Honda Fit Exhaust System Kits

The MagnaFlow NEO Series Cat-back Acura Integra/Honda Civic Si Performance Exhaust System No. 19600 is engineered to enhance the sound and performance of your sporty compact’s 1.5L I4 engine with improved airflow and a fresh take on MagnaFlow’s signature exhaust sound. Passersby and passengers in your 2023-2024 Acura Integra or 2022-2024 Honda Civic Si will know that more than just the VTEC kicked in when your right foot sends your car’s four-banger barreling towards its redline with a ferocity that the stock Civic Si and Integra simply can’t match. Improved exhaust flow is made possible thanks to the system’s 2.5″ mandrel bent main tubing with dual 4″x 4″ x 11″ NDT (No Drone Technology) resonators, terminating in a dual split rear exit with 4.5″ carbon fiber tips. Exhaust kit No. 19600’s integration of MagnaFlow’s No Drone Technology ensures that unwanted droning noises are kept in check at cruising speeds while allowing you to enjoy all the other epic engine sounds your NEO Series system makes possible. No. 19600’s easy-to-install, direct-fit bolt-on design replaces all major exhaust components from near the catalytic converter on back and is made entirely of durable, corrosion resistant stainless steel (except the carbon fiber tips), all covered by MagnaFlow’s limited construction warranty.

Product Features:

• No-Drone-Technology (NDT) allows for a quiet cabin
• Increased Horsepower and Torque
• 100% Stainless Steel

The BORLA(R) Cat-Back(TM) Name Implies The Exhaust System Is Located Behind The Factory Catalytic Converter Where There Factory Emissions Remain Untouched And Vehicle Stays Emissions Compliant. This Remains Distinct From The Axle Back Exhaust System that Is Located Behind The Rear Axle.

Product Features:

• Increases The Overall Sound Level And Performance
• Cat-Back(TM) Performance Exhaust System Replaces The Factory Exhaust System Following The Same Exhaust Path And Secured Using The Original Vehicle Hangars And Rubber Isolators
• Pioneered The Automotive Exhaust Aftermarket In Exhausts Constructed In Aircraft Grade 304 Stainless Steel Tubing, A Material With Higher Content Of Carbon And Nickel That Will Not Rust Or Corrode
• Easy Bolt-On Installation
• Aggressive S-Type Sound Under Acceleration, No Drone At Highway Speeds

Add power, sound and taste to your Accord with this Takeda cat-back system. 2-1/2″ to 1-3/4″ mandrel bent, 304 stainless steel tubing improves exhaust flow to deliver up to +13 HP and +16 lbs. x ft. torque. 100% hand TIG-welded for long lasting strength and durability, this Takeda system incorporates dual, high-flow 304 stainless steel mufflers to maintain an aggressive tone. Dual, oval, angle-cut tips etched with the Takeda logo gives your Accord a track-style, custom appearance.

Product Features:

• Brush Finished 304 Stainless Steel For Performance and Good Looks
• Dual Stainless Steel Mufflers Delivers A Deep Aggressive Tone
• Dual Oval Tips w/Etched Takeda Logo Give A Custom Appearance
• 100% Hand TIG-Welded For Strength and Durability

The MagnaFlow Honda Civic NEO Series Cat-Back Performance Exhaust System No. 19612 upgrades your 2022-2025 Honda Civic EX or Touring’s 1.5L engine with dyno-proven performance and the latest version of our signature exhaust sound. This performance exhaust kit is designed to replace all your Civic’s OEM exhaust components from near the catalytic converter on back and utilizes an easy to install direct-fit design with all connections flanged. No. 19612 features 2.25″ diameter mandrel bent main piping that passes through a 14″ round straight-through performance muffler and two 11″ straight-through oval performance mufflers before ending in a dual split rear exit with 4″ double-wall angle cut dry carbon fiber tips. Each of these Honda Civic performance exhaust systems is produced using advanced CNC precision robotic manufacturing techniques and made of durable, corrosion resistant stainless steel, all backed by MagnaFlow’s limited warranty.

Product Features:

• No-Drone-Technology (NDT) allows for a quiet cabin
• Increased Horsepower and Torque
• 100% Stainless Steel

Unleash performance gains of up to +10 HP and +11 lbs. x ft. torque with aFe’s Takeda 3″-2 ½” mandrel bent, 304 stainless steel cat-back exhaust system for your Honda Civic Si Coupe with L4-1.5L (t) engine. This exhaust system is 100% hand TIG-welded by certified craftsmen for race proven strength and durability and designed with dual, free-flowing 304 stainless steel muffler s to improve performance across the power band while maintaining an aggressive tone and long lasting, good looks. Finished with dual 4-3/4″ X 4-1/4″ oval polished stainless steel tips and etched with Takeda brand logos gives the Civic Si a stylish, custom appearance.

Product Features:

• Mandrel Bent Stainless Steel Tubing
• Dual Free Flowing Stainless Steel Mufflers
• Mufflers Deliver a Deep Aggressive Tone
• Dual Rear Exit Stainless Steel Tips

aFe is proud to introduce the new Takeda Dual Cat-Back Exhaust System for the 13-14 Honda Accord LX, EX, EX-L Sedan L4-2.4L. In recent testing this system produced 13 horsepower and 16 lbs. x ft. of torque. This exhaust starts out with an OE style flange and uses 2.5in. mandrel bent 304 stainless steel tubing and merges into dual 2.5in. tubing which improves performance across the power band while maintains a great tone. The dual, high flow, polished 304 stainless steel mufflers give an aggressive sound at high RPMs, yet maintaining a subtle tone at cruising speeds. To finish off this 100% TIG-welded exhaust are dual, Takeda laser etched, double wall, angle cut 304 stainless steel tips. This exhaust is designed to convert the standard L4 single exhaust into a sporty dual exhaust. It is a direct bolt on system which requires no cutting or drilling and includes all necessary hardware for a hassle free installation.

Product Features:

• Single To Dual Exhaust Conversion
• Direct Bolt-On System
• No Cutting Or Drilling
• Includes All Necessary Hardware

BORLA(R) Cat-Back(TM) And Axle-Back exhaust systems feature patented straight-through and multi-core technology to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive BORLA(R) Sound of Power respected by motoring enthusiasts everywhere.

Product Features:

• Built From Premium T-304 Austenitic Stainless Steel, Superior To T-400 Series Knockoffs, To Give You The Absolute Best In Performance And Durability
• Straight-Through And Multi-Core Technology To Unleash Hidden Horsepower
• Increased Exhaust Velocity Adds Power, Driving Excitement, Fuel Economy, And The Distinctive Sound Of Power Respected By Motoring Enthusiasts Everywhere
• System Features Polished T-304 Stainless Steel Tips
• Ultra-Smooth Mandrel Bends Ensure Maximum Flow And Power, And Precision Computer-Controlled CNC Manufacturing Ensures An Accurate Fit

The MagnaFlow Honda Ridgeline NEO Series Cat-Back Performance Exhaust System No. 19633 adds a healthy serving of dyno-proven performance and a modern, aggressive exhaust note to your 2021-2024 Honda Ridgeline equipped with the 3.5L engine option. This exhaust kit is designed to replace all OEM exhaust components from near the catalytic converter on back. Bystanders will know something is up when your truck pulls away from the rest of the vehicles at each stoplight with a quick launch and a triumphant roar, leaving everyone else in its wake. This increase in performance is made possible by the redesigned exhaust, which features 2.5″ mandrel bent main piping that passes through an 18″ oval straight through muffler before smoothly transitioning via a Y-pipe to a single-to-dual split rear exit with 4″ double wall, angle-cut and logo etched tips finished in black chrome. No. 19633 is made of durable, corrosion resistant stainless steel and produced using advanced CNC precision robotic manufacturing techniques for an OEM-like, easy to install direct-fit design. MagnaFlow stands by this Honda Ridgeline performance exhaust with our limited construction warranty.

Product Features:

• No-Drone-Technology (NDT) allows for a quiet cabin
• Increased Horsepower and Torque
• 100% Stainless Steel

The MagnaFlow 2018-2022 Honda Accord Street Series Cat-Back Performance Exhaust System brings out the personality of your 2.0L 2018-2022 Honda Accord with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 3 Straight-Through mufflers ending in a Dual Split Rear exit, this Honda Accord exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Honda Accord’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19393 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19393 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited finish warranty and limited construction warranty.

Product Features:

• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques
• Dyno-proven performance

The MagnaFlow 2016-2021 Honda Civic Street Series Cat-Back Performance Exhaust System brings out the personality of your 1.5L 2016-2021 Honda Civic with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.25in. main piping and 3 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Honda Civic exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Honda Civic’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19312 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19312 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited finish warranty and limited construction warranty.

Product Features:

• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques
• Dyno-proven performance

Add power, sound and taste to your Accord with this Takeda axle-back system. 2-1/4″ to 1-3/4″ mandrel bent, 304 stainless steel tubing improves exhaust flow to deliver up to +7 HP and +7 lbs. x ft. torque. 100% hand TIG-welded for long lasting strength and durability, this Takeda system incorporates dual, high-flow 304 stainless steel mufflers to maintain an aggressive tone. Dual, angle-cut tips etched with the Takeda logo gives your Accord a track-style, custom appearance.

Product Features:

• Brush Finished 304 Stainless Steel For Performance and Good Looks
• Dual Stainless Steel Mufflers Delivers A Deep Aggressive Tone
• Dual Oval Tips w/Etched Takeda Logo Give A Custom Appearance
• 100% Hand TIG-Welded For Strength and Durability

The MagnaFlow 2017-2020 Honda Civic Competition Series Cat-Back Performance Exhaust System brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we’re so well known for. This exhaust kit is designed to enhance your 1.5L 2017-2020 Honda Civic with dyno-proven performance made possible thanks to fast-flowing mandrel bent 2.5in. main piping and 3 Straight-Through mufflers ending in a Dual Center Rear exit with 4.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips featuring a sporty finish. The exhaust system’s cat-back layout replaces your ride’s exhaust system from near the catalytic converter on back. Exhaust system 19394 is engineered to make your vehicle’s engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 19394’s direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100 percent durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow’s limited warranty. Please check to ensure compliance with local noise regulations.

Product Features:

• Crafted from 409 stainless steel with all mandrel-bent tubing
• Increased horsepower and torque
• Aggressive exterior sound

Borla Performance Industries is the pioneer and leader in the design and manufacture of stainless steel performance exhaust. We began two decades ago as a manufacturer of exhaust systems for such “concours classics” as Rolls-Royce and Ferrari cars and have evolved into the premier manufacturer of today’s performance vehicles for the street, off-road, and racing.Borla is proud to offer a true “Made in the USA” product sold around the world. We are a company of motorheads, and it shows in our products, customer service, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows. Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability. Unlike any other exhaust brand, Borla’systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics,soundand more.

Product Features:

• Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive powerful sound
• Each system is built from premium, high-quality austenitic T-304 stainless steel
• Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer-controlled CNC manufacturing ensures an accurate fit

The MagnaFlow 2008-2012 Honda Accord Street Series Cat-Back Performance Exhaust System brings out the personality of your 3.5L 2008-2012 Honda Accord with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.25in. main piping and 3 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Straight Cut Rolled Edge tips, this Honda Accord exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Honda Accord’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16817 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16817 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited finish warranty and limited construction warranty.

Product Features:

• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques
• Dyno-proven performance

The MagnaFlow 1998-2002 Honda Accord Street Series Cat-Back Performance Exhaust System brings out the personality of your 3.0L 1998-2002 Honda Accord with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.25in. main piping and 3 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Honda Accord exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Honda Accord’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15640 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15640 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited finish warranty and limited construction warranty.

Product Features:

• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques
• Dyno-proven performance

aFe is proud to introduce the new Takeda Axle Back Exhaust System. All aFe exhaust systems are engineered and manufactured in our Corona California manufacturing facility. This system uses factory mounting locations providing stability and hassle free installation. High quality OE style flange and band clamps are used for a complete 360 degree sealing surface. Dual free flowing mufflers are used to absorb high pitch tones producing a powerful sound and unleashing all available horse power and torque.

Product Features:

• Simple Installation
• Leak Free Seal
• Polished 304 Stainless Steel Free Flowing Muffler

aFe is proud to introduce the new Takeda Axle Back Exhaust System for the 2013-2016 Honda Accord Sport Sedan L4-2.4L. In recent testing this system produced 7 horsepower and 7 lbs. x ft. of torque. This exhaust starts out with an OE style flange and uses 2.25in tubing that merges into dual 1.75in tubing which improves performance across the power band while maintaining a great tone. TIG-welded and brushed finish mandrel bent 304 stainless steel for maximum strength and durability, this system is equipped with dual high flow, polished mufflers for maximum flow and performance. To finish off this exhaust are dual laser etched, double wall, angle cut 304 stainless steel tips. This exhaust uses all factory hanger locations for a hassle free installation. No modifications necessary.

Product Features:

• Produces An Astonishing 7 HP And 7 ft./lbs. Of Torque
• 2.25 in. To 1.75 in. Mandrel Bent Tubing
• Equipped w/Dual High Flow Mufflers For Maximum Performance
• Includes Laser Etched; Double Wall; Angle Cut Polished Steel Tips

The MagnaFlow 2017-2020 Honda Ridgeline Street Series Cat-Back Performance Exhaust System brings out the personality of your 3.5L 2017-2020 Honda Ridgeline with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Honda Ridgeline exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Honda Ridgeline’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19364 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19364 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited finish warranty and limited construction warranty.

Product Features:

• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques
• Dyno-proven performance

This unique dual transverse exhaust system is constructed form mandrel bent stainless steel and is TIG welded. This system was designed and engineered by tuning the perfect tube lengths; ultimately maximizing performance across the power band while maintaining a great tone. aFe carefully engineered this system to maintain distinct exhaust tones. All exhaust syst ems are engineered and manufactured in our Corona California manufacturing facility. All systems use factory mounting locations providing stability and hassle free installation. High quality band clamps are used for a complete 360 degree sealing surface. Dual free flowing transverse mufflers are used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.

Product Features:

• Incl. High Flow Muffler
• 2.5 in. Dia. Stainless Steel
• 100% Hand MIG Welded
• Dual 304 Double Wall Angle Cut Tips

aFe is proud to introduce the new Takeda Axle Back Exhaust System. All aFe exhaust systems are engineered and manufactured in our Corona California manufacturing facility. This system uses factory mounting locations providing stability and hassle free installation. High quality OE style flange and band clamps are used for a complete 360 degree sealing surface. Dual free flowing mufflers are used to absorb high pitch tones producing a powerful sound and unleashing all available horse power and torque.

Product Features:

• 4 in. Slash Cut/Double Wall/304 Stainless Steel Round Tip
• 2.5 in. Dia. 304 Stainless Steel Brushed Finish Tubing
• Axle-Back
• No Modification Necessary

aFe is proud to introduce the new Takeda Axle Back Exhaust System. All aFe exhaust systems are engineered and manufactured in our Corona California manufacturing facility. This system uses factory mounting locations providing stability and hassle free installation. High quality OE style flange and band clamps are used for a complete 360 degree sealing surface. Dual free flowing mufflers are used to absorb high pitch tones producing a powerful sound and unleashing all available horse power and torque.

Product Features:

• Polished 304 Stainless Steel High Flow Muffler
• 2.5 in. Dia. Stainless Steel
• 3.5 in. Dia. Slash cut Double Wall Tip
• 100% Hand TIG Welded Headers

aFe is proud to introduce the new Takeda Axle Back Exhaust System. All aFe exhaust systems are engineered and manufactured in our Corona California manufacturing facility. This system uses factory mounting locations providing stability and hassle free installation. High quality OE style flange and band clamps are used for a complete 360 degree sealing surface. Dual free flowing mufflers are used to absorb high pitch tones producing a powerful sound and unleashing all available horse power and torque.

Product Features:

• Simple Installation
• Leak Free Seal
• Polished 304 Stainless Steel Free Flowing Muffler

BRExhaust Direct-Fit Replacement Exhaust Kit 106-0743 takes the guesswork out of replacing your 2006-2011 Honda Civic 2.0L exhaust system while providing a reliable and high-quality alternative to the OEM exhaust. You will find all of the gaskets and clamps needed to get the job done in the carefully packaged box. 106-0743’s precision mandrel bent pipes facilitate superior exhaust flow compared to the crush-bent pipes commonly used in competing aftermarket replacement exhaust systems. The multi-piece, bolt-on design ensures the exhaust system is easy to install yourself and fits perfectly to help get you back on the road in no time. No bending or welding is required for installation. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0743 features durable aluminized steel construction and is covered by a limited warranty. BRExhaust 106-0743 is engineered for OEM 18220SNXA01 exhaust replacement.

Product Features:

• Complete mandrel-bent replacement of all parts from behind or near the last catalytic converter, offering long-lasting, high corrosion resistance and durability
• Bolt-on, multi-piece design for smooth and easy DIY installation around obstructions, ensuring quality fitment and function without requiring fabrication
• All components, gaskets, clamps, and hardware required, along with installation instructions, are packaged together in a single protective box
• Leaves all emissions equipment intact, maintaining emissions compliance

BORLA(R) Cat-Back(TM) And Axle-Back exhaust systems feature patented straight-through and multi-core technology to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive BORLA(R) Sound of Power respected by motoring enthusiasts everywhere.

Product Features:

• Built From Premium T-304 Austenitic Stainless Steel, Superior To T-400 Series Knockoffs, To Give You The Absolute Best In Performance And Durability
• Straight-Through And Multi-Core Technology To Unleash Hidden Horsepower
• Increased Exhaust Velocity Adds Power, Driving Excitement, Fuel Economy, And The Distinctive Sound Of Power Respected By Motoring Enthusiasts Everywhere
• System Features Polished T-304 Stainless Steel Tips
• Ultra-Smooth Mandrel Bends Ensure Maximum Flow And Power, And Precision Computer-Controlled CNC Manufacturing Ensures An Accurate Fit

BRExhaust Direct-Fit Replacement Exhaust Kit 106-0804 takes the guesswork out of replacing your 2009-2013 Honda Fit 1.5L exhaust system while providing a reliable and high-quality alternative to the OEM exhaust. You will find all of the gaskets and clamps needed to get the job done in the carefully packaged box. 106-0804’s precision mandrel bent pipes facilitate superior exhaust flow compared to the crush-bent pipes commonly used in competing aftermarket replacement exhaust systems. The multi-piece, bolt-on design ensures the exhaust system is easy to install yourself and fits perfectly to help get you back on the road in no time. No bending or welding is required for installation. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0804 features durable aluminized steel construction. BRExhaust 106-0804 is engineered for OEM 18220TK6A01 exhaust replacement.

Product Features:

• Complete mandrel-bent replacement of all parts from behind or near the last catalytic converter, offering long-lasting, high corrosion resistance and durability
• Bolt-on, multi-piece design for smooth and easy DIY installation around obstructions, ensuring quality fitment and function without requiring fabrication
• All components, gaskets, clamps, and hardware required, along with installation instructions, are packaged together in a single protective box
• Leaves all emissions equipment intact, maintaining emissions compliance