in the transmission and out to the vehicles drive wheels.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• Precision-wound coated copper windings increase product durability and life cycle.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure product reliability, every time.

Pro-King is the leading supplier of transmission and driveline products in the aftermarket. All products are designed to meet or exceed OE quality, form, fit and funtion.

Product Features:

• OE Replacement

AT CONTR SOLENOID

Pro-King is the leading supplier of transmission and driveline products in the aftermarket. All products are designed to meet or exceed OE quality, form, fit and funtion.

Product Features:

• Quick Link Splice Connectors

This Dorman OE FIX remanufactured transmission electro-hydraulic control module (TEHCM) provides the same function and performance as the stock component, and features upgraded plastic to increase durability against heat and debris.

Product Features:

• Aftermarket exclusive – this uniquely remanufactured TEHCM features upgraded PEEK plastic to resist heat and debris and extend its lifespan
• Cost-effective fix – module is equally compatible as original but far less expensive than replacement from dealership
• Quality assured – this part underwent vehicle simulator testing, and includes new gaskets, grommets and seals
• Requires programming – after installation, module must be programmed with original manufacturer software, such as through a Remote Assist Programming (RAP) Kit
• Cost-effective fix – module is equally compatible as original but far less expensive than replacement from dealership

Shift Solenoid