Hummer H2 Ignition and Tune-Up Products
Top Hummer H2 Ignition and Tune-Up Products Categories
We carry over 119 Ignition and Tune-Up Products in inventory for the Hummer H2. If you’re looking for aftermarket Ignition and Tune-Up Products for your Hummer H2, check out all these categories:
Essential Hummer H2 Ignition and Tune-Up Products
Delphi – Knock Sensor (Part No.AS10017)
from
$71.99
Manufactured to meet or exceed OE requirements; Delphi Knock Sensors help maximize engine performance with all fuels; Delphi Knock Sensors prevent against engine damage from pre-ignition knocking.
Product Features:
See More
Product Features:
- Delphi knock sensors help maximize engine performance with all fuels
- Delphi knock sensors prevent against engine damage from pre-ignition knocking
- Calibrated for a wide variety of frequencies to detect shifts, and adjust to provide accurate signals to help maximize engine performance
- Flat frequency response allows the same sensor to be used on different engines and the sensor responds to knock frequencies higher than the primary frequency
- Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference (EMI)
- Self-generating piezoelectric design requires no power to the sensor
GM Genuine Parts – Fuel Injection Fuel Rail Bolt (Part No.12554211)
from
$9.99
GM Genuine Parts Studs are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
DENSO – PT16TT Platinum TT Spark Plug (Part No.4511)
Carquest Premium – Ignition Switch (Part No.CSA1116)
from
$42.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
ACDelco – Original Equipment Ignition Wire (Part No.F1030575906ACD)
from
$22.14
Built to match the original equipment in length and fit, ACDelco OES Ignition Wires offer a performance advantage over many aftermarket products.
Product Features:
See More
Product Features:
- ACDelco ignition wires are designed to be like Original in critical areas such as cable length and diameter, terminal design and insulator position
- Have broad coverage available for most vehicles on the road today from 1980 to present
- Provide a high degree of Radio Frequency Interference (RFI) suppression
- Are designed to offer fit, form and function for optimum performance
- Kevlar reinforced fiberglass core in select sets for increased strength
- Core sheathed in radio-static absorbent material for increased RFI suppression
- Wire-wound, stainless steel alloy conductor for maximum spark delivery and RFI suppression on most applications
- A layer of conductive heat-resistant latex for added durability
- Insulating rubber-based compound inner jacket helps minimize voltage drop and enhance durability
- Thick silicone outer jacket for excellent heat resistance
- Limited lifetime warranty*
Dorman – GM Panel Retainer (Part No.963-021D)
from
$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Idemitsu – Power Steering Fluid – 12 oz (Part No.30102-052A)
from
$6.29
IDEMITSU Premium PSF is specifically engineered to meet the demanding performance requirements of Honda and Acura power steering units. This advanced technology fluid is formulated with premium quality base oils and the latest additive technologies to provide outstanding protection and performance under the most servere environmental and driving conditions.IDEMITSU Premium PSF can also be used in most Asian Original Equipment Manufacturer (OEM) power steering units that do not utilize electronic power steering technology.
Product Features:
See More
Product Features:
- Unique friction technology provides efficient and noise-free operation
- Advanced formulation technology provides outstanding protection to the entire power steering system while delivering smooth performance under the most severe operating conditions
- Superior low temperature performance for easy flow and protection against cavitation and elimination of “squawking” and “squealing”
- Excellent compatibility with seals, gaskets and internal components to reduce the potential for leaks and ensures smooth performance over extended intervals
- Robust anti-wear and inhibitor chemistry provides enhanced component and fluid durability and long-life
Carquest – A/C Compressor Connector (Part No.PT770)
from
$16.05
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.
Product Features:
See More
Product Features:
- Our knock sensors are designed to respond to knock frequencies up to 1000 Hz accommodating shifts in engine knock frequency making it a more flexible sensor responding to correct engine knock over a broad range of vehicle conditions
- Manufacturing processes include an automated data acquisition system to continuously monitor the sensor output to ensure that it responds with appropriate voltage output at the specified frequency range
- All units are 100% tested using an accelerometer vibration test to ensure trouble-free operation
- Featuring the broadest sensor coverage in the market, we meet the service professionals needs with the highest quality product every time he opens the box
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
Accel – Coil:GM Ls2 Ls3 Ls7 (Part No.140043)
from
$79.99
ACCEL Super Coils feature advanced bobbin technology, highly specialized silicon magnetic steel cores, optimized windings, proper resistance and engineered turn ratios that deliver a high performance, quality coil. Specialized high temperature epoxy resists shock and vibration, while increasing thermal conductivity. These are direct high performance replacements for OEM coils.
Product Features:
See More
Product Features:
- These coils feature advanced bobbin technology.
- Highly specialized silicone magnetic steel cores with optimized windings
- Specialized high temperature epoxy filled housings resists shock, vibration, chemicals, and overall engine bay environment.
- These are a direct performance bolt on upgrade.
- The ACCEL bodies are molded in a high dielectric strength material.
ACDelco – Spark Plug Wire Set (Part No.748RR)
from
$145.99
ACDelco GM Original Equipment Spark Plug Wire Sets consist of a set of wires, encased in an insulating material, connectors, and insulating boots, and are GM-recommended replacements for your vehicle’s original components. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plug. These original equipment wires have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Durable to help transfer high voltage pulses without damage
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Carquest Premium – Exhaust Gas Recirculation (EGR) Vacuum Regulator Solenoid Connector (Part No.PTA1107)
from
$24.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
NGK – NGK Wire Set (Part No.51033)
from
$67.99
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding
Product Features:
See More
Product Features:
- PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
- BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
- STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
- CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
ACDelco – Ignition Coil Wire (Part No.356G)
from
$87.99
ACDelco GM Original Equipment Ignition Coil Lead Wires are induction coils in a vehicle’s ignition system that send power from the battery through the spark plugs to ignite the fuel in the engine cylinders, and are GM-recommended replacements for your vehicle’s original components. These original equipment ignition coil lead wires have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Insulated to help protect the interior conductor wire
- Form fitting boots on each end prevent moisture from entering the coil or distributor
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Accel – Coil:GM Ls2 Ls3 Ls7 8-Pack-Black (Part No.140043K-8)
from
$628.99
Now you can have ACCEL late model Supercoils in additional colors
Product Features:
See More
Product Features:
- These coils feature advanced bobbin technology.
- Highly specialized silicone magnetic steel cores with optimized windings
- Specialized high temperature epoxy filled housings resists shock, vibration, chemicals, and overall engine bay environment.
- These are a direct performance bolt on upgrade.
- The ACCEL bodies are molded in a high dielectric strength material.
Accel – Coil:GM Ls2 Ls3 Ls7 8-Pack (Part No.140043-8)
from
$519.99
ACCEL Super Coils feature advanced bobbin technology, highly specialized silicon magnetic steel cores, optimized windings, proper resistance and engineered turn ratios that deliver a high performance, quality coil. Specialized high temperature epoxy resists shock and vibration, while increasing thermal conductivity. These are direct high performance replacements for OEM coils.
Product Features:
See More
Product Features:
- These coils feature advanced bobbin technology.
- Highly specialized silicone magnetic steel cores with optimized windings
- Specialized high temperature epoxy filled housings resists shock, vibration, chemicals, and overall engine bay environment.
- These are a direct performance bolt on upgrade.
- The ACCEL bodies are molded in a dielectric high-strength material.
- 8 Pack
Dorman – Help – Knock Sensor Grommet (Part No.42003)
from
$14.99
This ignition knock (detonation) sensor seal is designed to match the fit and function of the original seal on specified vehicles, and is engineered for durability & reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this ignition knock (detonation) sensor seal is designed to match the fit and function of the original seal on specified vehicles.
- Restores functionality – reliable replacement for an original part that is leaking or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Knock Sensor And Harness Kit (Part No.926-084)
from
$94.99
Check engine light on and vehicle running rough? Could be a failed knock sensor. This ignition knock sensor kit combines both necessary sensors and the wiring harness that joins them for a complete repair in one package.
Product Features:
See More
Product Features:
- Complete solution – this knock sensor kit includes two knock sensors and the wiring harness that connects them
- Plug-and-play installation – matches original wiring harness, requiring no cutting or splicing
- Quality assured – benchmarked against original components for performance and quality
- Excellent value – original equipment quality at significant cost savings
Carquest Premium – Engine Crankshaft Position Sensor Connector (Part No.PTA1136)
from
$69.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
ACDelco – Specific FitSpark Plug Wire Set: Fiberglass Reinforced Latex Graphite Core (Part No.9748GG)
from
$102.99
ACDelco Professional Spark Plug Wire Sets consist of a set of wires, encased in an insulating material, connectors, and insulating boots, and are a high quality replacement for many vehicles on the road today. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plugs. These premium aftermarket replacement components are manufactured to meet your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
ACDelco – Spark Plug Wire Set (Part No.748UU)
from
$132.99
ACDelco GM Original Equipment Spark Plug Wire Sets consist of a set of wires, encased in an insulating material, connectors, and insulating boots, and are GM-recommended replacements for your vehicle’s original components. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plug. These original equipment wires have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Durable to help transfer high voltage pulses without damage
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
DENSO – Spark Plug Wire Set: Aluminum Steel Core, 8 Wire Set (Part No.671-8062)
from
$72.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.
Product Features:
See More
Product Features:
- Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
- Identical OE end caps are designed to “click” into place for easy installation and a secure fit
- Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
ACDelco – Gray Multi-Purpose Pigtail (Part No.PT2655)
from
$72.99
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Protective outer coverings help provide long-lasting durability
- Color-coded wires allow for easy installation
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Hummer H2 Ignition and Tune-Up Products Categories
Helping You Find the Right Ignition and Tune-Up Products for Your Hummer H2
You love your H2. So we’ve made it easier than ever to help you find Hummer H2 Ignition and Tune-Up Products in our online catalog. Our inventory holds 119 aftermarket and OEM Ignition and Tune-Up Products for your Hummer H2, ranging from $2.99 to $991.99.
We offer parts from 18 brands trusted to make quality Ignition and Tune-Up Products for your Hummer H2. Before you buy, take some time to read through customer reviews. We currently have 10,125 reviews of Hummer H2 Ignition and Tune-Up Products from previous customers. Some of the top rated parts include Spark Plug Wire Set: 8 Wires, Increased performance, Designed for direct fit with 4.6 stars and Spark Plug Wire Set: 8 Wires, Increased performance, Designed for direct fit with 4.7 stars.
Find your H2 Ignition and Tune-Up Products here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Hummer H2 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Ignition and Tune-Up Products Brands for Your Hummer H2
Our inventory holds Ignition and Tune-Up Products for your Hummer H2 from 18 trusted brands. You’ll find OEM and aftermarket parts from brands like ACDelco, NGK, and Autolite, all of which can keep that Hummer happy.
We have Motorcraft parts available for your Hummer H2 in categories like Spark Plugs. Some of the top-rated Motorcraft parts in these categories are:
Top-Rated ACDelco Ignition and Tune-Up Products
Leading ACDelco Ignition and Tune-Up Products
We carry ACDelco brand parts for your Hummer H2 across several catalog categories, including Spark Plugs and Ignition Coils and Boots. Some of our most reviewed ACDelco parts include:
from
$124.99
(139)
Spark Plug Wire Set: Fiberglass Reinforced Latex Graphite Core
Ignition Coil Boots
FAQs for Hummer H2 Ignition and Tune-Up Products
What are the most purchased Ignition and Tune-Up Products for the Hummer H2?
Out of 119 Ignition and Tune-Up Products for the Hummer H2, the most popular in our inventory are:
from
$11.99
This product is not rated
Iridium Spark Plug: Original Equipment Replacement
Spark Plugs
What are the top-rated Hummer H2 Ignition and Tune-Up Products?
Top-rated Ignition and Tune-Up Products for your Hummer H2 based on customer reviews/ratings are:
from
$73.99
(160)
Spark Plug Wire Set: 8 Wires, Increased performance, Designed for direct fit
“Right fit”
from
$80.99
(146)
Spark Plug Wire Set: 8 Wires, Increased performance, Designed for direct fit
“The fit and work just happened to blow my transmission 😂😂😂”
from
$3.49
(117)
Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration
“Good seller”
