Hummer H1 Belts and Hoses

Essential Hummer H1 Belts and Hoses

Dayco – Idler Pulley, Dayco (Part No.89007)

Idler Pulley, Dayco

from

$30.49
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:
  • Designed for the majority of automotive vehicle applications on the road today
  • High-quality materials help resist wear and improve belt life
  • Features premium lubricated bearings to extend service life
  • Meets or exceeds OE quality
See More

Gates – DriveAlign Belt Drive Idler/Tensioner Pulley (Part No.38006)

DriveAlign Belt Drive Idler/Tensioner Pulley

from

$32.99
Gates is a leading manufacturer of Original Equipment (OE) idler pulleys. Gates DriveAlign(R) Idler Pulleys meet or exceed OE specifications. High quality, high strength bearings run cooler and last longer than original bearings. DriveAlign Idler Pulleys are built to last by resisting dirt, salt, and other under-hood contaminants. Designed for use on automobiles and light trucks as locked center tensioning, automatic belt tensioning and idler pulleys.

Product Features:
  • Steel and thermoplastic construction designed to tight manufacturing tolerances for durability and quality performance.
  • Built to last with superior resistance to dirt, salt, chemicals, and other engine compartment contaminants.
  • OE-quality fit for virtually every domestic or import vehicle on the road today
  • Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
  • Premium bearings eliminate bearing noise
  • Mounting hardware included for some popular applications
  • Reliable operation in harsh conditions
See More

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999125A)

Accessory Drive Belt Tensioner - Original Equipment Quality

from

$79.99
Litens was the Original Equipment supplier (O.E.) of this part and offers this “O.E. Exact”* part for the aftermarket. This popular tensioner designed for General Motors vehicles, looks, fits, and performs like the original part being replaced. Unlike many Non-O.E. aftermarket tensioner suppliers, the Litens part maintains the original equipment steel pulley and internal damping feature for optimal performance and life. Installation Tip: Note the Litens aftermarket tensioner maintains the inset square wrench “lift feature” on the tensioner face to facilitate belt tension release during installation. This lift-feature makes installation easier on the assembly line or in the garage. *OE Exact – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens integrated bolt/washer versus 2 separate components. Choosing The Correct Replacement Part: Both the original equipment and Litens aftermarket tensioner use a round spring versus a flat spring. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
  • Internal “round spring” technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance.
  • Installation instructions included.
  • Heavy Duty Steel Pulley
  • Professional Mechanics will change this tensioner in approx. 20 minutes
  • Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.
See More

Dayco – Automatic Belt Tensioner (Part No.89259)

Automatic Belt Tensioner

from

$85.99
The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slippage – or poor performance caused by low tension. A PTFE string wound within the spring resists abrasion and dampens noise. Dayco’s tensioner is also designed with a heavy-duty cast aluminum spring case and arm, which helps resist cracking and fatigue and offers additional strength, lessening the risk of distortion. Additional premium thermoplastic rubber spring slot plugs and rubber O-ring seals help keep contaminants out and zinc coated mounting bolts resist rust.

Product Features:
  • Endures the toughest conditions while promoting quieter performance and longer life
  • Features a steel pivot tube on specific designs for enhanced stability
  • Built to outperform and outlast competitive OE parts
See More

Dayco – Idler Pulley, Dayco (Part No.89015)

Idler Pulley, Dayco

from

$32.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:
  • Designed for the majority of automotive vehicle applications on the road today
  • High-quality materials help resist wear and improve belt life
  • Features premium lubricated bearings to extend service life
  • Meets or exceeds OE quality
See More

Dayco – Idler Pulley, Dayco (Part No.89051)

Idler Pulley, Dayco

from

$24.79
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:
  • Designed for the majority of automotive vehicle applications on the road today
  • High-quality materials help resist wear and improve belt life
  • Features premium lubricated bearings to extend service life
  • Meets or exceeds OE quality
See More

Gates – Molded 90 Degree Heater Hose (Part No.28470)

Molded 90 Degree Heater Hose

from

$25.99
Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.

Product Features:
  • Resists electrochemical degradation and water permeation
  • Use with heater hose connectors and bulk heater hose to create custom assemblies
  • Compatible for coolant, air and water applications
  • EPDM tube and cover, synthetic fiber reinforcement
  • SAE 20R3 EC Class D1, SAE 20R4 EC Class D1
  • Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
  • Caution: Do not use for fuel or oil transfer applications
See More

Dayco – Straight Heater Hose; EPDM Rubber, 5/8 Inch Diameter (sold by foot) (Part No.80271)

Straight Heater Hose; EPDM Rubber, 5/8 Inch Diameter (sold by foot)

from

$1.99
Specifically designed to carry the heated coolant from the engine block to the heater core under the dashboard and return it to the engine, this Dayco Standard Heater Hose is constructed using all EPDM compounds and spiral reinforcement for high burst strength and excellent heat resistance. Made for general service on light trucks and passenger cars, this hose is similar to SAE 20R3, Class D-2 and has a temperature rating of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). This Dayco Standard Heater Hose is compatible with all common coolant and coolant additives. Note: This hose is NOT suitable for fuel or oil transfer.

Product Features:
  • Specifically designed to be compatible with all common coolants and coolant additives
  • Constructed using all EPDM compounds and spiral reinforcements
  • Similar to SAE 20R3, Class D-2
  • Has a high burst strength and excellent heat resistance of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
  • PLEASE NOTE: Item is sold and priced by the foot. See store for details.
See More

Yukon Gear – Seal Puller Tool (Part No.56063)

Seal Puller Tool

from

$57.99
Pinion and axle seal puller. No return.

Product Features:
  • Seal puller
See More

Gates – Premium Molded Coolant Hose (Part No.20685)

Premium Molded Coolant Hose

from

$44.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Designed to withstand electrochemical degradation, the leading cause of hose failure
  • Pre-formed for a good fit and to ensure perfectly sealed connections
  • EPDM Tube; synthetic fiber knit reinforcement; EPDM cover resistant to heat, ozone and chemical refrigerants
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing clamps and connectors each time a new radiator hose is installed.
  • Warning: Do not use for fuel or oil transfer applications
See More

Gates – Premium Molded Coolant Hose (Part No.21488)

Premium Molded Coolant Hose

from

$32.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-formed for a good fit and to ensure perfectly sealed connections
  • EPDM Tube; synthetic fiber knit reinforcement; EPDM cover resistant to heat, ozone and chemical refrigerants
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing clamps and connectors each time a new cooling hose is installed.
  • Warning: Do not use for fuel or oil transfer applications
See More

Gates – Safety Stripe Standard Straight Heater Hose (Sold by foot) (Part No.28409)

Safety Stripe Standard Straight Heater Hose (Sold by foot)

from

$2.49
Premium hose constructed for long service life.

Product Features:
  • Good resistance to high temperatures for extended periods of time, which extends the service life.
  • Meets SAE 20R3 Standard Wall Class D-2 requirements
  • Temperature range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Warning: Do not use for fuel or oil transfer applications
  • PLEASE NOTE: Item is priced and sold by the foot. See store for details.
See More

Gates – Molded 90 Degree Heater Hose (Part No.28466)

Molded 90 Degree Heater Hose

from

$19.99
Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.

Product Features:
  • Resists electrochemical degradation and water permeation
  • Use with heater hose connectors and bulk heater hose to create custom assemblies
  • Compatible for coolant, air and water applications
  • EPDM tube and cover, synthetic fiber reinforcement
  • SAE 20R3 EC Class D1, SAE 20R4 EC Class D1
  • Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
  • Caution: Do not use for fuel or oil transfer applications
See More

Gates – Premium Molded Coolant Hose (Part No.22210)

Premium Molded Coolant Hose

from

$15.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically designed materials resist collapse under vacuum
  • Designed to resist electrochemical degradation, which is the leading cause of hose failure
  • Pre-shaped to fit and ensure a perfect seal
  • EPDM Tube; synthetic fiber knit reinforcement; EPDM cover resistant to heat, ozone and chemical refrigerants
  • Meets the requirements of SAE 20R4, Class D2 and DIN 73411, Class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing clamps and connectors each time a new cooling hose is installed.
  • Warning: Do not use for fuel or oil transfer applications
See More

Gates – Straight Heater Hose: EPDM, Direct Fit, 0.625" Inside Diameter (sold by foot) (Part No.28411)

Straight Heater Hose: EPDM, Direct Fit, 0.625" Inside Diameter (sold by foot)

from

$1.99
Premium hose constructed for long service life.

Product Features:
  • Good resistance to high temperatures for extended periods of time, which prolongs service life
  • Meets SAE 20R3 Standard Wall Class D-2 requirements
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • CAUTION: Do not use for fuel or oil transfer applications
  • PLEASE NOTE: Item is priced and sold by the foot. See store for details.
See More

Gates – FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt (Part No.K061015HD)

FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt

from

$74.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • The patented material provides optimal performance at prolonged extreme operating temperatures.
  • Crack and wear resistant construction, even in extreme temperatures
  • The special compound provides unprecedented flexibility, stability, load-carrying capacity and belt life.
  • Problem solver designed for the toughest applications
  • Consistently outperforms other heavy-duty serpentine belts on the market
  • Designed to save your fleet’s money and reduce downtime
  • Tensioner Replacement is Recommended (if equipped)
See More

Gates – FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt (Part No.K061187HD)

FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt

from

$77.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • The patented material provides optimal performance at prolonged extreme operating temperatures.
  • Crack and wear resistant construction, even in extreme temperatures
  • Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
  • A problem-solving tool designed for the toughest applications
  • Consistently outperforms other heavy-duty coil belts on the market
  • Engineered to save your fleet money and reduce downtime
  • Replacement of the tensioner is recommended (if equipped)
See More

Driveworks – Poly Rib Belt Serpentine Belt; 101.58 Long, 6 Rib Count (Part No.1015K6)

Poly Rib Belt Serpentine Belt; 101.58 Long, 6 Rib Count

from

$31.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Litens – Idler/Tensioner Pulley: Direct Fit, Steel, 76mm Diameter (Part No.900022A)

Idler/Tensioner Pulley: Direct Fit, Steel, 76mm Diameter

from

$34.49
This Litens pulley is manufactured by one of the largest original equipment pulley suppliers to ensure proper fit and performance. This pulley is produced for serpentine belt routing applications and conforms to original equipment material, tolerances, and specifications. This replacement part is made in the U.S.A. to the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Manufactured by one of the largest original equipment part suppliers in the world to ensure proper form, fit, and performance.
  • Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
  • Installation instructions included.
See More

Litens – Idler Pulley: Direct Fit, Steel, 76mm Diameter (Part No.900366A)

Idler Pulley: Direct Fit, Steel, 76mm Diameter

from

$40.99
This Litens supplied pulley is manufactured to original equipment specifications. This part is specifically designed for Chevrolet / GMC / Hummer applications. Heavy duty steel pulley construction ensures long life and trouble-free performance. This pulley meets or exceeds all original equipment fit, form, and performance characteristics. For maximum performance and durability, always use genuine Litens components. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. Our line is made up of over 900 ADTs, Pulleys, and OADs. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Manufactured by Litens, the largest original equipment tensioner and pulley supplier in the world, to ensure proper form, fit, and performance.
  • Heavy duty steel pulley construction
  • OE-spec sealed ball bearings with synthetic grease and double lip seals for long life
  • Installation instructions included
See More

Dorman – Idler Pulley (Pulley Only) (Part No.419-663)

Idler Pulley (Pulley Only)

from

$36.99
This replacement accessory drive belt idler pulley has been engineered to match the function and performance of the original pulley on select vehicle years, makes and models, properly restoring critical vehicle operations.

Product Features:
  • Direct replacement – this accessory drive belt idler pulley matches the fit and function of the original equipment pulley on specified vehicles
  • Restores performance – fixes a failed, squealing or groaning noise from a worn idler pulley
  • Application specific – reverse engineered from the original design on certain vehicle years, makes and models
  • Trustworthy quality – backed by team of engineers and quality specialists in the United States
See More

Felpro – Multi-Purpose O-Ring (Part No.35759)

Multi-Purpose O-Ring

from

$2.79
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Helping You Find the Right Belts and Hoses for Your Hummer H1

You love your H1. So we’ve made it easier than ever to help you find Hummer H1 Belts and Hoses in our online catalog. Our inventory holds 34 aftermarket and OEM Belts and Hoses for your Hummer H1, ranging from $1.99 to $102.99.

We offer parts from 7 brands trusted to make quality Belts and Hoses for your Hummer H1. Before you buy, take some time to read through customer reviews. We currently have 1,879 reviews of Hummer H1 Belts and Hoses from previous customers. Some of the top rated parts include Automatic Belt Tensioner with 4.6 stars and Poly Rib Belt Serpentine Belt; 118.5 Long, 6 Rib Count with 4.7 stars.

Find your H1 Belts and Hoses here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Hummer H1 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Belts and Hoses Brands for Your Hummer H1

Our inventory holds Belts and Hoses for your Hummer H1 from 7 trusted brands. You’ll find OEM and aftermarket parts from brands like Dayco, Litens, and DriveWorks, all of which can keep that Hummer happy.

Top-Rated Dayco Belts and Hoses

Leading Dayco Belts and Hoses

We carry Dayco brand parts for your Hummer H1 across several catalog categories, including Pulleys and Serpentine and V Belts. Some of our most reviewed Dayco parts include:
Idler Pulley, Dayco
from $30.49
(454)
Idler Pulley, Dayco
Belt Tensioner Pulleys
Idler Pulley, Dayco
from $32.99
(88)
Idler Pulley, Dayco
Drive Belt Idler Assemblies
Idler Pulley, Dayco
from $24.79
(58)
Idler Pulley, Dayco
Drive Belt Idler Assemblies

FAQs for Hummer H1 Belts and Hoses

What are the most purchased Belts and Hoses for the Hummer H1?

Out of 34 Belts and Hoses for the Hummer H1, the most popular in our inventory are:

What are the top-rated Hummer H1 Belts and Hoses?

Top-rated Belts and Hoses for your Hummer H1 based on customer reviews/ratings are:
Automatic Belt Tensioner
from $85.99
(10)
Automatic Belt Tensioner
“Fixed problem.”
Poly Rib Belt Serpentine Belt; 118.5 Long, 6 Rib Count
from $62.99
(7)
Poly Rib Belt Serpentine Belt; 118.5 Long, 6 Rib Count
“Perfect fit, works as expected”
Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 24 Inch Length
from $20.79
(2)
Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 24 Inch Length
“Good price and proper fit”