Hummer H2 Air Intakes

GM Genuine Parts Fuel Injection Throttle Body Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These seals help provide an air- and liquid-tight connection between throttle body components, and are GM-recommended replacements for your vehicle’s original components. Replace this seal whenever you service the throttle body. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• Helps prevent excess air form entering the intake
• Helps seal the intake and throttle from the elements
• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the manufacturer.
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the manufacturer.
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

AIRAID Modular Intake Tubes (MIT) provide a smooth air way to the throttle body that improves air flow up to an additional 400 CFM over restrictive stock intake tubes in order to give your engine more horsepower And torque. MITs are constructed from cross-linked, high-density polyethylene, built each for a specific vehicle make And model, And can be used to simply replace your stock air intake tube or can be added to an AIRAID Cold Air Dam QuickFit series system. Installation is easy And can be done in only a few minutes with a few simple tools. Mounting hardware is included along with easy-to-follow instructions. Some AIRAID air intake components are not legal for sale or use in California And other states adopting California emission standards, while others are 50 state legal. View the product’s vehicle applications to determine the legal status for each vehicle.

Product Features:

• Installs In Minutes
• Works Great w/Airaid Premium Filters
• Complete w/Premium Hardware
• Purchase In Stages Or All Together
• Enhanced Fuel Efficiency
• Up To 400 cfm Over Restrictive Stock Intake Tubes
• Lifetime No Hassle Warranty(limited)

Product Features:

• Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
• Aluminized steel carrier with FKM molded rubber
• Compression limiters to prevent overtightening
• Superior sealing characteristics to competing designs

Product Features:

• Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
• For those who demand the maximum durability and reassurance of steel carrier gasket designs, Victor Reinz offers a broad range of MaxDry STL gaskets.
• It is critical that the molded rubber sealing areas resist all the possible fuels, coolants and oil formulations used in these vehicles. Victor Reinz engineers have utilized only premium grade FKM synthetic rubber for this purpose.
• Coverage includes GM, Ford, Toyota, Nissan, and Mazda vehicles.

Hitachi’s Electronic Throttle Bodies (ETBs) are designed to provide extraordinary accuracy with quick response times. High quality materials ensure that even under the most extreme conditions, Hitachi’s ETBs will not deform or malfunction. Precision Throttle Position Sensor (TPS) Circuitry maintains accurate engine mapping resulting in optimal fuel economy and performance with the lowest possible emissions. Details such as internal gear sizes, tooth count, materials, and protected circuitry provide a durable and reliable product. Designed to meet the exact needs of each specific vehicle, Hitachi’s electronic throttle bodies are the premium choice.

Product Features:

• Advanced throttle position sensor technology ensures smooth idle conditions and precise air flow metering
• Advanced throttle position sensor technology ensures smooth idle conditions and precise air flow metering
• 100% NEW, never remanufactured
• Precision TPS Circuitry maintains accurate engine mapping; Pemium componentry allows for extended durability; Tailored for each vehicle to reduce install times.
• These quality Electronic Throttle Bodies feature precise throttle opening, improved fuel economy and reduced emissions.
• Powerful electric motor provides quick and accurate response for optimal engine efficiency
• Electronics are sealed to prevent contamination that may result in inaccurate readings
• Detailed manufacturing tracking system using QR codes

This electronic throttle body module is a reliable direct replacement for the original equipment module on specific vehicles. It is thoroughly tested to restore proper performance.

Product Features:

• Direct replacement – this throttle actuator control module directly replaces the original module on certain vehicle applications
• Effective fix – this module restores proper throttle body operation to ensure maximum efficiency
• Durable materials – high-grade electronic components withstand extreme temperature fluctuations to prevent future failures
• Trustworthy quality – backed by team of engineers in the United States

GM Genuine Parts Fuel Injection Throttle Bodies are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These throttle bodies are located on the intake manifold, and contain the throttle plate(s) that control the air entering the engine. The throttle body also houses the fuel injector(s) on Throttle Body Injection (TBI) or Central Fuel Injection (CFI) systems. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
• Helps provide air flow for proper fuel/air mixture
• Allows for a quick throttle response
• Assists in cold engine starts
• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
• GM engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies

GM Genuine Parts Fuel Injection Throttle Bodies are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These throttle bodies are located on the intake manifold, and contain the throttle plate(s) that control the air entering the engine. The throttle body also houses the fuel injector(s) on Throttle Body Injection (TBI) or Central Fuel Injection (CFI) systems. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• This part requires programming andor special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
• Helps provide air flow for proper fuelair mixture
• Allows for a quick throttle response
• Assists in cold engine starts
• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
• GM engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
• Quality material – this retainer is made of durable material for long-lasting service
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
• Quality material – this retainer is made of durable material for long-lasting service
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost

This engine intake manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It is thoroughly tested to ensure top-quality OEM construction and superior reliability.

Product Features:

• Ideal replacement – this intake manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
• Reliable construction – tested to ensure top-quality OEM performance and durability
• Perfect fit – designed to match all specifications of the original part for convenient, trouble-free installation
• Trustworthy design – built by the industry leader in aftermarket manifolds

Product Features:

• Maximum performance race design with hood clearance consideration
• Lighter than other split race intakes
• Split feature making porting efforts easy!
• 33 to 50% the price of other split race intakes
• Captured O-ring seals at head ports and split
• Vacuum Port options include (2) 1/8, (1) 1/4, and (1) 3/8, NPT ports at the carb flange
• Billet Fuel Rails and rail mounting hardware included.

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered and manufactured specifically for the repair environment
• Unsurpassed quality you can trust
• Validated for fit, form, and function

The Throttle Position Sensor (TPS) reports the angle of the throttle plate and thus the engine air intake to the ECM for optimal engine operation under all engine load conditions. Located on the throttle body, a failed Throttle Position Sensor may result in poor engine performance including stalling, hesitation, rough idle, increased fuel consumption, unnecessary stress on the emissions system and check engine light illumination.

Product Features:

• OE MATCH: Throttle Position Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper feedback to the ECU to control engine performance.
• THE DIFFERENCE: Magnet size and strength optimized for precise output signal. 100% thermo-shock and vibration tested to ensure the best performance in extreme conditions.

This throttle position sensor is designed to match the fit and function of the original sensor on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this throttle position sensor is designed to match the fit and function of the original sensor on specified vehicles
• Ideal solution – this sensor is a reliable replacement for an original part that has failed due to fatigue or electrical malfunction
• Durable construction – this sensor is made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Carquest Throttle Position Sensors offer precision signaling to the ECM to ensure optimum performance and fuel economy. Manufactured using the highest quality OEM approved materials, resulting in tighter tolerances and increased durability. All Carquest Throttle Position Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

• Manufactured to provide superior sealing, protecting against all engine bay contaminants and insulation from extreme hot and cold temperatures.
• 100% calibrated and end-of-line tested to ensure worry-free, out-of-the-box performance
• Designed to meet or exceed all OEM specifications in fit, form & function
• Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
• Quality material – this retainer is made of durable material for long-lasting service
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost

Silver Bullet throttle body spacers create turbulence in the air flow at the point just prior entry into the engine increasing horsepower, torque and improving throttle response and fuel efficiency. Silver Bullet throttle body spacers are constructed out of durable T-6061 billet aluminum and using a unique serrated/helix entry to create turbulence at the manifold while eliminating the annoying whistle found in other helix only throttle spacers.

Product Features:

• Precision Machined From T-6061 Billet Aluminum
• Special Helix Design
• Produces Increased HP/Torque/Throttle Response
• Fits w/aFe Intakes