Hudson Wasp Parts

Name: Performance and Race Carburetor: 500 CFM, No Choke, 2 Barrel, 2300 Bore, Single Inlet
Brand: Holley
SKU: 0-4412CT
Price: 649.99 USD

Please Select your Vehicle to See Exact Fit Parts

Hudson Wasp Air Intakes

from

$649.99

Competition fuel curves provide safe and reliable horsepower for high performance race engines.

Product Features:

Gold Dichromate Finish For Corrosion Resistance w/Classic Look
Man. Choke Cable Hand Controlled For Cold Start Control
50CC Accelerator Pump For Add. Fuel Under Initial Acceleration
Power Valve Blow-Out Protection
100% Wet-Flow Tested To Assure It Arrives Ready To Run

from

$614.99

Street Avenger carburetors are known to bolt on right out of the box and Holley is excited to announce the addition of our new 2bbl Street Avenger models available in 350 and 500 CFM. Street Avenger carburetors have great features such as optimized street calibrations; three vacuum ports for all necessary vacuum accessories; factory preset electric choke for easy startups; built-in fuel filters; and an included 3/8″ fuel line connection so there are no unnecessary trips back to the parts store.

Product Features:

Vibratory Polished For Good Looks
Optimized Street Calibration That Works Out Of The Box
Factory Preset Electric Choke For Easy Startups
Built In No Trouble Fuel Inlet Filter
Provides Precise Fuel Control For Low End Torque/Acceleration
Gen Iv No Trouble Power Valve
Three Vacuum Ports [1 Pcv/Brake 1 Timed Spark 1 Full]
Limited Lifetime Warranty Defects In Material/Workmanship
100% Wet Flow Tested By Holley Technicians
Arrives Ready To Run

from

$665.99

The 0-4412 is designed as a stock replacement for 2BBL street applications as well as being mandated for some oval track racing sanctioning bodies. Whether you are looking for a replacement carburetor to replace your tired and worn factory 2BBL or one to

Product Features:

Gold Dichromate Finish For Corrosion Resistance w/Classic Look
Man. Choke Cable Hand Controlled For Cold Start Control
50CC Accelerator Pump For Add. Fuel Under Initial Acceleration
Power Valve Blow-Out Protection
100% Wet-Flow Tested To Assure It Arrives Ready To Run
Does Not Work w/A.O.D. Transmissions
Installation/Tuning DVD Incl.

from

$549.99

Vibratory Polished For Good Looks
Man. Choke Cable Hand Controlled For Cold Start Control
50CC Accelerator Pump For Add. Fuel Under Initial Acceleration
Power Valve Blow-Out Protection
100% Wet-Flow Tested To Assure It Arrives Ready To Run

from

$921.99

Xtreme Performance – Holley Ultra XP(TM) Circle Track Carburetors! Ultra XP carbs are 38% lighter than our original HP, have fuel capacity that is 20% greater and 30 other new features! They’re available in our Hard Core Gray(TM) hard coat anodized finish with Black(TM) billet for improved corrosion protection & also available in natural tumble-polished aluminum with Black(TM) metering blocks and base plate. The Aluminum Ultra XP Cirlce Tracks are available in 650 & 750 CFM’s. Holley Ultra XP carburetors are Specifically Calibrated for Circle Track & offer new features such as anti-siphon valve in the main body; high capacity HP bowls which feature 20% more fuel capacity to eliminate starvation, integrated fuel shelf to minimize fuel aeration and internal baffling to control fuel slosh. Other features include all aluminum construction, fully tunable billet metering blocks, billet base plate, wedge floats, adjustable secondary linkage and knurled (hand adjustable) curb idle screws. Holley Ultra XP carburetors are the ultimate in square bore race carburetors!

Product Features:

All Aluminum Construction
No Choke Tower For Unobstructed Airflow
Air Bleeds Moved Outward Allow Smoother Transition Of Airflow
Down-Leg Boosters For Improved Fuel Signal
Contoured Hex Head Squirter Screw For Streamlined Airflow
Internal Pump Passage On Metering Block w/Tunable Bleed Off
Built In Drain Plug Provides Easy Access to Empty Bowl
Fuel Bowl Provides 20% More Fuel Capacity Controls Slosh
Clear Sight Window On Both Sides Of Bowl For Fuel Level Adjust

from

$819.99

All Aluminum Construction
No Choke Tower For Unobstructed Airflow
Air Bleeds Moved Outward Allow Smoother Transition Of Airflow
Down-Leg Boosters For Improved Fuel Signal
Contoured Hex Head Squirter Screw For Streamlined Airflow
Internal Pump Passage On Metering Block w/Tunable Bleed Off
Built In Drain Plug Provides Easy Access to Empty Bowl
Fuel Bowl Provides 20% More Fuel Capacity Controls Slosh
Clear Sight Window On Both Sides Of Bowl For Fuel Level Adjust

Hudson Wasp Transmission Parts

from

$4.29

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION — Crowned raceways for even load distribution
OE-STYLE DESIGN — Engineered to meet OE specifications
COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$13.29

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$8.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$3.29

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: springless; single-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$13.99

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$23.99

Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$9.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$9.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$8.79

Design type: springless; single-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$16.49

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

Hudson Wasp Belts and Hoses

from

$27.99

The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.

Product Features:

Designed to meet OE specifications
Not suitable for oil or heat transfer
Meets SAE J20R4, Class D-2 requirements for improved service hoses
This hose is designed to prevent splitting, ballooning, and elongation

from

$12.99

Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.

Product Features:

Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
Provides greater durability and flexibility – 35% stronger than all previous versions
Features specially treated cords for added strength, stability and reliability

from

$4.99

Driveworks engineered to conform to high mileage, worn or misaligned drives without a sacrifice in quiet, long-lasting performance. Constructed with Aramid reinforced EPDM compounds, it delivers more than OE required quality… it delivers the solution to troublesome drive problems. Driveworks Poly-Rib Belts meet or exceed SAE J1459 and SAE J2432 specifications.

Product Features:

Aramid noise resistant fibers embedded in the rubber make this belt run quieter in worn or misaligned pulleys
No-Noise Advanced Design EPDM rubber compound for quiet extended life

from

$39.99

Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:

Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
Ground to ensure precise dimensional control of the top width and side wall for proper fit to the pulley.
Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
It resists oil, heat, ozone, weather, and decay to improve belt life.
Meets or exceeds SAE J636C specifications

from

$31.99

Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
The shape is rectified to ensure precise dimensional control of the top width and side wall for a proper fit to the pulley.
Thermoactive traction ropes for maintenance-free performance when properly installed and tensioned
It resists oil, heat, ozone, weather, and decay to improve belt life.
Meets or exceeds SAE J636C specifications

from

$23.99

Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
Thermally active tension cords for maintenance-free operation when the belt is properly installed and tensioned
It resists oil, heat, ozone, weather, and decay to improve belt life.
Meets or exceeds SAE J636C specifications

from

$46.99

Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.

Product Features:

Molded notches reduce bending stress, especially on small diameter pulleys, while dissipating heat
High modulus, high strength tensile cord
Oil and heat-resistant construction throughout
Meets SAE J636b and SAE J637 specifications
It meets RMA standards for oil and heat resistance and static conductivity requirements
NOTE: Some sizes are available as Gates PowerBand V-belts.

from

$12.99

Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability & reliability required for vehicles that still need a heavy-duty V-belt.

Product Features:

Designed for efficient power transmission to vehicle accessories in today’s trucks and buses.
Provides greater durability and flexibility – 35% stronger than all previous versions
Provides greater durability and flexibility – 35% stronger than all previous versions
áProvides greater durability and flexibility – 35% stronger than all previous versions

from

$30.99

The fiber-reinforced rubber support adds flexibility along the belt and provides greater lateral stability on the pulley.
Ground to ensure precise dimensional control of the top width and side wall for proper fit to the pulley.
Thermoactive traction ropes for maintenance-free performance when properly installed and tensioned
Resists oil, heat, ozone, weather and aging for improved belt life
Meets or exceeds SAE J636C specifications

from

$5.29

The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:

This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
Polyester cords provide extreme tension-holding capability for longer belt life
The raw edge belt design delivers the maximum gripping power
The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration

from

$27.49

Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.

Product Features:

Provides greater durability and flexibility – 35% stronger than all previous versions
Prevents electromechanical interference issues on modern vehicles
Resists heat, oil and grease

from

$50.99

The fiber-reinforced rubber support adds flexibility along the belt and provides greater lateral stability on the pulley.
Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
Resists oil, heat, ozone, weather and aging for improved belt life
Meets or exceeds SAE J636C specifications

from

$16.79

Provides greater durability and flexibility – 35% stronger than all previous versions
Prevents electromechanical interference issues on modern vehicles
Resists heat, oil and grease

from

$26.99

Designed to meet OE specifications
Not suitable for oil or heat transfer
Meets SAE J20R4, Class D-2 requirements for improved service hoses
This hose is designed to prevent splitting, ballooning, and elongation

Hudson Wasp Fuel and Emissions Systems

from

$24.99

Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:

Passes all state and federal emissions tests
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$11.99

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Reduces air pollution with proper sealing and venting
Independently tested for emission control

Hudson Wasp Steering and Chassis Parts

from

$269.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Improves steering response
Repairs worn components
Reduces vibration
Reduces tire wear

from

$239.99

Rare Parts prides itself in only manufacturing high quality chassis parts. Diamond Series parts will exceed OEM and aftermarket products. Examples would be: forged verses stamped housings, greaseable, tighter machining tolerances, and proper heat treat of ball studs and mating components. Every Diamond Series part is tested and inspected in our facility prior to being sold. So rest assured you are getting a quality part when quality counts.

Product Features:

Complete rebuild kit
Precision machine components
Made in the USA
Improves steering response

from

$36.99

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$139.99

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$69.99

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$139.99

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$19.49

Product Features:

BUILT TO LAST: Advanced heat treatment process for strength
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$15.99

Product Features:

CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION: Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

Looking for the best Hudson Wasp aftermarket replacement parts? Replacing worn and broken parts on your Hudson Wasp? Check out our online catalog to find the best selection of aftermarket Hudson Wasp parts as well as real user reviews on Hudson Wasp replacement parts. Make an informed decision about every component you add to your Wasp.

At Advance Auto, we’ve got you covered when it comes to getting your Hudson Wasp in tip top condition. We’ve got over 149 Hudson Wasp parts to choose from in popular categories like Air Intakes, Transmission Parts and Belts and Hoses. If you’re looking for the best prices, try searching our Hudson Wasp parts catalog to compare OEM and aftermarket parts for your Hudson Wasp.

Whether you need Hudson Wasp body parts, interior components, or custom Hudson Wasp parts you can find them online at Advance Auto. Want to order your Fuel and Emissions Systems online? Or maybe you need your Hudson Steering and Chassis Parts same day? No problem, you can pick up Wasp parts in person at locations across the country, or have them delivered to straight to your door after ordering online. Finding a great deal on new and used Hudson Wasp parts has never been easier.

Advance Auto customers frequently search for the following types of Hudson Wasp auto parts. Check out customer reviews and ratings, and compare prices on the following Hudson Wasp parts:

People also search Advance Auto for these popular years of the Hudson Wasp:

Hudson Wasp Parts

Holley – Performance and Race Carburetor: 500 CFM, No Choke, 2 Barrel, 2300 Bore, Single Inlet (Part No.0-4412CT)

Holley – Street Carburetor: 500 CFM, Electric Choke, 2 Barrel, 2300 Bore, Single Inlet, Shiny (Part No.0-80500)

Holley – Street Carburetor: 500 CFM, Manual Choke, 2 Barrel, 2300 Bore, Single Inlet, Gold Dichromate (Part No.0-4412C)

Holley – Street Carburetor: 500 CFM, Manual Choke, 2 Barrel, 2300 Bore, Single Inlet, Shiny (Part No.0-4412S)

Holley – Performance and Race Carburetor: 500 CFM, No Choke, 2 Barrel, 2300 Bore, Single Inlet (Part No.0-4412HBX)

Holley – Performance and Race Carburetor: 500 CFM, No Choke, 2 Barrel, 2300 Bore, Dual Inlet, Shiny (Part No.0-4412BKX)

National – Bearing Race (Part No.LM67010)

National – Bearing Race (Part No.25821)

Driveworks – Taper Bearing Set (Part No.S-A-2)

National – Multi-Purpose Seal (Part No.240698)

Driveworks – Oil Seal (Part No.S-5778)

National – Tapered Roller Bearing Cone (Part No.25877)

National – Multi-Purpose Seal (Part No.470059)

National – Bearings (Part No.15245)

National – Multi-Purpose Seal (Part No.340797)

National – Multi-Purpose Seal (Part No.7038SA)

Dayco – Flex Radiator Hoses; EPDM Rubber, 13.88 Inch Long, 1.5 Inch Inner Dia. (Part No.81151)

Dayco – Bottom Cog V-Belt; 38.5 Inch Long, Exact Fit Premium Quality (Part No.17385)

Driveworks – Automotive V-Belt, Driveworks (Part No.38517)

Gates – Automotive XL High Capacity V-Belt (Part No.9390)

Gates – Automotive XL High Capacity V-Belt (Part No.9480)

Gates – Automotive XL High Capacity V-Belt (Part No.9300)

Gates – Green Stripe Truck & Bus Series V-Belt (Part No.TR28423)

Dayco – V-Belt, Top Cog, Dayco (Part No.24405)

Gates – Automotive XL High Capacity V-Belt (Part No.9590)

Driveworks – Automotive V-Belt, Driveworks (Part No.42513)

Dayco – Bottom Cog V-Belt; 51.5 Inch Long, Exact Fit Premium Quality (Part No.15515)

Gates – Automotive XL High Capacity V-Belt (Part No.9570)

Dayco – Bottom Cog V-Belt; 42.5 Inch Long, Exact Fit Premium Quality (Part No.15425)

Dayco – Flex Radiator Hoses; EPDM Rubber, 15.75 Inch Long, 1.5 Inch Inner Dia. (Part No.81161)

Carquest Premium – Non-Locking Fuel Tank Cap (Part No.10624)

Carquest Premium – Non-Locking Fuel Tank Cap (Part No.10625)

Rare Parts – Idler Arm Repair Kit (Part No.RP20316)

Rare Parts – Idler Arm Repair Kit (Part No.RP20311)

Rare Parts – Tie Rod End (Part No.RP26311)

Rare Parts – Tie Rod End (Part No.RP25288)

Rare Parts – Tie Rod End (Part No.RP25246)

Rare Parts – Tie Rod End (Part No.RP25289)

National – Multi-Purpose Bearing (Part No.203)

National – Multi-Purpose Bearing (Part No.A-2)